carrello CRL-6511 Cart Last Ocean Green Instruction Manual

carrello CRL-6511 Cart Last Ocean Green

PARTS

1. Seat-1pcs
2. Frame-1pcs
3. Bumper-1pcs
4. Rear wheel-2pcs 5. Front-wheel-2pcs
5. Canopy-1 pcs
6. Carrycot adapter-2pcs
7. Carrycot-1 pcs

Open the stroller

Unfold the stroller pulling the handle up until locks on both sides of the stroller are locked in place. (pic 1a, 1b).
NOTE: Make sure the stroller is properly unfolded.

Assembly  Disassembly of front wheels

1. Insert the vertical shaft of the front wheel into the hub until it is locked in place. Make sure the wheel is properly secured. Repeat on the other side. (pie. 2a)
2. Move the locking mechanism down to lock the front swiveling wheels. Move the locking mechanism up to unlock the front wheel. (pic. 2b)
3. Press down the steel lever and simultaneously take the wheel off the hub. (pic. 2d)

Assembly Disassembly of rear wheels

1. Insert the rear wheel into the rear hub until it is locked in place. Make sure the wheel is properly secured. Repeat on the other side. (pic. 3a)
2. Press down the steel lever and simultaneously take the wheel off the hub (pic 3b)

Parking brake

Press the brake pedal down to lock the rear wheels. Lift the brake pedal to unlock the rear wheels. (pie. 4a)

Seat attachment

Insert the seat into the frame hub until it is locked in place. Make sure the seat is properly secured. Press down the release buttons on both sides of the seat, you can press the release buttons one by one, then pull up the seat to take it off the frame. (pic. 5a, 5b)

Front bumper

1. To assemble the bumper, insert it on plastic openings on both sides of the stroller frame. Make sure the bumper is properly secured. (pic 6a)
2. To detach the bumper bar, press the buttons located on the outside of the bumper bar simultaneously and take it off the openings in the frame of the stroller. (pic. 6b)
3. To open the bumper bar, press the button located on any side of the bumper bar and rotate the bumper. (pic. 6c)

Canopy assembly

Assemble the endings of the canopy on the plastic elements of the guide bar. Make sure the canopy is properly secured (pic. 7a)

Footrest

1. To lift the footrest, simultaneously press the adjustment buttons on both sides of the footrest and adjust the footrest to the desired position. (pic. 8a,  8b)
2. To lower the footrest, simultaneously press the adjustment buttons on both sides of the footrest and adjust the footrest to the desired position. (pic. 8a, 8b)
3. To adjust the length of the footrest, press the length adjustment button on the bottom of the footrest and adjust the length to the desired position. (pic. 8c)

Canopy adjustment

1. To change the position of the canopy, hold its top part and adjust it to the required position. (pic. 9a)
   NOTE : The canopy must be fully closed before folding the stroller.

Backrest adjustment

Pull the backrest adjustment button to adjust the backrest up and down to the desired position (pie. 10a, 10b)

Handlebar adjustment

To adjust the handle bar press the button on the handle and simultaneously adjust the height of the handlebar (pic 11a).

Reversible seat

The seat can be installed facing forward or backward if necessary. (pic. 11b)

Folding the stroller

1. Fold up the footrest to the highest position, press the button on the handle, and push the handle bar down slightly until it is in the lowest position. (pic. 12a)
2. Press the button on the frame handle (pie. 12b) then simultaneously lift the frame handle up or lower down the handle bar (pic. 12c) to fold the stroller. (pic. 12d)

Safety belts

1. To assemble/adjust the height of the seat belts, take them out of the openings in the backrest/seat unit and the upholstery and insert them through openings in the upholstery and the seat unit/backrest at the desired height. (pic 13a)
   NOTE! Before locking the child with the seat belts, make sure that the seat belts are properly assembled.

2. To fasten the child, lock the belts together and insert them into buckle housing. Adjust the length of the belts with buckles on both sides. (pic. 13b)

Carrycot

1. To unfold the carrycot, pull the steel frames down and to the sides of the carrycot, until they are locked in the plastic grooves. (pic. 14a)
2. Assemble the other parts of the carrycot.
3. The backrest can be adjusted in two positions. (pic. 14b)
4. To adjust the position of the canopy on the carrycot, hold its top part and adjust it to the required position.
5. Insert the carrycot adaptor into the stroller frame with slight strength until you hear the “click” sound which means the adaptor is locked. Press the release button and pull the adaptor then you can take off the carrycot adaptor. (pic. 14c)
6. Align the carrycot with the adaptor and push down with slight strength until you hear the “click” sound which means the carrycot is properly installed in the stroller frame. (pic. 14d)
7. Press down the release buttons on both sides of the seat, you can press the release buttons one by one, then pull up the seat to take it off the frame. (pic. 14e)

Warning

Bassinet is suitable for babies from 0-6 months, weighing not more than 9kg, and not suitable for babies who can sit unaided, roll over or push up on their elbows and knees. Do not put an additional mattress, thicker than 15mm.

• Never leave the child unattended
• Ensure that all the locking devices are engaged before use
• To avoid injury ensure that your child is kept away when unfolding and folding this product
• Do not let the child play with this product
• Always use the restraint system
• Check that the pram body or seat unit or car seat attachment devices are correctly engaged before use
• This product is not suitable for running or skating
• Maximum weight and age of the child for which the product is suitable: 22 kg or 4 years whichever comes first.
• The parking device (brake) should be activated when putting the child in or taking the child out of the stroller
• When parking the stroller, always activate the brake (parking device)
• The maximum load of the basket is 3 kg.
• The maximum load of the bag is 2 kg.
• Any load on the handle and/or posterior part of the backrest and/or sides of the stroller will influence the stability of the stroller.
• The stroller is intended for use by one child.
• Do not use any accessories which are not approved by the manufacturer
• In the event any defects are detected, do not use the product and contact the seller.
• WARNING Never go down or up the stairs with the stroller (also on slides), especially with a child inside – it may lead to serious injury to the child and damage to the stroller.
• WARNING Never lift or move the product with the child inside it.
• WARNING Always assemble all protective and securing elements of the stroller in compliance with instructions.
• WARNING Always attach the crotch belt on the bumper bar.
• WARNING Do not leave the stroller with a baby on the slope, even if the brake is locked.
•  WARNING Driving on the pavement or any other step the front axle should be lifted

carrellobaby.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>