ELMAG 14706 Impact Multifunction Welding System Instructions

June 1, 2024
ELMAG

IMPACT MULTIFUNCTION WELDING SYSTEM

TECHNICAL FACTS

SYNSTAR 330 TS, art 388
including removable feed device, transport trolley, earth cable 50 sqmm/3.5 m with clamp, 4-roller wire feed, roller Ø 30mm for 0.6/0.8 & 1.0/1.2 mm for steel wire!!! 15-330 amps, duty cycle 60% at 300 amps. (no water cooling, intermediate hose package, hose package & pressure controller)

APPLY NOW FOR UP TO 24 MONTHS WARRANTY!
Simply register at https://welding.cebora.it/de/assistance/register-your- product within 15 days of purchase.

CEBORA serial no.:

Article Number: 14706
EAN Code: 9004853147067

Now included for a short time free of charge:
14720 | impact multifunction welding system

PRODUCT HIGHLIGHTS
SYNSTAR 330 TC & 330 TS SYNERGIC

The new SYNSTAR 330 TC and TS are three-phase multi-process power sources with inverter technology for MIG, TIG and MMA welding including 4-roll wire feeder from Cebora (Ø 30mm). The SYNSTAR models offer functions including dual value circuit (MIG Short process) and pulse and double pulse operation, as well as more than 70 welding programs for wire diameters 0.8/0.9/1.0/1.2mm. Synergetic programs for pulse welding of stainless steel are also provided, which are optimized for thin metal sheets. The TC model is available as a compact unit and the TS version as a 2-part unit.

Two different types of hose package can be used with this power source:
– The air-cooled orig. BINZEL hose package MB EVO 36
– The water-cooled orig. BINZEL hose package MB EVO 501

LCD TOUCH display

The LCD TOUCH display allows fast and intuitive selection of process, wire type, gas type, current, thickness, voltage and wire feed speed. The power source offers numerous functions that can be set on the TOUCH display, such as: arc length, short arc or pulse welding, 2-stroke or 4-stroke operation, spot welding time, pause time, throttle effect, push-pull force, burnback, soft start, gas pre-flow and gas post-flow. If required, it is also possible to equip it with a cooling unit (art. 1681). This particularly versatile power source is suitable for numerous applications, especially in medium-sized steel structures, and is characterised by its low current consumption (PFC). Complies with the EN 61000-3-12 standard.

Standard configuration

– SYNSTAR 330 TS
– Earth terminal with 3.5 m earth cable 50 mm²
– Welding cable plug, Ø 13 mm, 35/50/70 mm²
– Feed ring Ø 30 mm for welding wire Ø 0.6-0.8 and 1.0-1.2 mm f. Fe/CrNi/CuSi
– Operating instructions / CE

Possible applications

– Mechanical engineering
– Plant construction
– Container construction
– Steel construction
– Metalworking shops
– Forging
– Agriculture

Materials

– Steel
– CrNi
– Aluminium
– MIG brazing
– Cored wire

SPECIFICATIONS
Material thickness 0,8 – 12 mm
steel / stainless steel wire diameter 0,8 – 1,2 mm
welding voltage adjustment 14,5 – 30,5 V
aluminum wire diameter 1,0 – 1,2 mm
welding wire roll diameter 200 / 300 mm
MIG-soldering diameter 0,8 – 1,2 mm
welding wire roll weight 5/15 kg
duty cycle 270 A
welding current setting  15 – 330 A
ground connection plug / cross-section 13 / 50 O / mm2
wire feed speed  22 m/min
welding power source (10 min at 40 °C) at welding current 40 / 330 % / A
Max. power consumption 12,4 kVA
voltage / phases 400 / 3 V / ~
Mains frequency 50 Hz
anti-surge fuse 16 AT
Degree of protection (IP)  23 S
feed drive 4 Rollers
connector CEE 16 A
Width 510 mm
Depth 1022 mm
Height 1330 mm
Weight 82 kg

ELMAG AAS1
START UP SERVICE – ELMAG – QUALITY

Competent execution guaranteed

ELMAG® – Start-up Service

Including ELMAG®-Quality Check

  • Depreservation, degreasing and de-securing
  • Assembly until ready for use
  • Oil filling of gearboxes, oil baths and central lubrication systems
  • Testing of electrics, safety components and devices
  • Test run on all shift and power levels
  • 30-minute test run at the highest power level
  • Checking and, if necessary, adjustment of machine tolerances,
  • e.g. V-belt tension and spindle concentricity
  • Testing of all machine functions

For lathes, in addition:

  • Lathe chuck reassembly with marking of minimum tolerance
  • Measurement of the spindle nose to tolerance < 0.01 mm
  • Measurement of the lathe chuck
  • Setting the tailstock parallelism

For MIG/MAG/MMA/WIG welding, plasma cutting &. induction heating equipment (depending on the type of equipment)

  • Assembly of the unit, chassis assembly
  • Intermediate hose assembly
  • Mains plug assembly and gas hose assembly
  • Connection preparation for gas or compressed air
  • Control cable plug Assembly on hose assembly
  • Installation & activation of water cooling unit for modular systems
  • Filling with cooling liquid for liquid-cooled units
  • Short test run or test welding

01.04.2024

COMPRESSED AIR TECHNOLOGY | WELDING TECHNOLOGY | METAL WORKING | STONE CUTTING TECHNOLOGY | WORKSHOP TECHNOLOGY | POWER GENERATORS

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals