Airplove CF-8126AS Air Purifier Instructions

USE & CARE INSTRUCTIONS

Air Purifier CF-8126AS

READ AND SAVE THESE INSTRUCTIONS
WARNINGS
Failure to comply with the warnings listed below may result in electric shock or serious injury.

This product should be used only in accordance with the specifications outlined in this manual. Usage other than what has been specified here may result in serious injury.
When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:

• Read all instructions before using appliance.
• IMPORTANT – This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet  only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
• To avoid fie or shock hazard, plug the appliance directly into a right AC electrical outlet.
• Keep the cord out of heavy traffic areas. To avoid fie hazard, NEVER put the cord under rugs, near heat registers, radiator, stoves or heaters.
• To protect against electrical hazards, DO NOT immerse in water or other liquids. Do not use near water.
• Children cannot recognize the hazards associated with the usage of electrical appliances. For this reason, always supervise children when they are near the unit.
• Always unplug the air purifier before moving it, opening the grill, changing filters, cleaning or whenever the air purifier is not in use. Be sure to pull by the plug and not the cord.
• NEVER drop or insert any object into any openings.
• DO NOT run cord under carpeting.
• DO NOT cover cord with throw rugs, runners, or similar coverings.
• DO NOT route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.
• DO NOT operate any appliance with a damaged cord or plug, if motor fan fails to rotate, after the appliance malfunctions, or if it has been dropped or damaged in any manner. Send to Customer Service for assistance.
• Use appliance only for intended household use as described in this manual. Any other use not recommended by the manufacturer may cause fie, electric shock or injury to  persons.
• DO NOT use outdoors.
• DO NOT place anything on top of unit.
• NEVER block the air openings, grills/outlets or place on a soft surface such as a bed or sofa, as this could cause the unit to tip over, blocking the air intake or outtake opening.
• DO NOT attempt to repair or adjust any electrical or mechanical functions on this unit. Doing so will void your warranty. The inside of the unit contains no user serviceable parts. All servicing should be performed by qualified personnel only.
• WARNING: To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.

Correct Disposal of this product
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human  health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and  collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

PRODUCT STRUCTURE

Touch panel
Pre-filter
HEPA filter
Activated carbon filter

AIR CLEANING SYSTEM

Improve your indoor air quality with your new Air Cleaning System. Multiple levels of cleaning include a combination of Pre-filter that traps big particals, HEPA filter that  captures micro particles UV-C light technology enhances germ-killing.
PRE-FILTER: Captures initial dust and allergen particles.
HEPA FILTER: Captures dust, smoke, pollen  and other allergens;
Activated Carbon Filter : Removes odors and bad smells.

OPERATING INSTRUCTIONS

BEFORE OPERATING THE AIR PURIFIER:

1. Carefully remove your air purifier from box and plastic bag.
2. Select a firm, level and flat location for the air purifier.
   For proper air flow, locate the unit at least 1 foot from any wall or furniture.
   Make sure none of the grills are blocked.
3. Plug the power cord into a right voltage AC outlet.
   IMPORTANT: When moving the air purifier, always lift unit firmly by your hands.

OPERATING THE AIR PURIFIER

1. POWER/FILTER RESET
   Soft press to turn on/ off the unit.
   Note: Press and hold POWER Button for 5 seconds to reset Filter Replace Indicator.

2. “TIMER” BUTTON:
   By pressing this button, the purifier can be timed to operate for intervals of 2, 4 and 8 hours, stopping automatically when the selected operating time has elapsed.

3. “AUTO/SLEEP” BUTTON:
   Under AUTO mode, the unit will automatically change the speed according to the air quality level.
   Under SLEEP mode, all the lights will turn off and unit working in speed 1.

4. “SPEED” BUTTON:
   There are 4 speed setting.
   Press the button each time to select L(I),M(II),H(III) and Turbo speed.
   Speed I is sleep mode, select this speed and in 10s, all LED will be turned off.

5. “UV/ION/WIFI” BUTTON:
   Press this button to turn on/off the UV and Ionizer function.
   Note: Press the hold this button for 5 seconds to active the WIFI connection.

INSTALLING & REMOVING FILTERS

FILTER REPLACE INDICATOR
The FILTER RESET led light on indicates that it is time to replace the filter. Follow the instruction below to change filter and reset the program.
*Combination Filter will last approximately 6 months.

1. Find the lock on the base of the unit.
2. Unock it by moving it to left.
3. Lift up the unit.
4. Get the dirty filter out and put a new one into.
5. Set back the unit and move the lock to right.
6. Press Power button for 3-5 seconds to reset the firmware.

CLEANING & MAINTAINING 

The machine should be cleaned at least once every month by a clean, dry, soft cloth.
More frequent cleaning may be required depending on environmental conditions.
NOTE:
Do NOT stick any foreign objects or your fingers inside of the unit.
Do NOT use gasoline, benzine, thinner, harsh cleaners, etc. on and/or in the unit while cleaning as they will damage the product.
NEVER use alcohol or other solvents.

FILTER
FILTER should be cleaned once each month by vacuum cleaner.
Note: Filters should be replaced at least once each 6 months. More frequent cleaning and replacing may be required depending on environmental conditions.
Warranty: 1 year from the date of purchase
FOR ANY WARRANTY CLAIMS, PLEASE RETURN YOUR UNIT OR SEND IT WITH FREIGHT PREPAID TO YOUR DEALER, TOGETHER WITH YOUR
PROOF OF PURCHASE.

FCC warning:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device  must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide  reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and  used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in  conjunction with any other antenna or transmitter, End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Canada warning:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not ca use interference,  and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in  conjunction with any other antenna or transmitter, End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>