Lenz LZE500 Mobile DVR Security Bus Camera System User Manual
- June 6, 2024
- Lenz
Table of Contents
LZE500 Mobile DVR Security Bus
Camera
System User Manual
www.xmlenz.com
Xiamen Lenz Communication Co.,Ltd
Warning
- This equipment complies with CE radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body.
- Restrictions in the 5 GHz band
According to Article 10 (10) of Directive 2014/53/EU, the packaging shows that this radio equipment will be subject to some restrictions when placed on the market in Belgium (BE), Bulgaria (BG), the Czech Republic (CZ), Denmark (DK), Germany (DE), Estonia (EE), Ireland (IE), Greece (EL), Spain (ES), France (FR), Croatia (HR), Italy (IT), Cyprus (CY), Latvia (LV), Lithuania (LT), Luxembourg (LU), Hungary (HU), Malta (MT), Netherlands (NL), Austria (AT), Poland (PL), Portugal (PT), Romania (RO), Slovenia (SI), Slovakia (SK), Finland (FI), Sweden (SE), the United Kingdom (UK), Turkey (TR), Norway (NO), Switzerland (CH), Iceland (IS), and Liechtenstein (LI).
The WLAN function for this device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range.
DECLARATION OF CONFORMITY
Applier certifies that the following designated product
Product Name: Mobile DVR
Model No.: LZE500
Is in conformity with the standard(s)
EN60950-1：2006+A11:2009+A1:2010+A12:2011+A2:2013
EN62311:2008
Draft ETSI EN301489-1 V2.2.1
Draft ETSI EN 301 489-17 V3.2.0
Draft ETSI EN301489-19 V2.1.0
Draft ETSI EN301489-52 V1.1.0
EN303 413 V1.1.1
EN301908-1 V11.1.1
EN301908-13 V11.1.2
EN300 328V2.1.1
EN301 893V2.1.1
EN300 440V2.1.1
Complies with the essential protection requirements of Directives on Radio Equipment Directive 2014/53/EU.
The designated product was subject to sample testing for which CCIC Southern
Electronic Product Testing (Shenzhen) Co., Ltd.
issued test report number:
SET2019-05455; SET2019-05183; SET2019-05184;SET2019-05226;
SET2019-05445;SET2019-05446;SET2019-05447;SET2019-05478
The declaration is the sole responsibility of the applier.
Xiamen LENZ Communication Co., Ltd
20F, Block A04, NO.365 Chengyi Street, Software Park 3, Xiamen, China
Date: 2019-05-17
Signature & Company stamp: LV HEPING
The device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range.
| AT| BE| BG| HR| CY| CZ| DK
---|---|---|---|---|---|---|---
EE| Fl| FR| DE| EL| HU| IE
IT| LV| LT| LU| MT| NL| PL
PT| RO| SK| SI| ES| SE| UK
Chapter 1 Product Introduction
About E500
LZE500 Mobile DVR is a compact, full-featured recording system that uses an SD
card, hard disk (HDD), and solid-state disk (SSD) as the storage device. It
provides H.264 high-quality and max 8 channels of 720P/1080P AHD recording,
and 8 channels of 720P/1080P high definition video surveillance and fleet
management for police cars, ambulances, fire engines, public buses, tourist
buses, etc.
The industrial-quality and fanless design of LZE500 enable the easy
dissipation of heat. It could endure the voltage surge in vehicles due to the
advanced power module design and strict quality testing, which is an ideal
solution for vehicle surveillance.
Features
- 8 channels 720P/1080P AHD +2 channels 1080P IPC video recording
- Or 8 channels 1080P IPC video recording if connect with PON switch (for option)
- Dual-stream technology adopted
- AVL (automatic vehicle location) tracking by GPS and real-time dispatching
- Support automatic bus stop announcement (for option)
- Support to talk with control center through TTS speaker and microphone
- Receive or send the message and display it on the driver monitor
- OSD: overlay date, time, speed..on the footage
- Alarms: over-speed alarm, a panic alarm, door open/close alarm, route deviation alarm, etc.
- Patented vibration reduction technology
- Configurable working parameters and firmware remotely or locally
- The software is upgradable without replacing a new device.
Size
188mm（L）188mm（W）112mm（H） 
Front Panel
4USB5debug6IC Card7SIM8SD9Hard disk Box10Hard disk lock11RS232
| 1 | LCD | LCD | For Display |
|---|---|---|---|
| 2 | Button | Button | “MANU”, “▲”, “▼”, “OK” |
| 3 | WORK | Red LED | Indicates the device power-on and wireless network |
connection status;
Fast flash: device registration network
Slow flash: The device is registered on the network.
GPS| Green LED| Indicating GPS/BDS positioning signal receiving status;
Fast flash: device is not positioned
Slow flash: The device is positioned
HDD1| Green LED| HDD1 indicator (located on the upper layer of the hard disk
box);
Light off: no storage medium recognized
Light on: recognize storage medium
Flashing: indicates that the storage medium is in the read/write state.
