SCREWFIX 3132 Outdoor Golf Ball Brick Light Black Instruction Manual

June 5, 2024
SCREWFIX

SCREWFIX 3132 Outdoor Golf Ball Brick Light Black

SCREWFIX 3132 Outdoor Golf Ball Brick Light Black

In The Box

SCREWFIX 3132 Outdoor Golf Ball Brick Light Black 1

Installation

IMPORTANT – Please read carefully the separate safety guide before use. SCREWFIX 3132 Outdoor Golf Ball Brick Light Black 5 SCREWFIX 3132 Outdoor Golf Ball Brick Light Black
11 SCREWFIX 3132 Outdoor Golf Ball Brick
Light Black 12 SCREWFIX 3132 Outdoor Golf Ball
Brick Light Black 13

Maintenance

SCREWFIX 3132 Outdoor Golf Ball Brick Light Black 17

Care

SCREWFIX 3132 Outdoor Golf Ball Brick Light Black 20

Guarantee

  •  We take special care to select high quality materials and use manufacturing techniques that allow us to create products incorporating design and durability. This product LAP has a manufacturer’s guarantee of 3 years against manufacturing defects, from the date of purchase (if bought in store) or date of delivery (if bought online), at no additional cost for normal (non-professional or commercial) household use.
  •  To make a claim under this guarantee, you must present your proof of purchase (such as a sales receipt, purchase invoice or other evidence admissible under applicable law), please keep your proof of purchase in a safe place. For this guarantee to apply, the product you purchased must be new, it will not apply to second hand or display products. Unless stated otherwise by applicable law, any replacement product issued under this guarantee will only be guaranteed until expiry of the original period guarantee period.
  •  This guarantee covers product failures and malfunctions provided the product was used for the purpose for which it is intended and subject to installation, cleaning, care and maintenance in accordance with the information contained in these terms and conditions, in the user manual and standard practice, provided that standard practice does not conflict with the user manual.
  •  This guarantee does not cover defects and damage caused by normal wear and tear or damage that could be the result of improper use, faulty installation or assembly, neglect, accident, misuse, or modification of the product.
  • Unless stated otherwise by applicable law, this guarantee will not cover, in any case, ancillary costs (shipping, movement, costs of uninstalling and reinstalling, labour etc), or direct and indirect damage.
  •  If the product is defective, we will, within a reasonable time, replace or refund.
  •  Rights under this guarantee are enforceable in the country in which you purchased this product. Guarantee related queries should be addressed to the store you purchased this product from.
  •  The guarantee is in addition to and does not affect your statutory rights.

Safety

  •  These instructions are for your safety. Please read through them thoroughly prior to installation and retain them for future reference.
  •  All fittings must be installed by a competent person in accordance with local regulations (IET wiring regulation BS7671).
  •  Check the pack and make sure you have all of the parts listed.
  •  Remove all packaging, wrap etc from the product.
  •  Decide on the appropriate location for your product.
  •  The product is designed to be fitted horizontally and vertically in decking, walls, steps etc. It is not suitable for installation directly into the ground. Never cover the product.
  •  CAUTION: IP44 is guaranteed when the product is properly installed and sealed.
  •  Always avoid the product to be located at corrosive environment.
  •  Always refer to the installation drawing for the orientation of the product.
  •  IMPORTANT: The fixing point(s) selected must be capable of supporting the full weight of the light fitting.
  •  It is always recommended to cut the hole slightly smaller than the size specified, and then file the hole until the recessed unit fits snugly.
  •  Wiring diagram is for reference only. Always refer to the terminal marking for wiring. Ensure that all electrical connections are tight and that no loose strands are left out of the terminal block.
  •  When the product does not light after installation:
  •  Ensure there is no electricity failure
  •  Ensure all the connections are secured
  •  If you have any doubt about installation/use of this product, consult a qualified electrician.
  •  Always disconnect the product from mains at least 10 minutes allowing to cool down before any maintenance or adjustment.
  •  It is recommended to have a regular schedule of care and maintenance to keep the surface condition well.

Technical Data

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals