LENZ RCB1400 Lithium Pack RCB Batteries Instruction Manual

LENZ RCB1400 Lithium Pack RCB Batteries

Product Information

Specifications:

• Product Name: Heated Sock
• Recommended Age: Not suitable for children under the age of 36 months
• Usage: For individuals with certain conditions like circulatory disorders and neurological conditions

Product Usage Instructions

General Safety Precautions:

• Keep these important instructions for future reference.
• Read all safety precautions and operating instructions carefully.
• Failure to follow the safety precautions may result in electric shock, fire, and/or serious injuries.
• Not recommended for individuals with restricted physical, sensory, or mental capabilities unless supervised.
• Not suitable for children under 36 months of age.
• Consult a doctor if you have specific conditions or take medications regularly before using the product.

Usage Instructions:

1. Check the product for any damage to the cables or other parts before use. Do not use if damaged.
2. Ensure the heated sock is not used by individuals with specific illnesses or conditions listed in the manual.
3. Supervise children to prevent misuse of the product.
4. Regularly check your feet for skin redness while using the heated sock.
5. Avoid prolonged exposure to excessive heat levels to prevent burns.
6. If using in tight footwear, ensure the sock is not wrinkled near the heating element to avoid discomfort.

FAQ

• Q: Can the heated sock be used by individuals with diabetes?
  A: The product is not recommended for individuals with diabetes or certain circulatory disorders. Consult a doctor before use if you have diabetes.

• Q: Is the product safe for children under 3 years old?
  A: The product is not suitable for children under the age of 36 months. Children should be supervised while using the heated sock.

• Q: How often should I check my feet while using the heated sock?
  A: It is recommended to regularly check your feet for any signs of skin redness or discomfort while using the product to prevent burns or injuries.

SAFETY PRECAUTIONS

General safety precautions:

• Keep these important instructions for future reference

• WARNING: Please read all safety pre-cautions and operating instructions carefully. (b) Failure to follow the safety precautions and operating instructions may result in electric shock, fire and/or serious injuries.

• This product is expressly not recommended for use by persons (including children) with restricted physical, sensory or mental capa-bilities or without experience and relevant knowledge, unless they are supervised by a person responsible for their safety or have been trained in how to use the product. Children should be supervised to ensure that they do not use the product as a toy or operate it on their own.

• Not suitable for children under the age of 36 months. (a)

• This product is not recommended for people with the following illnesses, but the list is not exhaustive:

• somatosensory disorders and/or neuro-logical conditions that cause a soma-tosensory disorder of the extremities, including diabetes, diabetic neuropathy, peripheral neuropathies, traumatic brain injury, stroke, spinal cord injury, multiple sclerosis and other

• circulatory disorders, including peripheral arterial occlusive disease, thrombosis, moderate to severe varicose veins, lymphoedema and leg swelling due to other causes

• unhealed injury of the extremities resulting in open skin wounds, ulcers, bruises or inner injuries

• burns of the extremities

• active infections of the extremities

• skin diseases resulting in sensitive, dry or cracked skin, such as eczema and other forms of dermatitis, all diseases connected with skin infections and/or inflammations, physical urticaria and other

• vasospastic phenomena including, but not limited to Raynaud’s syndrome

• If you suffer from one of the above-men-tioned diseases or another that was not mentioned and take medications either currently or regularly and/or are unable to sense heat or cold properly (e.g. people with special needs, etc.), consult your doctor prior to using the product!

• Check your feet regularly for redness of the skin. Excessive heat levels over prolonged periods of time can lead to burns.

• If the heated sock is used in firmly closed or specially fitted footwear with a very narrow shape, please make sure that the sock is not wrinkled in the area of the heating element. This could result in painful pressure points.

• Never use the heated sock in combination with other heated products (heated insole, heated boot, etc.); there is a risk of exces-sive heat.

• The heat should be switched off when ent-ering an environment with a considerably higher temperature.

• Do not use the product for warming animals.

• Check the product regularly for signs of wear or damage. If you notice any of these signs, if the product was used improperly or if the product does not work, bring it back to the dealer before using it again.

• The battery packs must only be used with compatible LENZ products!

• Discharge the battery packs and recharge them half way at least every 6 months!

• Only use the Charge Box (LZ-CBX-010) included in delivery for charging. It is designed for indoor use and must not be exposed to moisture.

• The battery packs must not be charged or stored outside the permitted ambient tem-perature of +10°C to +30°C.

• The battery packs must not be discharged outside the permitted ambient temperature of -20°C to +30°C.

• Always store the battery packs with the contact protector attached.

• When the battery packs are not in use, keep them away from other metal objects such as paper clips, coins, keys, nails, screws and other small metal objects which could form a connection between the contacts. Short-circuiting the con-
  nections may cause burns or fire.

• Do not charge or store the battery packs near flammable substances!

• Never try to open the battery packs! Improper handling of the lithium-ion batteries can lead to an explosion!