HDD2| Green LED| HDD2 indicator (located on the down layer of the hard disk
box);
Light off: no storage medium recognized
Light on: recognize storage medium
Flashing: indicates that the storage medium is in the read/write state.
MIRROR| Green LED| Black box light;
Light off: no device is recognized
Light on: recognize the device
Flashing: indicates that the device is at work
SD| Green LED| Light off: no storage medium recognized
Light on: recognize storage medium
Flashing: indicates that the storage medium is in the read/write state.
IPC1| Green LED| IPC1 indicator;
Light off: IPC is not connected Light on: IPC Ethernet is connected
| | | Flashing: IPC Ethernet has data transmission and reception
IPC2| Green LED| IPC2 indicator;
Light off: IPC is not connected
Light on: IPC Ethernet is connected
Flashing: IPC Ethernet has data transmission and reception
4| USB| USB Interface| Local upgrade
5| debug| Debugging| CPU serial port print information Can be used for upgrade
6| IC Card| Contact IC card| Driver identification card
7| SIM| With drawer type
cardholder| Install SIM card for remote video and voice calls
8| SD| Self-elastic SD card
holder| For SD card auxiliary recording
9| Hard disk Box| Hard disk Box| Dual hard drive, pluggable
10| Hard disk lock| | From open to closed, the hard disk box and the lower
cover can be locked at the same time.
11| RS232| DB9| External serial printer
Back Panel
| No | Item | Interface | Function |
|---|---|---|---|
| 1 | 4G | SMA | 4G Communication |
| 2 | 3G | SMA | 3G Communication |
| 3 | GPS | SMA | GPS/BD Positioning |
| 4 | POWER | M16 5P | Power Input |
| 5 | MIRROR | M12 5P | Black Box |
| 6 | PANEL | M16 10P | Driver console power support and communicating, Speaker |
access, microphone access, CVBS video output
7| IPC1-2| 12 PIN interface| 2 channels IPC access
8| AHD1-8| 32 PIN interface| 8-channel AHD camera access
9| RS232| 6 PIN interface| Serious port
10| EXT.IO| 30 PIN interface| RS232 interface, RS485 interface, CAN Bus
interface, High and low-level detection, speed detection etc
11| SPEAKER| 4PIN interface| Audio out
Specifications
| ITEM| TECHNICAL SPECIFICATION
---|---|---
SYSTEM| CPU Processor
Operation System| ARM 9, 32 bit high performance CPU
Linux
NETWORK| Wan| 4G LTE
Wi-Fi| NC
GPS
TRACKING| Cold Start
Hot Start
Recapture
Velocity Precision
Positioning Accuracy
Tracking Sensitivity| <35 s
<2 s
<2 s
≤1.0 m/s
≤5M
Capture -144dBm, tracking -159dBm
VIDEO| Video Input
Image Resolution
IPC Solution (For Option)
Image Resolution
Video Output
Video Format
Video Compression
Frame Rate| 8 channels AHD+ 2 channels IPC
CIF/D1/720P/1080P
8 channels IPC (powered by PON)
CIF/D1/720P/1080P
1 channel, CVBS
ISO14496-10, PAL
H.264 main profile
1-25 fps
AUDIO| Audio Input
Audio Output
Audio Compression| 10 channels
1 channel for speaker, 2 channels for PA
8ch ADPCM for AHD, 2 ch G711 for IPC
STORAGE| HDD
SD Card
Black Box| Max 21TB 2.5’ SATA HDD/SSD
Max 1256G SD card
Max 1 64G for disaster backup
I/O| Sensors
Com Port
Can-Bus Network
USB| 7-CH DI, 2-CH DO
3-CH RS232, 2-CH RS485
1-CH CAN-bus, another 1CH for option1-CH RJ45 Ethernet converter interface
1-CH USB, type A
POWER SUPPLY| Input Power
Power Output-1
Power Output-2
Power Output-3
Power Consumptions| DC 9V ~ 36V, typical 12V/24V
+5V@2A
8CH +12V@500mA (analog cameras)
2CH +12V@500mA (IP cameras)
<25W (not connect with accessories and HDD/SSD)
OTHERS| Operating Temperature
Size
Weight
Certification| 20ºC~+70ºC
188mm(L) 188mm(W)*112mm(H)
2.4kg
CE, RoHS, CCC C19
Chapter 2 Installation
Installation
The E500 is not allowed to be placed on the side. It should be laid flat. It
is better to have some elevated positions to prevent water from entering the
car. The equipment is best installed on an outer protective box, which is
sealed around the protective box to prevent people from modifying the
equipment, neat the wire harness and waterproof when cleaning. The
installation diagram is as follows:
Hard Disk Box Installation
- Please use a 2.5-inch hard drive and purchase it from a regular store to ensure the quality of the hard drive.
