INCIPIO PW409 10W Wireless Charging Organization Hub Instruction Manual
- June 15, 2024
- Incipio
Table of Contents
INCIPIO PW409 10W Wireless Charging Organization Hub
Packing List
- Organization Hub
- Type-C to USB-A Cable
- Adapter
- User Manual
Product Specifications
- Model: PW-409
- Input Voltage/Current: 5V/2.0A, 9V/2.0A
- Output Power: 5W/7.5W/10W
- Product Standard: Qi Standard
- Transmission Distance: <7mm
- Efficiency: > 75%
- Product Size: L 277 mm; W 178 mm; H 99 mm
- L 10.9 in; W 7 in; H 3.9 in
- Weight: 478 g; 1.05 lb
Set Up & Charging
- Plug the power adapter into the socket (1).
- Connect the USB cable (2) to the power adapter.
- Connect the USB cable to the Type-C plug on the back of the Organization Hub (3).
- A blue light will turn on to indicate wireless charging is ready.
- To wirelessly charge your device, place a wireless USE charging compatible device on the charging pad.
- The indicator light will turn from blue to green to indicate charging.
- If the device is removed, the light will return to blue, indicating standby mode.
Note: For fast charging, only QC2.0/QC3.0 standard power adapters will work
Wireless LED Indicators
- LED Blue Light: Standby
- LED Green Light: Charging
- Flashing Blue Light: Either incorrect placement of the mobile device, temperature protection indication, or trigger FOD.
Care Instructions
- When charging, please remove the protective case, except for the receiver case. For best results and highest efficiency, be sure to use a 2A adapter.
- Do not disassemble the charging hub.
- Avoid contact with water or fire to prevent short circuits.
- Avoid the use of a charging hub in extremely hot, humid, or corrosive environments.
- Do not place items with a magnetic strip or chip (ie – an ID card, bank card, credit card, etc) on the wireless charging pad.
- Keep a distance of at least 20 cm between implantable medical devices (ie – pacemakers, cochlear implants, etc) and the wireless charger.
- Keep out of reach of children.
FCC NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
INFORMATION FOR USERS
This device complies with Part 15 of the FCC rules. Operation is subjected to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or
modifications not expressly approved by the party responsible for compliance
could void your authority to operate the equipment.
FCC RADIATION EXPOSURE STATEMENT
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. The equipment should be installed and operated with
a minimum distance of 20cm between the radiator & your body.
Warranty
“Guaranteed for Life” covers the reasonable lifespan of this product
(guaranteed for five years from the date of purchase).
Manufactured by Vinci Brands LLC
For customer support, please contact us at Vinci Brands LLC 1775 Flight Way,
Suite 300, Tustin, CA 92782 USA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>