Smartelds ELD App User Manual

Smartelds ELD App User Manual

Driver Login

Step 1 : Open the Smartelds application.
Step 2 : Enter the Username and Password.
Step 3 : Press the Login button.

Connecting ELD with Vehicle

Step 1 : Locate the diagnostic port.
Step 2 : Attach the wire to the diagnostic port.
Step 3 : Attach other side of the wire to the device.

Selecting Vehicle and Trailer

Step 1 : Press Vehicle icon next to your name.
Step 2 : Press vehicle Name and select Vehicle.
Step 3 : Press Trailer Name and select Trailer.
Step 4: Press the Save button

Connecting ELD with Smartelds App

Step 1 : Press Connect (Red) button on top right.
Step 2 : Press scan button if no device found.
Step 3 : Select the available device.
Step 4: ELD will connect with Smartelds App.

How to change duty status

Step 1 : Press the remai ning time.
Step 2: Select your current duty status.
Step 3: Location & odometer will be auto picked.
Step 4 : Press the save button.

Using personal use and yard move

Step 1 : Press the remaining time.
Step 2 : Select the checkbox below duty status.
Step 3 : Enter the note.
Step 4 : Press the save button.

How to perform DVIR

Step 1 : Press the DVIR button at the bottom.
Step 2 : Select the form and press on inspect.
Step 3 : Select all checkboxes and then finish.
Step 4 : Select vehicle condition.
Step 5 : Add signature and finish DVIR

How to view Logs

Step 1 : Press the logs button at the bottom.
Step 2 : Current day logs will show there.
Step 3 : Select the date to view previous logs.
Step 4 : Press Show all to view all log

How to certify logs

Step 1 : Press the logs button at the bottom.
Step 2 : Select logs of previous days.
Step 3: Press certify button on top right corner.
Step 4: Verify your info & press ‘I agree’ to certify.

How to Login Co-driver

Step 1 : Open the left side menu
Step 2 : Press Co-driver Login.
Step 3 : Enter username and password.
Step 4: Press the Login button.

How to switch between Co-drivers

Step 1 : Open the left side menu.
Step 2 : Press switch co-driver.
Step 3 : Press view or make driver.
Step 4 : Enter the password and login

Roadside Inspection

Step 1 : Open the left side menu.
Step 2 : Press roadside inspection.
Step 3 : Press Start Review.
Step 4 : Handover the device to the Inspector.

Data Transfer

Step 1 : Open the left side menu.
Step 2 : Press roadside inspection.
Step 3 : Press Email or Data Transfer.
Step 4 : Enter the comment and press transfer.

How to Accept/ Reject edit request

Step 1 : Open the left side menu.
Step 2 : Press the Requests.
Step 3 : Accept or Reject the request.
Step 4 : Enter the note and press save.

Malfunctions & Data Diagnostic Event

Step 1 : ‘M’ or ‘D’ icon will blink on the top.
Step 2 : Press ‘M’ or ‘D’ icon on the top.
Step 3 : List of events will show up.
Step 4 : Press the event to check the details.

References

• Smartelds is a FMCSA Registered ELD
• Smartelds is a FMCSA Registered ELD

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>