nedis CATR2024BK FM Audio Transmitter for Car User Guide
- June 1, 2024
- nedis
Table of Contents
nedis CATR2024BK FM Audio Transmitter for Car
For more information see the extended manual online: ned. is/catr2024bk
Intended use
This product is an FM transmitter that transmits Bluetooth® audio signal over a selected FM frequency that can be received by any FM car radio. The product has a built-in microphone for making hands-free calls and the integrated USB charging port can be used to charge any device. The product is intended for indoor use only. Any modification of the product may have consequences for safety, warranty and proper functioning. The product is not intended for professional use.
Main parts (image A)
- Microphone
- USB charging ports (18 W)
- USB-C charging port
- Call / Play / Pause button
- Channel button
- LED display
- Bass wheel
- Previous button
- Next button
- Treble wheel
- Light
- Auxiliary power plug
Safety instructions
WARNING
- Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
- Only use the product as described in this document.
- Do not let children play with the packaging material. Always keep the packaging material out of the reach of children.
- Do not open the product, there are no user-serviceable parts inside.
- Do not drop the product and avoid bumping.
- Do not immerse the product in water or other liquids.
- Do not expose the product to water, rain, moisture, or high humidity.
- Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
- Be careful when using the product while driving. Always focus your attention on the road.
- Disconnect the product from the power source before cleaning.
- Do not use aggressive chemical cleaning agents when cleaning the product.
Installing the product (image B)
Plug the auxiliary power plug Ae into an auxiliary power outlet.
Connecting the product to FM radio
- Tune your car radio to an unused FM frequency.
- Press the channel button A5.
- Press the previous or next button A89 to match the transmission frequency to the car radio frequency.
Pairing the product to a Bluetooth® device
- Enable Bluetooth® on the device you want to pair the product with.
- Select “CATR2024BK” from the list of available Bluetooth® devices on your device.
- If the product has already been paired with another device, make sure that the device is switched off or Bluetooth® is disabled.
- Using the product
- Press and hold the channel button A5 for 2 seconds to switch the product on or off.
- Charging your device is still possible even if the product is switched off.
- Press the call / play/pause button A4 twice to switch the light Aw on or off.
Controlling the music
- Press the call/play/pause button A4 to play or pause music.
- Press the next button A9 to skip to the next song.
- Press the previous button A8 to go back to the previous song.
- Press and hold the previous button A8 for 2 seconds to increase the volume.
- Press and hold the next button A9 for 2 seconds to decrease the volume.
- Rotate the bass wheel A7 to control the bass.
- Rotate the treble wheel Aq to control the treble.
Activating voice assistant
- Press and hold the call/play/pause button A4 for 2 seconds to activate the voice assistant on your mobile phone (Siri or Google Assistant).
Making phone calls
- When a call comes in while playing music, the product will automatically switch to telephone mode.
- Press the call/play/pause button A4 to answer or end a phone call.
- Press and hold the call/play/pause button A4 for 2 seconds to reject a call.
- During a call, press and hold the call/play/ pause button A4 for 2 seconds to switch the call audio from the car speakers to your mobile device.
- Connect your device with a USB cable (not included) to the USB port A2 or USB-C port A3.
- The product automatically starts charging your device when you switch on the car engine.
Disposal
The product is designated for a separate collection at an appropriate
collection point. Do not dispose of the product with household waste. For more
information, contact the retailer or the local authority responsible for the
waste management. Declaration of Conformity We, Nedis B.V. declare as
manufacturers that the product CATR2024BK from our brand Nedis®, produced in
China, has been tested according to all relevant CE standards and regulations
and that all tests have been passed successfully. This includes, but is not
limited to the RED 2014/53/EU regulation. The complete Declaration of
Conformity (and the safety data sheet if applicable) can be found
anddownloaded via:
nedis.com/CATR2024BK#support.
Nedis BV
De Tweeling 28, 5215 MC ’s-Hertogenbosch
The Netherlands
service@nedis.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>