PHILIPS TAR3205 37 Clock Radio User Guide

: June 3, 2024
: Philips

Table of Contents

TAR3205 37 Clock Radio
**** Safety
FCC INFORMATION
Documents / Resources

TAR3205 37 Clock Radio
**User Guide

www.philips.com/welcome
**

TAR3205 37 Clock Radio

|
---|---
|

|
---|---

www.philips.com/support

Amplifier

Rated Output Power| 200mW RMS
Tuner|
Tuning Range FM:| 87.5-108 MHz
Tuning Grid 100 KHz
Sensitivity
– Mono, 26 dB S/N Ratio| <22 dBf
Total Harmonic Distortion| <3%
Signal-to-Noise Ratio| >50 dBA
General information
AC Power (power
adaptor)| Brand: Philips;
Model: AS030-050-EA060
Input: 100-240V~
50/60 Hz; 0.15A
Output: 5V 0.6A
Operation Power Consumption <3W
Standby Power Consumption <1W
Dimensions (W x H x D) 131 x 54 x 131 mm
Weight (Main Unit) 198.9g

**** Safety

Read these instructions.
Heed all warnings.
Follow all instructions.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the clock radio.
Only use attachments/accessories specified by the manufacturer.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Battery usage CAUTION – To prevent battery leakage which may result in bodily injury, property damage, or damage to the clock radio:
Install all batteries correctly, + and – as marked on the unit.
Remove batteries when the unit is not used for a long time.
The battery shall not be exposed to excessive heat such as sunshine, fire, or the like.
This clock radio shall not be exposed to dripping or splashing.
Do not place any sources of danger on the clock radio (e.g. liquid filled objects, lighted candles).
Where the plug of the Direct Plug-in Adapter is used as the disconnect device, the disconnect device shall remain readily operable.

Notice
Any changes or modifications made to this device that are not expressly approved by MMD Hong Kong Holding Limited may void the user’s authority to operate the product.
Hereby, TP Vision Europe B.V. declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. You can find the Declaration of Conformity at www.philips.com/support.

This product complies with the radio interference requirements of the European Community.
This product is designed and manufactured with high-quality materials and components, which can be recycled and reused.
This symbol means the product must not be discarded as household waste and should be delivered to an appropriate collection facility for recycling. Follow local rules and never dispose of the product and rechargeable batteries with normal household waste. Correct disposal of old products and rechargeable batteries helps prevent negative consequences for the environment and human health.
This symbol means that the product contains batteries covered by European Directive 2013/56/EU which cannot be disposed of with normal household
waste. Inform yourself about the local separate collection system for electrical and electronic collection system for electrical and electronic products and batteries. Follow local rules and never dispose of the product and batteries with normal household waste. Correct disposal of old products and batteries helps prevent negative consequences for the environment and human health.

FCC INFORMATION

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio / TV technician for help.

This device complies with part 15 of the FCC Rules, Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

IC-Canada: CAN ICES-3(B)/NMB-3(B) This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

Philips and the Philips Shield Emblem have registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited or one of its affiliates, and MMD Hong Kong Holding Limited is the warrantor in relation to this product.

TAR3205_37 _QSG_V1.0
© MMD Hong Kong Holding Limited. All rights reserved. Specifications are subject to change without notice.