CRL-10303 High chair Carrello Cascata Instructions

CRL-10303 High chair Carrello Cascata

Product instructions

• Standard: With EN 16232:201 3 and EN 14988:2017standard
• The high chair can be adjusted to 6 height positions
• The high chair can be adjusted to 4 backrest positions
• Detachable plastic activity tray
• The activity tray can be adjusted to 3 positions on front and back
• Removable and washable seat cover
• The high chair can be folded, easy for storage
• The footrest can be adjusted to 3 positions
• 5 point safety harness
• 12 melodies for choose and the volume can be adjusted
• In swing status, 8 swing speeds
• Timer setting
• Detachable toy frame, the toys can be changed as you like
• Remote control, Bluetooth, app function

Safety warnings

1. Always use the safety harness.
2. Make sure all the locking equipment in locked before use.
3. Don’t leave the child unattended.
4. Suitable age range: 6-36 months (High Chair).
5. Maximum weight of child: 20kgs (High Chair).
6. Never use the toy bar to lift and move high chair.
7. Never move the high chair when the child is seated inside.
8. Always place the high chair on a horizontal stable surface. Never place it near stairs or steps or any high place from ground, and to prevent the risk of falling.
9. Do not place the high chair on rough and easy ro[ing over project
10. Keep the battery away from child always, play the new or old battery is mustn’t for child.
11. Do not let child stand in the high chair to prevent from falling down or enlaced and strangled by safety harness or other accidents.
12. Make sure the child away from product before opening and folding.
13. Ensure the battery in correct polarity in case of short circuit.
14. Do not use accessories or replacement parts other than those approved by the manufacturer if any parts are damaged or missing
15. Do not use the high chair unless a[ components are correctly fitted and adjusted.
16. Keep away from fire.
17. Do not hang anything on the high chair, as they might affect the stability.
18. The exhausted batteries must be removed, rechargeable batteries should be charged by adult.
19. Always follow the instructions, they might affect dangerous if false assemble.
20. Do not mix different sort of batteries as it may cause liquid leakage and explosion.
21. Suitable for 0-12 months (swing status).
22. This product is not intended for prolonged periods of sleeping.
23. This product does not replace a cot or bed should your child need to sleep, then it should be placed in a suitable cot or bed.
24. Non-rechargeable batteries are not to be recharged.
25. 0ld or new batteries cannot be mixed.
26. Exhausted batteries are to be removed from the product, take out the batteries from product when you don’t use for long time. 27 Adapter used with the infant swing are to be regularly examined for damage to the cord, plug, enclosure and other parts, and in the event of such damage, they shall not be used.
27. Input voltage of adapter should be 100-240V-50/60Hz 0.3A, Output voltage: 5-6V :o:;800mA
28. Keep away from the children, when you use the adapter.

Composition of the high chair

Assembling The Parts

WARNING! It should be installed by adult.

1. As below picture shows, open the front leg tube.
   WARNING! If it is not reached in position, there will be shaking, please check carefully.

2. Keep the main and assist model located at the under frame, an audible click is heard, signaling that are securely fitted as follows.

3. As below pictures, insert the left and right boom tube into its fixed set, until audible click is heard.

4. As below pictures, insert the left and right boom tube into its fixed set, until audible click is heard.

5. Fix the left and right boom tube as follows.

6. Fit the rigid crotch strap to the activity tray.

7. Press the activity tray buttons; fix it on the seat as follows.
   Swing High chair with dinner tray

8. Press the toy frame buttons; fix it on the seat as follows.
   Swing with toy arch

9. Aim the footrest into the opening of the footrest, and press down to make it fix well, the footrest have three different sections to adjust height , when the footrest up to a higher height, you can use the thread to adjust the seat cover.

10. Fix the seat cover to the seat frame, insert the safety harness into the slot accordingly and locked, fasten the button on seat and fabric. The elastic should be passed through footrest and fixed.

11. Use a screwdriver to take screw out of the battery cover, and take the battery cover out. Put batteries into the battery jar according to the correct polarity, then put the battery cover back and fasten it. Use the same way to take out battery.

Function

1. Both sides of the seat should fix in place, keep the seat designated position, and not tilt.

2. Backrest can be adjusted to 4 positions. One hand hold the adjust button, backrest can be adjusted to 4 positions.
   Notice: backrest can be adjusted 2 positions once the seat in lowest position.

3. Introductions for backrest adjustment function:

4. Backrest adjusted from the first position to the second or third position, just push up the backrest by hand, no need to operate the adjustment button.

5. Backrest adjusted from the third position to fourth position, it must operate the adjustment button, as following picture showed.

6. Activity tray can be adjusted to 3 positions.

7. Clean the tray.

8. As shown, keep your hands on both sides of the footrest button at the same time and press down to adjust up and down (4 sections).

9. While the seat is lowest position, high chair can be converted to swing. Same step for swing convert to high chair.
   Warning: In swing status, the seat height can’t be adjusted.
   Warning: The swing rocking function must be closed when swing convert into high chair.

10. In swing status, backrest can be adjusted to 2 positions.

11. As following picture. Place the baby into seat pad, lock the safety button, and then cover the protective bag. The length of the safety harness can be adjusted by shoulder and waist button as following picture.