- After the hard disk is installed, you need to format it before you can record it, otherwise the system will judge the hard disk error.
| 
---|---
1, Prepare the tools and materials needed for installation:
hard drive base, 2.5-inch hard disk, anti-static gloves,
hard drive lock key, screwdriver, 8 M3x5 screws, 4 M3x6 screws| 2, As shown in
the figure, open the hard disk lock with the key, unscrew the fixing screw of
the hard disk box, and pull out the hard disk.
| 
3, As shown in the figure, unscrew the two fixing screws with a screwdriver to
disassemble the entire hard disk box.| 4, The above picture shows the status
of the hard disk box after disassembly.
| 
5. As shown in the figure, the PCB of the first hard disk is facing up,
fastened to the base of the hard disk, and locked with four M3x5 screws.| 6.
Turn the hard disk base 180 and lock the second hard disk with 4 M3x5 screws.
(If only one hard disk is installed, this step can be omitted)
| 
7, Fasten the fixed hard disk drive to the hard| 8, Hold the hard disk box
with your hand and disk box lock the hard disk base to the hard disk box from
the side with 4 M3*6 screws.
| 
9, Connect the SATA interface of the hard disk| 10, The effect after
installation is as shown in to the SATA of the hard disk box. in the figure
above.
| 
11, As shown in the figure, put on the hard| 12. After fixing the hard disk
cover, fix it with disk cover screws
| 
13. The figure above shows the effect of the installed hard disk box. Note:
The HDD keyhole should be close to the front panel of the hard disk box.| 14,
Insert the assembled hard disk box into the device, tighten the fixing screws,
and lock the hard disk lock. Note: If the hard disk box cannot be inserted,
the hard disk box is reversed. Please adjust the front and back sides before
inserting to prevent damage to the hard disk.
Wiring Diagram
**Interface
**
4G Antenna
The interface standard of the antenna port is SMA male External Antenna
Antenna gain: 3.5 dBi
GPS Antenna
The GPS antenna adopts the standard SMA interface. The curved side of the GPS
antenna is facing upwards, and the flat side is facing downward. The fixed
position must make the arc of the antenna face the sky, and there should be no
obstruction on the upper side. The metal-covered explosion-proof membrane will
affect the reception of the satellite signal and the explosion-proof membrane
at this position should be avoided or dug; External Antenna Antenna gain: 3.5
dBi
Power
The following picture shows the 5-pin power cable, 5-pin connector to connect
the device power interface, bare wire part: the red wire is connected to the
positive pole, the black wire is grounded, and the yellow wire is connected
to the ACC (required) 
10-PIN Console
Can transfer speakers, microphone, Driver console;
30-PIN I/O Cable
SIM Card Installation
To purchase a SIM/UIM card from a telecom carrier, the card must be opened for
data services; if voice calls are required, voice services must be activated.
Remove the SIM card slot and insert the SIM/UIM card as shown below.
Note that the side of the chip is facing down.
| 
---|---
| 
Definition of PINs
| Pins on the device | Definition | Remark |
|---|
| 1. Power +
2. Power +
3. ACC
4. GND
5. GND| Connect
power input,
ACC signal
input
| 1. DC 5V
2. USB3.
USB+
4. GND
5. MIRROR access detection|
| 1. DC 5V
2.RS232_RXD2
3.RS232_TXD2
4. MICP
5. MICN
6. speakers
7. SpeakerN
8. GND
9. Video OUT
10. GND| Connect the
Driver
console,
speaker,
microphone,
| 1. IPC2_TX+
2. IPC2_RX+
3. GND
4. 12V IPC1
5. IPC1_RX6.
IPC1_TX-| 7. IPC2_TX8.
IPC2_RX9.
12V IPC2
10. GND
11. IPC1_RX+
12. IPC1_TX+
| |
| 1.12V camera8 power
2.Camera8
3.12V camera7 power
4.Camera7
5.12Vcamera 6 power
6. Camera 6
7.12Vcamera 5 power
8. Camera 5
9.12Vcamera 4 power
10. Camera 4
11.12Vcamera 3 power
12. Camera 3
13.12Vcamera 2 power
14. Camera 2
15.12Vcamera 1 power
16. Camera 117.GND
18. Audio 8
19. GND
20. Audio 7
21. GND
22. Audio 6
23. GND
24. Audio 5
25. GND
26. Audio 4
27. GND
28. Audio 3
29. GND
30. Audio 2
31. GND
32. Audio 1| 8-channel
analog
camera
| 1. Reserved
2. Reserved
3. GND
4.232_TX
5.232_RX
6. GND| RS232
| 1. Debug_TX
2. GND
3. RS232-2-TX
4. A RS485+
5. B RS485+
6. GPS-TX
7. Door sensor
8. CANH1
9. CANH2
10. Brake
11. Right turn
12. Low beam
13. Panic button
14. Oil circuit control
15. GND16. Debug_RX
17. GND
18. RS232-2-RX
19. A RS48520.
B RS48521.
GND
22. Horn
23. CANL1
24. CANL2
25. Left turn
26. High beam
27. Low-level sensor
28. SPEED+
29. DC5V
30. GND|
| 1. External speaker
2. Inner speaker
3. External speaker GND
4. Inner speaker GND|
FCC Caution.
(1)§ 15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
§ 15.21 Changes or modification warning
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
- RF warning for Mobile devices:
- This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
- This equipment should be installed and operated with a minimum distance of 30cm between the radiator &your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>