kogan KAVACJEW66A Ultrasonic Multi Purpose Jewellery Cleaner User Guide
- June 1, 2024
- Kogan
Table of Contents
KAVACJEW66A Ultrasonic Multi Purpose Jewellery Cleaner
Specifications
- Product Name: Ultrasonic Multi-Purpose Jewellery Cleaner
- Model: KAVACJ EW66A
- Capacity: 660ml
- Material: Stainless Steel Tank
Safety & Warnings
WARNING: To reduce potential fire risks,electric shock, or injury, always
observe basic safety prevention measures during use.
Before starting up, ensure to adhere to safety precautions mentioned in the
manual.
Overview
The Ultrasonic Jewellery Cleaner consists of a Lid, Stainless Steel Tank, and
a Control Panel with a Digital Display Screen.
Operation
- Open the lid and place the item to be cleaned in the tank. Fill the tank with water. Note: Operating without water will damage the cleaner.
- Close the lid, connect the power cord, and turn on the outlet. The digital display screen will illuminate.
- Set the timer (default 180 seconds) and choose the appropriate ultrasonic indicator based on cleaning duration.
- Start the cleaning process by allowing the timer to count down.
- After cleaning, unplug, remove the item, empty the tank, and wipe it dry before storage.
SAFETY & WARNINGS
WARNING: To reduce potential fire risks, electric shock or injury, always observe basic safety prevention measures during use.
- Always turn off the electrical outlet and unplug the power cord immediately after use.
- Do not place or drop the jewellery cleaner into water or any other liquids.
- Do not store the jewellery cleaner where it can fall or be pulled into liquids.
- Do not touch the cleaner if it has fallen into water or any other liquid.
- Unplug the jewellery cleaner before filling with water. Do not exceed the ‘MAX’ line.
- Do not touch the electrical outlet with the wet hands to avoid electrocution.
- Do not disassemble the jewellery cleaner yourself. If the jewellery cleaner is dropped or damaged, stop use immediately and contact help.Kogan.com for assistance.
- Keep the jewellery cleaner away from heat and in a dry and flat place.
- Never leave the cleaner unattended when plugged in.
- Do not put abrasives or corrosive chemicals in the jewellery cleaner.
- Do not immerse the jewellery cleaner in water to avoid electrocution.
- Do not skip, substitute or modify any steps or procedures in this guide. Do not use accessories with this jewellery cleaner unless recommended by Kogan.com.
- If the power cord is damaged, stop use immediately and contact help.Kogan.com for assistance.
- After continuous working for 30 minutes, the machine must be shut down for 5 minutes before starting up.
OVERVIEW
OPERATION
Cavitation effect Ultrasonic cleaning takes advantage of the cavitation effect created by high frequency vibrations in a liquid medium. This cavitation effect creates micro bubbles that implode and then burst rapidly with great force. These bursting micro bubbles create a scrubbing action which can clean even the hardest to reach areas very effectively.
Cleaning
-
Open the lid and put the item you wish to clean into the tank. Fill the tank with enough water to submerge the item, without exceeding the ‘MAX’ line.
Note:
Operating the jewellery cleaner without water will damage it. -
Close the lid. Connect the power cord into an electrical outlet and turn the outlet on. The digital display screen will illuminate.
-
Press the ‘SET’ button to cycle between 5 timer durations (180s, 280s, 380s, 480s, 90s). The timer will be set to 180 seconds by default.
-
Press the ‘ON’ button to start cleaning the item. The corresponding ultrasonic indicator will flash, and the timer will count down:
- Indicator 1: 180 seconds.
- Indicator 2: 280 seconds.
- Indicator 3: 380 seconds.
- Indicator 4: 90 seconds or 480 seconds.
Press the ‘OFF’ button to pause cleaning and the ‘ON’ button to resume.
-
Turn off the electrical outlet and unplug the power cord. Open the lid and remove the item from the water. Pour the water out into a sink and wipe the tank dry with a cloth before storing.
Cleaning methods
Note :
- Determine the amount of detergent and cleaning time by how dirty the item is.
- After continuous use for 30 minutes, the jewellery cleaner must be turned off for at least 5 minutes before using again.
Incompatible Items
The following items are NOT suitable for ultrasonic cleaning:
- Mobile phones.
- Watches and watch dial plates.
- Coated glasses (i.e., prescription glasses).
- Glasses frames or other items made from shells or tortoise shells.
- Soft jewellery, (pearls, emerald, ivory, coral, agate, etc.).
- Welded, plated and glued items.
- Inlay studs and unfastened decorations.
- Clothes, wood, leather, ceramic or other materials that fade easily.
Compatible Items
The following items are suitable for ultrasonic cleaning
Item | Description | Recommended cleaning method | Recommended cleaning time |
---|---|---|---|
Glasses | Reading glasses, sunglasses, etc. | Detergent cleaning | 1-3mins |
Watch accessories | Watch bands. | ||
Jewellery | Necklaces, rings, earrings, bracelets, etc. | ||
Hygiene products | Electric shaver heads, razor blades, dentures, combs, | ||
toothbrushes, etc. | General cleaning | ||
Metal items | Watch parts, ancient coins, badges, machine nozzles, etc. |
3-5mins
Stationary| Pen-heads, printer- heads, ink cartridges, seals, etc.
Utensils| Forks, knives, spoons, etc.| Segment cleaning (if needed)
Notes
- When cleaning glasses, ensure they are facing up in the tank.
- Ensure inlay jewellery is intact and firm. Ultrasonic cleaning may cause inlayed stones to fall off.
- If jewellery is oxidised, it is recommended to clean it with silver cleaning liquid prior to ultrasonic cleaning.
CLEANING & CARE
Disposal
This marking indicates that this appliance should not be disposed with other
household wastes. To prevent possible harm to the environment or human health
from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources.
SPECIFICATIONS
- Overall size 196 x 132 x 105mm
- Tank size 155 x 87 x 50mm
- Volume 660ml
- Power supply AC 100-120V 60Hz AC 220-240V 50Hz
- Power 35W
- Frequency 46kHz
- Time setting 5 adjustable timers
- Net weight 750g
Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com kugan.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>