12. Instructions for AC adapter insert the DC plug 2 of adapter into power connector 1 then insert AC plug 3 into 100-240V 50/60Hz 0.3A AC socket. Please take the AC plug 3 and DC plug 2 out when stop to use.

13. Put the DC plug into the hole of battery box when use the battery, and please take the plug out for electric power saving if long time no use.

14. Press the folding button and close the front leg tube at the same time for folding. In a way the frame can stand upright on its own.
    Warning: folding is mustn’t in swing status.

Control panel function instruction:

1. There are 8 types of swing speed (8 indicator lamps) on speed adjust button. Press “+” for speed up,”-” for speed down (as below picture shows).
2. There are three types of time setting. Press the button once, light will be on for 8 minutes. If time setting function is not used, all using function will start working until power is off.
3. USB connector. It can connect U-disk and play music in U-disk according to function fourth and fifth.
4. Play/pause button. Press the button once to start playing music. Press it second time to stop playing music. The button has the same function under U-disk and APP mode.
5. Volume/next song button. After pressing music play button, press this button to play next song (the swing has 12 melodies). Press “volume/next song” button for a while to adjust volume. After concerning volume, release your hand. Use the same way to adjust volume under U-disk and APP mode.
6. Bird and water sound button. Press “bird sound” button for bird sound, press it again to stop. Press “water sound” button for water sound, press it again to stop.
7. Motion detection. When pressing this button, indicator light will be on. Press any button to quit this mode. If voice control detection sensor receives continual two or more sound, the machine will start working. It will swing in lowest speed and play music of the swing in middle volume.
8. Mode switch button. Press the button to switch mode between swing and U-disk.

Mode switches instructions:

1. When smartphone and U-disk is not connected, only swing music are available. When you press the mode switch button, the music will be stopped for a second then back to swing mode automatically and music will be continually played.
2. When U-disk is inserted and smartphone is disconnected, it can only be switched under U-disk and swing mode.
3. When smartphone is connected and U-disk has not been inserted, it can only be switched under smartphone and swing mode.
4. When both smartphone and U-disk are connected, music can be changed under any mode.

APP mode activation instructions (only available in Bluetooth APP)

1. Scan QR code on instruction. Download APP and install it on you android smart phone.
2. Switch on power of electric swing.
3. Activate the APP according to the different mobile system after downloaded and installed APP.

APP function introduction

iPhone APP download instructions (suitable for iso8.3.0 or above system)
Warning! iPhone and IOS system must be a genuine version, anti- counterfeiting and jailbreak system can’t install.

1. Click the icon”App store” to the next step, make sure the network are useful before download.
2. Input and search “Swing control”, then click “open” Swing control APP icon to download, return to main page after instal­lation.

iPhone APP activation and connection instructions

1. Open the mobile setting, keep Bluetooth setting on. Search and pair with Swing-018A.
2. Return after paired, then exit and return to main page.
3. Click Swing control on main page.
4. It indicates successful if it shows “connected” on upper right corner. If it shows disconnect, exit and take the step 1 to 3 again.

iPhone music play and APP music added

1. Click “MODE” on main model or mobile phone APP.
2. Click the menu enter into APP local music menu.
3. If there is no music, it will pop up instruc­tions, follow it to operate.
4. Follow the instruc­tions add the music or play the third party APP music if APP local place haven’t. As shown, APP local music player and other (make sure it have music and network available if use the third party APP).
5. Back to main page on mobile mode, open the third party music player to play the mobile music.
6. Other functions operation need to back the main page if you use the third party player.

iPhone repeat connect instructions

1. Click “Swing control” APP to enter.
2. Then click settings, enter into pairing page, choose Swing-018A to pair and connect. Repeat the step 1 to 4 to activate.
3. If the APP is activated and used in before, then you can turn on the Bluetooth and directly use APP.
   Notice: There is no step 2 and 3 and APP connect automatically if open Bluetooth first.

Android system APP download instructions (suitable 4.3.0 or above system)

1. Scan the QR code

Android mobile APP activation and connection instructions

1. Click mobile settings, turn on the Bluetooth and enter into pairing page, choose Swing-018A to pair and connect.
2. Click installed Swing control” APP icon to enter.
3. Choose swing-018B on device list to activate. (If the device haven’t searched the Swing- 018B, exit and restart. The search takes about 2 minutes)
4. It is successful if it shows “connected” on upper right corner.
5. It indicates successful if it shows “connected” on upper right corner. If it shows “disconnect”, exit and take the step 2 to 5 again (please ignore the forth step if it activate successfully not appear this step).
6. Click mobile back icon, it will pop up the dialog. Choose “background running” exit APP main page and use normally other functions. Choose exit to exit the APP for all the APP functions will be stopped.
7. Repeat use APP, follow the pop up dialog, click “allow” to activate APP (It will connect automatically if Bluetooth opened).

Care and maintenance

1. Clean the metal parts: use warm water to add a mild detergent to wipe, dry them to prevent rust.
2. Clean seat cover: wipe with a mild detergent, and then rinse with warm water.
3. Keep it away from rain or near water and a very hot or dusty environ­ment.
4. Excessive exposure or strong heat will make the plastic parts aging, cloth fade.
5. Please do not put other things on the product when in storage
6. When the parts are damaged, please stop using or replacing the parts.

carrellobaby.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>