• Damaged battery packs must no longer be used and must be disposed of immediately.

• Do not expose the battery packs to fire or excessive temperatures. Exposing the battery packs to fire or temperatures above 130°C may lead to an explosion.

• Do not puncture with a needle or similar! (c)

• The product is not intended for use in hospitals.

• The technology employed meets all relevant and legal requirements. The usability of Lenz products in the proximity of other sensitive electronic products (e.g. avalanche beacons, cardiac pacemakers, etc.) must be checked with their manufacturers.

• Avoid kinking the product by placing other objects on top of it during storage.

• The battery packs must not be used in or underwater!

• If used improperly, liquid may leak out of the battery; avoid contact. In the event of accidental contact, rinse with water. In the event of contact with eyes, also seek medical assistance. Liquid leaking out of the battery may cause irritation or burns.

• Do not used batteries or products if they have been damaged or modified. Damaged or modified batteries can behave unpredictably, which may lead to fires breaking out or a risk of injury.

• Only use qualified repair personnel for maintenance, and only use identical spare parts. This will ensure the product is safe to use.

• Do not attempt to modify or repair the product or the battery (if applicable) in ways other than those specified in the operating and care instructions.

INTRODUCTION

Congratulations on your purchase of the lithium pack rcB 1400 / lithium pack rcB 2000. Please carefully read the operating instructions before using the product.
The operating instructions are also available in electronic form on the manufacturer’s website at: www.lenzproducts.com.

PACKAGE CONTENTS

• 2 lithium packs, rcB 1400 or lithium packs rcB 2000 (battery pack)
• 2 contact protectors
• 1 Charge Box (including USB cable)

PRODUCT DESCRIPTION

lithium pack rcB 1400 / lithium pack rcB 2000

• Snap fasteners for connecting to the heatable textile (Fig. 1.1)
• Heat setting display and charge indicator 1 / 2 / 3 (Fig. 1.2)
• Control button (Fig. 1.3)
• Contact protector (Fig. 1.4)

Charging accessories

• USB cable (Fig. 2.1)
• Charge Box (Fig. 2.2)

TECHNICAL SPECIFICATIONS

FIRST USE AND CHARGING

Important note: The battery packs must be charged before using them for the first time.

Charging procedure

1. 1. Connect the USB cable (Fig. 2.1) to the Charge Box (Fig. 2.2) and a USB power supply unit (5 V, 2 A, not included in delivery) and plug the USB power supply unit into a socket.
   2. Place both battery packs into the Charge Box (Fig. 2.2). Please check the illustration on the Charge Box to ensure proper orientation. The battery packs can be charged in any operating mode.
   3. The charging process starts automatically.
   4. The charge indicator (Fig. 1.2) shows the progress of the charging process as it slowly rises.
   5. The charging status can be monitored by looking at the LEDs on the battery pack, which will light up in ascending order as the charge increases. It can also be optionally monitored with the Lenz heat app* convenient control app.
   6. Once the battery packs are fully charged, the charging process ends automatically and the charge indicator LEDs (Fig. 1.2) are switched off.

2. 7. After the end of the charging process, please remove both battery packs from the Charge Box. (Fig. 2.2)

Fast-charge mode

1. 1. If the control button (Fig. 1.3.) is pressed once briefly during the charging process, the battery packs switch to the fast-charge mode.
   2. The charge indicator (Fig. 1.2) shows the increasing progress of the fast- charge mode.
   3. Once the battery packs are fully charged, the charging process ends automatically and the charge indicator LEDs (Fig. 1.2) are switched off.
   4. The charging status can be monitored by looking at the LEDs on the battery pack, which will light up in ascending order as the charge increases. It can also be optionally monitored with the Lenz heat app* convenient control app.
   5. After the end of the charging process, please remove both battery packs from the Charge Box. (Fig. 2.2)

Important note:

• If an attempt is made to charge the battery packs outside of the specified ambient temperature range (see safety precautions), the charging process will be prevented automatically and this will be indicated by the lower LED on the battery packs blinking. Disconnect the battery packs from the Charge Box and restart the charging process at room temperature.
• Because naturally occurring minimal differences due to production can occur, the charge indicator in the Lenz heat app* only serves as a general indicator.
• Charge the product after every use. This helps extend the life of the battery packs and ensures that the product is ready for use at any time.
• The battery consists of lithium ion cells and can be charged in any state. For this reason, the battery does not need to be fully discharged before charging.

SAFETY FUNCTIONS

• Short circuit protection: In the event of a short circuit at the contact or the heating element, the integrated electronics automatically turn the product off. After eliminating the short circuit, please briefly connect the battery packs to the Charge Box. Next, press the control button once and the product is ready again.
• Protection against overcharging and exhaustive discharge: The product is protected against overcharging and exhaustive discharge with the integrated electronics system.

