carrello CRL-6509 Sigma 2in1 Universal Baby Stroller Instructions

carrello CRL-6509 Sigma 2in1 Universal Baby Stroller

MAIN PARTS

1. Seat
2. Canopy
3. Frame
4. Bumper bar
5. Front-wheel and rear-wheel
6. Carrycot

BEFORE USING READ CAREFULLY THIS MANUAL AND KEEP IT FOR FUTURE

OPEN THE STROLLER

1. Unlock the stroller as the arrow indicated (pic.1a).
2. Pull out and pull up the handle.
3. Press the button on the handle with your finger at the same time pull up the handle (pic.2a).
4. When the stroller is opened (pie 2b), you should hear “click” sounds on both sides of the stroller, please examine if the stroller is locked in a safety position before you use it.

ASSEMBLY AND DISASSEMBLY OF THE FRONT WHEELS

• Take the front wheel and insert the vertical shaft into the plastic hole on the wheelhouse (pic.4a-4b), until it is locked, then install the other wheel the same way.
• To disassemble the front wheels, press the small metal pins and at the same time use the other hand to remove the front wheel.

LOCKING AND UNLOCKING OF THE FRONT WHEELS

• Front wheels can rotate 360 degrees.
• To lock the rotation please lift the plastic button on the front of the wheels, and press down the plastic button to release the rotation (pie. 5a).

ASSEMBLE AND DISASSEMBLE OF THE REAR WHEELS

• Take the rear wheel, insert the rear axle into the plastic hole on the left or right side (pic.3a-3b) until it is locked, then install the second wheel on the opposite side the same way.
• To remove the rear wheel, pull the metal hook (underneath the rear wheel unit), then use the other hand to remove the rear wheel.

STROLLER BRAKE:

• Step down on the brake pedal to lock the wheel rotation, lift the pedal to release the brake (pie. 5b)
• WARNING: Always lock the brake when you put the child in or take the child out of the stroller.

ASSEMBLE THE SEAT

• Pull up the puller on top of the back side of the backrest, you can adjust the angle of the backrest and push forward to fold the seat (pic.6a).
• Press both ends of the bottom in the middle of the backrest to adjust the height of the canopy and the headrest, the height can be adjusted to 3 different positions and the height between the highest position and the lowest position is 6cm, the canopy and headrest need to adjust together (pic.6b). Assemble the hood Insert the hood plastic into the seat (pie. 7a).
• Assemble the bumper Insert the bumper on both sides of the seat (pie. 7b).
• NOTE: please make sure to lock the bumper in place when you hear a “click” sound.

ASSEMBLE/DISASSEMBLE AND REVERSE THE SEAT

• Put down the seat as the arrow indicated (pic.8a). Please make sure to lock the seat in place when you hear a “click” sound.
• Press the unlock button on both sides of the seat at the same time pull up the seat to take off the seat (pic.8b).
  Pull out the button and lift the seat in the arrow direction (pic. 8c), then assemble the seat in the opposite direction (pic. 8c), and insert the seat in the frame to finish the assembly.

ADJUSTING THE BACKREST

• Lift the button (pic. 9a) to adjust the backrest to be in 3 positions (sleeping or seat) (pic. 9b).
• Open and fold the hood. Extend or fold the hood (pic. 9c).
• Rotate the bumper unlock and pull out one side of the bumper to rotate the bumper 360 degrees (pic.9d).
• Telescope handlebar Press the button as the arrow 1 (pic. 9e).
• Adjusted the footrest Press the button (pic. 9f) to adjust the footrest in 3 position

FOLDING THE STROLLER

Fold the seat (pic.10a)

• Press the second lock and at the same time press the adjust handle button, then push down the handle with slight power to unlock the stroller (pic. 10b)
• Press the adjust handle button to let the handle descend, the stroller is folded and locked until you hear a “click” sound (pic. 10c-10d).
• The stroller can stand after folding (pic.10e).

