PHILIPS Lighting BGP472 LED180 LineBase Light Owner’s Manual
- August 28, 2024
- PHILIPS Lighting
Table of Contents
PHILIPS Lighting BGP472 LED180 LineBase Light Owner’s Manual
Line Base, 19190 lm, 150 W, 740 neutral white, Analog, Safety class I
Line Base is breakthrough lighting for the city tunnel, underpass. It’s a
really and amazingly linear lighting yet easy to install, and it’s the ideal
solution to replace fluorescent lighting. The customised lumen output of Line
Base enables lighting designers to have freedom on lighting layout. Its
continuous installation is to create a seamless, brighter, comfortable visual
effect with less flicker. Its plug-and-play electrical connection and remote
waterproof drivers save total cost of owner. The products pass kinds of safety
and durability test to prove a long lifespan on its operation.
Warnings and Safety
- Strongly recommended to use surge protection device in electricity cabinet to wire luminaires
Product data
General Information
Driver included| Yes
Light Technical
Luminous Flux| 19,190 lm
Luminous Efficacy (rated) (Nom)| 120 lm/W
Correlated Color Temperature (Nom)| 4000 K
Color rendering index (CRI)| >70
Light source color| 740 neutral white
Optical cover type| Poly carbonate Diffuser
Operating and Electrical
Input Voltage| 220-240 V
Line Frequency| 50 or 60 Hz
Inrush current| 44 A
Power Consumption| 150 W
Power Factor (Fraction)| 0.9
Connection| Connection unit 2-pole
Cable| Cable 0.3 m with connector 2-pole
Temperature
Ambient temperature range| -40 to +50 °C
LineBase
Controls and Dimming
Dimmable| Yes
Control interface| Analog
Mechanical and Housing
Housing Material| Aluminum Alloy
Optical cover material| Poly carbonate
Housing Color| Aluminum
Overall length| 1,185 mm
Overall width| 120 mm
Overall height| 88 mm
Effective projected area| 0.064 m²
Dimensions (Height x Width x Depth)| 88 x 120 x 1185 mm
Approval and Application
Ingress protection code| IP66 [Dust penetration-protected, jet-proof]
Mech. impact protection code| IK05 [0.7 J]
Protection class IEC| Safety class I
Flammability mark| –
CE mark| –
Initial Performance (IEC Compliant)
Luminous flux tolerance| +/-10%
Initial chromatically| (0.3831,0.3798) 5
Power consumption tolerance| +/-10%
Product Data
Order product name| BGP472 LED180 NW 150W G2 F
Full product name| BGP472 LED180 NW 150W G2 F
Order code| 911401698807
Material Nr. (12NC)| 911401698807
Numerator – Quantity Per Pack| 1
Net Weight (Piece)| 5.690 kg
Numerator – Packs per outer box| 2
Dimensional drawing
© 2024 Signify Holding All rights reserved. Signify does not give any
representation or warranty as to the accuracy or completeness of the
information included herein and shall not be liable for any action in reliance
thereon. The
information presented in this document is not intended as any commercial o‚er
and does not form part of any
quotation or contract, unless otherwise agreed by Signify. Philips and the
Philips Shield Emblem are registered
trademarks of Reckoning Philips N.V.
www.lighting.philips.com
2024, July 23 – data subject to change