HOW TO USE THE BATTERY PACKS

Use with Lenz heat products

• Remove the contact protector from the battery packs (Fig. 1.4).
• Place the battery packs in the intended position (see figure A, B, C, D, E).
• Push the battery packs onto the snap fasteners until they audibly lock into place (Fig. F).
• The battery packs can be operated conveniently and manually, either through the visual control window or the textile (Fig. G), or optionally via the Lenz heat app on a smartphone.

IMPORTANT INSTRUCTIONS FOR USE

• When using the heated product, the optimal heating power is only produced when all heated products, textiles and socks you are wearing are dry.
• Do not operate the device at the highest heating power for longer than several minutes.
• Always set the product to a low or medium heat level to maintain a comfortably warm temperature (the heating should be nearly unnoticeable).

FUNCTIONAL DESCRIPTION

lithium pack rcB 1400 / lithium pack rcB 2000

• Manual operation: The battery packs have three heat settings. They are indicated by the heat setting display (Fig. 1.2) on the battery packs.
• Remote control: When using remote control via the APP, the heat output can be set to one of 9 levels via the corresponding controls in the APP.

USE AND FUNCTION

• Turning on:
  Turn on the product on the lowest heat setting by briefly pushing (approximately 0.5 seconds) the control button on the battery pack (Fig. 1.3).

• Setting the heat level:
  This can be done by repeatedly pressing the control button on the battery pack (Fig. 1.3), or using the corresponding control in the APP when using remote control. The respective heat level is indicated by the illumination of the heat setting display (Fig. 1.2) on the battery pack, or in the APP when using remote control.

• Turning off:
  Pressing the control button again turns the battery pack off.

• Note:
  The app must be closed to be able to switch off the battery pack. The battery pack can still be turned on for 24 hours via the APP, but after that, only by pressing the button.

APP CONTROL

The lithium packs rcB 1400 / lithium packs rcB 2000 can be controlled via the Lenz heat app* for smartphones. The battery packs must be in “Pairing Mode” to be able to couple them properly with the smartphone.

Pairing mode
Please switch the desired battery packs to “Pairing Mode”. To do so, press the control button (Fig. 1.3.) for approx. 10 seconds until the heat setting displays (Fig. 1.2.) are blinking and then immediately release the control button. The LED in the middle is illuminated steadily.
Note: The Pairing Mode remains active for 2 minutes! If no pairing takes place during this time, this mode will end automatically!
**The optional Lenz heat app for convenient control is available for download via the Android Play Store and the Apple Store.

HEAT SETTING – HEATING PERIOD

• For heating power and heating period data, please see the table on the product packaging. You can also access the data online at www.lenzproducts.com.
• The heating period per charge depends on the selected heat setting, the ambient temperature, the battery packs, and the charge state as well as the age of the battery packs

SERVICE, STORAGE AND CARE

Storage mode
The storage mode half charges the battery packs and then puts them to sleep, so your battery packs can be stored in perfect condition.

1. The battery packs must be discharged to start the storage mode. If needed, discharge the battery packs using your heating product.
2. Start the charging process as usual (see Charging process)
3. To start the storage mode, press and hold the control button (Fig. 1.3.) for 3 seconds. All three LEDs of the charge indicator will blink three times.
4. The first two LEDs of the charge indicator (Fig. 1.2) show the increasing progress of the charging process.
5. Once the battery packs are half charged, the charging process ends automatically and the charge indicator LEDs (Fig. 1.2) are switched off.
6. After the storage mode has finished, store the battery packs as described in “Storage”.

Important note:

• If the battery packs are more than half charged, the storage mode will automatically be prevented, and this will be indicated by the middle LED on the battery packs blinking. Disconnect the battery packs from the Charge Box and connect them to your heating product to discharge them. Afterwards, restart the charging process and the storage mode.

• Storage
  To ensure long battery life, we recommend storing the battery packs in a cool room (see safety instructions) in a half-charged state. The battery packs must be turned off (heat setting display (Fig. 1.2) dark) and disconnected from the heatable textile for storage. They can remain in the Charge Box for storage, but to do this, disconnect the USB power supply unit from the Charge Box.
  For long-term storage, the battery packs must be discharged and recharged halfway at least every 6 months. This ensures that maximum performance is preserved for many years!
  Caution: Always store the battery packs with the contact protector attached!

• Cleaning
  Clean the parts as needed with a soft, slightly damp cloth and a mild detergent.
  Caution: Always disconnect the USB power supply unit from the socket before cleaning.

DISPOSAL

• Once the product has served its purpose, please dispose of it and its packaging appropriately and in an environmentally friendly manner.
• Please do not dispose of the charger together with the house- hold waste. Instead, bring the parts to a collection site for electronic waste. (d)
• Take the battery packs to the intended collection sites for used batteries. (e)
• Packaging materials are raw materials and can be recycled. For this reason, please recycle the packaging.
• Please contact your local authority for more information.

References

• Lenz Products | beheizte Kleidung und Funktionsbekleidung

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>