ferm Living 1104269300 Rouli Center Module Lounge Chair User Manual
- June 1, 2024
- ferm LIVING
Table of Contents
ferm Living 1104269300 Rouli Center Module Lounge Chair
Product Information
Specifications
- Product Name: Rouli Center Module
- Contents: Backrest Foam, Fabric Cover, Seat Foam
- Assembly Level: Moderate
- Manufacturer: Fermliving
Product Usage Instructions
Assembly Process 1:
- Take the backrest and seat foam out of the black fabric bag and carefully cut the vacuum bag. The foam will quickly expand. Put the parts on a table.
Assembly Process 2:
- Pull the backrest of the fabric cover over the backrest foam. Match the edge of the foam with the stitching.
Assembly Process 3:
- Push the seat foam into the front of the seat. Match the edge of the foam with the stitching.
Assembly Process 4:
- Place one hand between the foam blocks. Using the opposite hand, rotate the seat foam and push it into place.
Assembly Process 5:
- Gently close the zipper, section by section. If it becomes stuck, do not use excessive force. Wait 24 hours before usage.
FAQ
Q: What should I do if the zipper gets stuck during assembly?
A: If the zipper gets stuck, avoid using excessive force. Try gently adjusting the fabric and foam to align properly before attempting to close it again.
Q: Can I use the product immediately after assembly?
A: It is recommended to wait for 24 hours after assembly to allow the foam to fully expand and set before using the product for optimal comfort and durability.
General Instructions
PLEASE READ BEFORE INSTALLATION
WARNING:
- The safety of this fitting can only be guaranteed if the following instructions are observed during both installation and use. Please retain these instructions safely after installation.
CARE INSTRUCTION:
- Cover: 30°C gentle wash.
- Inside: Professional dry cleaning only.
Box Content
Assembly Process
- Take the backrest and seat foam out of the black fabric bag and carefully cut the vacuum bag.
- The foam will quickly expand. Put the parts on a table
- Pull the backrest of the fabric cover over the backrest foam. Match the edge of the foam with the stitching.
- Push the seat foam into the front of the seat. Match the edge of the foam with the stitching
- Place one hand between the foam blocks. Using the opposite hand, rotate the seat foam and push it into place.
- Gently close the zipper, section by section. If it becomes stuck, do not use excessive force. Wait 24 hours before usage.
- fermliving.com
MORE INFORMATION:
- To access further information such as product overview and material descriptions, please visit our website at www.fermliving.com.
- If you have any questions or comments, please do not hesitate to contact us at info@fermliving.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>