INC-0253-001-002 Incipio Power Bank with Built in Cables User Manual
- June 3, 2024
- Incipio
Table of Contents
INC-0253-001/002
Incipio Power Bank with Built in
Cables User Manual
10,000 mAh Power Bank with
Wireless Charging and Captive Cables
Product outline
Included items:
-10,000 mAh Power Bank with Wireless Charging and Captive Cables
-Charging Cables
-User Manual
HOW TO CHARGE DEVICES
To charge devices: Plug your device’s charging cable into any one of the indicated USB output ports. The power bank will automatically charge your device. The device will auto power enter a sleep mode when no devices are plugged in after 32 seconds. Never worry about forgetting to power that battery. Press the power button to check the remaining battery capacity left. Double click to turn the Output function. To charge devices wirelessly: Wireless charging capable devices need to center their phones over the magnetic wireless charger, the power bank will automatically begin charging your device after 3 seconds.
HOW TO CHARGE THE BATTERY
- Plug in the supplied USB cable to a computer or 5V/2A output device. Power Supply not included.
- Plug in Type-C to input.
- The LED indicators will flash when the device is charging.
- All the indicators will light when the power bank is fully charged.
PRECAUTIONS
- Original USB cable is recommended to charge Micro-USB devices.
- Do not expose product to fire or extremely high temperatures.
- Optimum working temperature for device is lower 60°C
- Do not attempt to disassemble or modify the battery in order to avoid danger. Use the device with caution-avoid dropping or impact.
SPECIFICATIONS
Model: PW-405-WHT / PW-405-NVY
Type-C Input: 5V 2A / 9V 2A /12V 1.5A
Output 1: USB 5V 3A / 9V 2A / 12V 1.5A 5500mAh
Output 2: Type-C 5V 3A / 9V 2.22A / 12V 1.5A 5500mAh
Output 3: Type-C Cable 5V 3A / 9V 2A / 12V 1.5A 5500mAh
Output 4: Micro-USB Cable 5V 2.4A, 5500mAh
Capacity: 10000mAh/3.7V/37Wh
Power Bank capacity: Type-C 5V 6Ah, USB1+USB2 5V 6Ah
Total 1+2+3+4: 20W Max
Output 5: Wireless 10W Max
Dimension: 4.25 x 2.7 x .75 in
Weight: .41 lbs
INDICATOR
LED indicators (ON OFF)
IMPORTANT SAFETY INSTRUCTIONS
WARNINGS: When using this product, basic precautions should always be followed, including the following:
a) Read all the instructions before using the product.
b) To reduce the risk of injury, close supervision is necessary when the
product is used near children.
c) Do not put fingers or hands into the product.
d) Do not expose power bank to rain or snow.
e) Do not use a power bank in excess of its output rating. Overloaded outputs
above rating may result in
a risk of fire or injury to persons.
f) Do not use a power bank that is damaged or modified. Damaged or modified
batteries may exhibit unpredictable behavior resulting in fire, explosion or
risk of injury.
g) Do not disassemble the power bank. Take it to a qualified service person
when service or repair is required. Incorrect reassembly may result in a risk
of fire or injury to persons.
h) Do not expose the power bank to fire or excessive temperature. Exposure to
fire or temperature above 100°C may cause explosion. The temperature of 100°C
can be replaced by the temperature of 212°F
i) Switch the power bank when not in use.
SAVE THESE INSTRUCTIONS
CAUTION: Risk of fire and burns. Do not open, crush, heat above 60°C or
incinerate. Follow manufacturer’s instructions
FCC WARNINGS
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Caution: The user
is cautioned that changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment. Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
NOTES: To avoid printing the same thing twice we can use this for both
Navy and Cream colorways.
Vinci Brands Designs
This document is strictly proprietary and confidential.
All rights reserved. Not to be reproduced or distributed.
© 2022 Vinci Brands LLC.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>