LASER EPS-SPDIB-320 TWS Earbuds with Mini Ear-Hook User Manual
- June 1, 2024
- Laser
Table of Contents
LASER EPS-SPDIB-320 TWS Earbuds with Mini Ear-Hook
Product Information
- Specifications
- Product Name: TWS Earbuds with Mini Ear-Hook
- Model: EPS-SPDIB-320
- Control: Button controls (not touch-sensitive)
- Charging Port: USB-C (located at the back of the case)
- Indicator: Charging control button and charging indicator light
Product Usage Instructions
- Setting Up
- Take the earbuds out of the case; they will power on and sync with each other. Place them in your ears.
- On your connecting device, go to Settings, turn on Bluetooth, and search for nearby devices.
- Select EPS-SPDIB to pair with your device. The earbuds will confirm the connection with a voice prompt. From now on, any audio played on your device will be transmitted through the TWS earbuds.
- Function Operation
- Power on: Press and hold the Control button until the earbud powers on.
- Power off: Press and hold the Control button until the earbud powers off.
- Play/Pause: Press once.
- Volume up: Press 3 times on the Right earbud.
- Volume down: Press 3 times on the Left earbud.
- Play the next track: Press twice on the Right earbud.
- Play the previous track: Press twice on the Left earbud.
- Answer/end call: Press once.
- Reject call: Press and hold for 2 seconds.
- Activate Voice Assistant (VA): Press and hold for 2 seconds until you hear VA’s bell sound.
- Troubleshooting
- If you experience any issues with the TWS Earbuds, please refer to the troubleshooting section in the user manual or contact product support for assistance.
FAQs
- Q: How do I charge the earbuds?
- A: To charge the earbuds, connect the USB-C cable to the charging port located at the back of the case.
- Q: Can I use only one earbud at a time?
- A: Yes, you can use either the left or right earbud independently for mono audio playback.
- Q: How do I know when the earbuds are fully charged?
- A: The charging indicator light will turn solid green when the earbuds are fully charged.
WHAT’S IN THE BOX
- TWS earbuds
- Charging case
- Additional ear tip pair x2
- USB-C to USB-C charging cable
- User manual
OVERVIEW
The controls are not touch-
sensitive; instead, physically press the buttons, which are not visibly
apparent.
CHARGING
- Fully charge the earbuds and the case before first use with the supplied cable. We recommend using a standard 5V USB wall charger, laptop/PC or powerbank.
- When the case is being charged, the display will show the current battery capacity level.
- Place the earbuds in the case; the indicator on the earbuds turns red, indicating charging. They turn off when fully charged.
- Press and hold the Charging control button to stop charging, and press it again to resume.
- Earbuds will sound an alert when the battery is low.
SETTING UP
- Take the earbuds out of the case; they will power on and sync with each other. Place them in your ears.
- On your connecting device, go to Settings, turn on Bluetooth and search for nearby devices.
- Select EPS-SPDIB to pair with your device. The earbuds will confirm the connection with a voice prompt. From now on, any audio played on your device will be transmitted through the TWS earbuds.
- NOTE:
- If EPS-SPDIB does not appear on the connecting device, retry from step 2.
- Your earbuds auto-turn off after 3 minutes of no connection. Place them in the charging case and restart from step 1 if needed.
- The earbuds can be paired with multiple devices, but can only play music from 1 paired device at a time.
FUNCTION OPERATION
| FUNCTION | OPERATION |
|---|---|
| Power on | Press and hold (approx. 3 sec.) until the earbud powers on. |
| Power off | Press and hold (approx. 5 sec.) until the earbud powers off. |
| Play/Pause | Press once. |
| Volume up | Press 3 times on the Right earbud. |
| Volume down | Press 3 times on the Left earbud. |
| Play next track | Press twice on the Right earbud. |
| Play previous track | Press twice on the Left earbud. |
| Answer/end call | Press once. |
| Reject call | Press and hold for 2 seconds. |
| Activate Voice Assistant (VA) | Press and hold for 2 seconds until you |
hear VA’s bell sound.
SAFETY PRECAUTIONS
- Excessive volume can harm your hearing.
- Be cautious when using the device while walking, driving or cycling to prevent accidents.
- Caution: This product contains magnets that may interfere with pacemakers or other medical devices. Keep it away from individuals with such devices, and consult your doctor before use.
- Store out of reach of children and supervised individuals to prevent accidental ingestion.
- Clean using a soft, dry cloth.
- Avoid exposing the earbuds to damp, dusty or prolonged hot/sunny conditions.
- Extreme temperatures (below 0°C or above 45°C) may deform the device and diminish battery capacity and lifespan.
- Follow local laws for proper disposal and battery recycling; avoid putting it in curbside bins.
TROUBLESHOOTING
- If sound is only coming from one earbud:
- Ensure both earbuds are charged.
- Reset synchronisation by placing both earbuds back in the charging case, then take them out and wait until they sync. (If not synchronised, both earbuds flash red and blue; when synced, only one earbud flashes.)
- If earbuds won’t connect to other devices:
- Check that Bluetooth is enabled on your device.
- Confirm no other device is paired with the earbuds.
- Keep the earbuds next to the device during the initial connection.
SPECIFICATIONS
- Bluetooth version: V5.3
- Bluetooth range: 10m
- Earbud battery capacity: 30mAh
- Charging case battery capacity: 200mAh
- Power input: 5V
Product support:
- E:support@laserco.com.au.
- P: (02) 9870 3355
- MODEL: EPS-SPDIB-320
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>