INCIPIO PW410 10W Wireless Charging LED Magnifying Lamp Instruction Manual
- June 1, 2024
- Incipio
Table of Contents
INCIPIO PW410 10W Wireless Charging LED Magnifying Lamp
PART DISCRIPTION
- Wireless Charging Surface
- On/Off Button
- USB-C Input Port
- LED Lamp Bulb
- LED Indicator
- Magnifying Glass
- Adjustable Neck
Packing List
- (1) Wireless Charging Lamp
- (1) Type-C Cable
- (1) 18W Wall Adapter
- (1) User Manual
Item Specifications
- Model: PW-410-BLK
- Input: DC 12V/1.5A
- LED Output: 6W
- Wireless Output: 5W/7.5W/10W
- Conforms To: UL Std. UL153, UL 2738
- FCC ID: 2BCOY-PW410
- Weight: 1.38 lb; 627 g
- Size: L 7.6 in (19.2 cm); W 5.4 in (13.7 cm); H 12.2 in (31 cm)
Getting Started
Welcome to your new Wireless
- Charging Magnifying Lamp made by onward.
- This lamp has three brightness modes that can be cycled through with a single-touch dimming function.
- To use, first plug the Type-C cable into the lamp, then plug the other cable end into a wall adapter and then into a wall outlet/power source.
- To turn your lamp on, click the ON/OFF button once.
- This brightness level is at 40% of total brightness.
- To modify your lamp’s light or magnification placement, adjust the movable neck until it is in the desired position.
Wireless Charging:
- To ensure proper charging, please place your wireless charging-capable device at the centre of the wireless charging pad. Wait for the green light to indicate that charging has begun.
Wireless Charging LED Indicator:
- Power On: Light will turn from blue to green and then enter standby mode
- Stand-by: The blue indicator light is always on
- Charging: The green indicator light is always on
- Fully-Charged: Green light transfers to standby mode (blue)
- Device Incorrectly Placed/Foreign Object: Flashing
Blue
- Over/Under Voltage: Flashing Blue
- Over Temperature: Flashing Blue
How to Use
How to Use the LED Lamp:
To turn your lamp on, click the ON/OFF button once. This brightness level is
at 40% of total brightness. Short press and hold to cycle through a total of
three (3) brightness selections.
- Level 1: 40%
- Level 2: 70%
- Level 3: 100%
After powering off, the lamp will return to its previous brightness setting the next time it is turned on
Care Instructions
- To clean, use a damp cloth to wipe the body and a magnifying glass
- Keep the device out of and away from excessive heat or cold
Safety Warnings:
- Please be sure to read the manual before using this product.
- Do not disassemble the device.
- Do not place on, near, or into fire or water.
- Please avoid use in severely hot, humid, or corrosive environments.
- Please do not place items with magnetic strips or chips onto the wireless charging pad.
- Keep a distance of at least 20 cm between implantable medical devices and the wireless charger to avoid possible interference.
- This item is not a toy.
- Please note that, if your phone is in vibrate mode and it vibrates, it may move itself off the charging pad, impacting its ability to charge wirelessly.
FCC
FCC Statement:
This equipment has been tested and found to comply with the limits for a Class
B digital device, under Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used by the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Information for users:
This device complies with Part 15 of the FCC rules.
Operation is subjected to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
FCC Radiation Exposure Statement:
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. The equipment should be installed and operated with
a minimum distance of 20cm between the radiator & your body.
Warranty
- Lifetime limited warranty. Please visit the following website for full details:www.onwardbrands.com/support/warranty-policy.
- Manufactured by ONWARD BRANDS LLC
- For customer support, please contact us at:
- ONWARD BRANDS LLC 767 5TH AVE FL 37TH
- NEW YORK, NY 10153
- Couriel: support@onwardbrands.com.
- www.onwardbrands.com.
- 10W Wireless Charging LED Magnifying Lamp
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>