INCIPIO PW411 10W Wireless Charging Mini Mirror Instruction Manual

INCIPIO PW411 10W Wireless Charging Mini Mirror

Features:

1. LED Lamp
2. Wireless Charger Location
3. LED Light Switch
4. Charging Indicator
5. Heat Dissipation Hole
6. Angle Bracket
7. Micro USB input port
8. Micro USB Connector
9. Micro USB Cable
10. USB Connector

Packing List

(1) Wireless Charging Mirror
(1) Micro-USB to USB-A Cable
(1) Wall Adapter
(1) User Manual
(1) Microfiber Pouch

Product Specifications

• Model: PW-411
• Input: 5.0V/2.0A; 9.0V/1.67A (fast charge)
• Output: 5.0V/1.0A; 9.0V/1.2A (fast charge)
• Dimensions: H 125 mm; W 93 mm; D 33 mm
• Weight: 95 g

Set Up

1. Remove the wireless charging mirror from the box, discard packaging or store inside the box for safekeeping.
2. To set up your wireless charger, connect the Micro-USB cable to the input port of the mirror and the other end to the included Wall Adapter or another USB power source.
3. If connected successfully, the blue LED indicator light will illuminate, indicating your device is charging.

Wireless Charging

1. Place your wireless charging enabled device on the holder stand.
2. When the LED light is green, your device is charging.

LED Ring Light

• The LED has an adjustable 3-stage LED light
• Touch the LED light switch once to turn the LED light on, touch the switch again to select your desired brightness, touch again to turn off.

Care Instructions

1. Clean with a soft cloth and avoid abrasive cleaning agents.
2. Do not expose to liquid, moisture, humidity, extremely high or low temperatures, or sharp objects.
3. Do not drop or attempt to disassemble the wireless charger.
4. Store in a cool, dry, clean space.
5. Keep away from devices with a magnetic strip (ie – ID cards, bank cards, credit cards, etc).
6. Keep at least 20 cm away from medical implants
7. Remove phone cases thicker than 0.5 cm for wireless charging
8. Do not charge phones in a metal case. Remove before charging.

Safety Warnings

1. Please note that this device is not a toy and should be kept out of reach of children.
2. Any repairs should be carried out by a qualified professional.
3. Keep away from heat, direct sunlight, humidity, water, and sharp edges that could case damage to the mirror.
4. Keep the unit free of dust and lint, being sure to not use in water or with wet hands.
5. Avoid exposure to water, moisture, or other liquids to prevent electric shock, damage, or injury.
6. The unit is only designed for its intended use, please do not use for anything other than its intended use.
7. Do not store in direct sunlight or high-humidity; keep objects out of the unit’s openings; avoid short circuiting; do not stack with other electrical devices to avoid overheating.
8. Not for commercial use.

FCC NOTICE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To assure continued operation, follow the attached installation instructions and use only shield cables when connecting to other devices.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC AND IC INFORMATION FOR USERS

This device complies with Part 15 of the FCC rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and (2) this device must accept any interference received,
including interference that may cause undesired operation. The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Warranty

“Guaranteed for Life” covers the reasonable lifespan of this product (guaranteed for five years from date of purchase).
Manufactured by Onward Brands LLC
For customer support, please contact us at: Onward Brands LLC 1775 Flight Way, Suite 300, Tustin, CA 92782 USA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>