ASSEMBLY AND DISASSEMBLY OF THE CARRYCOT:

• To unfold the carrycot frame, remove the bedding and the mattress, and then pull the metal tensioners on the bottom plate of the carrycot body in the direction of the arrows (pic 11a-11b), until it locks in special holders.
• You should hear a “click” sound confirming the locking of the tensioner in the holders.
• NOTE! The carrycot body is designed for children from birth up to 6 months old weighing not more than 9kg, who cannot sit, kneel, or turn by themselves.
• Stop using the carrycot if your child starts sitting, kneeling, or turning by itself.
• WARNING: Do not use an additional mattress with a thickness of more than 15mm.
• The carrycot canopy has a 4-step adjustment. To adjust it, press simultaneously the buttons located at the base of the canopy and adjust the desired position (pic.11b-11c). You can extend the canopy by pushing the canopy tube.
• Assemble the carrycot in the direction of keeping the baby’s face to the adult.
• NOTE! The carrycot can be assembled only back to the direction of travel (in this setting, the person pushing the stroller is face-to-face with a child).
• NOTE! Lock the safety brake before you assemble the carrycot on the stroller frame.
• To assemble the carrycot on the stroller frame, remove the seat, then assemble the carrycot.
• You should hear a “click” (pic.12a-12b).
• NOTE! Before using, make sure that the stroller body is properly assembled.
• NOTE! Lock the safety brake before you remove the carrycot. To remove the carrycot, press simultaneously the buttons located on the adapters of the carrycot and pull it upwards.

SAFETY BELTS:

• There are 2 positions for safety belts, the upper position is suitable for a child older than 6 months, and the lower position is suitable for a child under 6 months old.
• Click the safety belts into the buckle on both sides to lock the safety belt (pic.13a-13b).
• Press the middle button to release the safety belts.
• The length of the seat belts can be adjusted on both sides.

FOOTREST LENGTH ADJUSTABLE

• The length of the footrest is adjustable, you can adjust the footrest by pushing the button under the footrest (pic 14), pressing the button down at the same time pulling the footrest, then the footrest becomes longer, pressing the button down at the same time push the footrest, the footrest becomes short.

WARNING!

• The bassinet is suitable for babies from 0-6 months, weighing not more than 9kg, and not suitable for babies who can sit unaided, roll over, or push up on their elbows and knees.
• Do not put an additional mattress, thicker than 15mm.
• WARNING Never leave the child unattended.
• WARNING Ensure that all the locking devices are engaged before use.
• WARNING To avoid injury ensure that your child is kept away when unfolding and folding this product
• WARNING Do not let the child play with this product.
• WARNING Always use the restraint system.
• WARNING Check that the pram body seat unit or car seat attachment devices are correctly engaged before use.
• WARNING This product is not suitable for running or skating.
• WARNING Maximum weight and age of the child for which the product is suitable: 22 kg or 3 years whichever comes first.
• WARNING Parking device (brake) should be activated when putting the child in or taking the child out of the stroller.
• WARNING When parking the stroller, always activate the brake (parking device).
• WARNING Maximum load of the basket is 3 kg.
• WARNING Maximum load of the bag is 2 kg.
• WARNING Any load on the handle and/or posterior part of the backrest and/or sides of the stroller will influence the stability of the stroller.
• WARNING The stroller is intended for use by one child.
• WARNING Do not use any accessories that are not approved by the manufacturer.
• WARNING In the event any defects are detected, do not use the product and contact the seller.
• WARNING Never go down or up the stairs with the stroller (also on slides), especially with a child inside it may lead to serious injury to the child and damage to the stroller.
• WARNING Never lift or move the product with the child inside it.
• WARNING Always assemble all protective and securing elements of the stroller in compliance with instructions.
• WARNING Always attach the crotch belt on the bumper bar.
• WARNING Do not leave the stroller with a baby on the slope, even if the brake is locked.
• WARNING Driving on the pavement or any other step the front axle should be lifted.
• carrellobaby.com

Documents / Resources

| carrello CRL-6509 Sigma 2in1 Universal Baby Stroller [pdf] Instructions
CRL-6509 Sigma 2in1 Universal Baby Stroller, CRL-6509, Sigma 2in1 Universal Baby Stroller, 2in1 Universal Baby Stroller, Universal Baby Stroller, Baby Stroller, Stroller
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>