SB-BTCC200S BICEP, TRICEP Combo Machine Owner’s Manual

SB-BTCC200S BICEP, TRICEP Combo Machine

Product Information

Product Name:
SB SB-BTCC200S Fitness Equipment BICEP / TRICEP COMBO MACHINE

Product Type: Fitness Equipment

Manual Included:
Owners Manual and Assembly Guide

Product Description, Specs, and Features:

• SB Fitness Equipment / SB-BTC200S

Product Usage Instructions

1. Install guide rods (7) into holes located inside the bottom of the weight stack frame.
2. Slide 2 – #32 spacers on from the top of guide rods to have 2 on each guide rod at the bottom.
3. Install weight plates (29). The smallest weight plate is last as this is the top plate.
4. Install #27 on to guide rod and into the top plate.
5. Install selector rod (28) into weight stack center hole.
6. Secure the top of guide rods to weight stack frame using #9 plate and #17 bolts.
7. Place selector pin (30) into the weight stack.
8. Install left (12) and right (11) weight frame guards and the weight stack frame top cover.
9. Install weight stack cable.

WARNING: The screws at each joint of the weight stack cable must be fully tightened.

PARTS DIAGRAM EXPLODED VIEW

PARTS LIST AND PART NUMBERS

INSTALLATION DETAILS

STEP 1:
ATTACH THE MAIN FRAME ASSEMBLY(1) TO THE WEIGHT STACK FRAME ASSEMBLY(2). INSTALL THE RUBBER FOOT PADS(10) AT THIS TIME(OPTIONAL). INSTALL THE SUPPORTING FRAME ATTACHMENT(6) TO CONNECT THE MAIN FRAME ASSEMBLY AND THE WEIGHT STACK ASSEMBLY.

STEP 2:

1. INSTALL GUIDERODS(7) INTO HOLES LOCATED INSIDE THE BOTTOM OF THE WEIGHT STACK FRAME.
2. SLIDE 2 – #32 SPACERS ON FROM TOP OF GUIDE RODS TO HAVE 2 ON EACH GUIDE ROD AT THE BOTTOM.
3. INSTALL WEIGHT PLATES(29). THE SMALLEST WEIGHT PLATE IS LAST AS THIS IS THE TOP PLATE.
4. INSTALL #27 ON TO GUIDE ROD INTO THE TOP PLATE.
5. INSTALL SELECTOR ROD(28) INTO THE WEIGHT STACK CENTER HOLE.
6. SECURE THE TOP OF GUIDE RODS TO WEIGHT STACK FRAME USING #9 PLATE AND #17 BOLTS.
7. PLACE SELECTOR PIN(30) INTO THE WEIGHT STACK.

REFER TO PAGE 5 FOR THE IMAGE AND REFER TO PAGES 8 & 9 FOR FURTHER ASSISTANCE

STEP 3:
INSTALL ARM PAD TO MOUNTING TUBE ASSEMBLY, BOOM HANDLE ASSEMBLY. AFTER INSTALLING THE CAM(4) AND ADJUSTABLE BICEP/TRICE GRIP HANDLES, INSTALL WEIGHT PLATE CABLE STARTING AT MOUNTING LOCATION ON THE CAM(4).

STEP 4:
INSTALL LEFT(12) AND RIGHT(11) WEIGHT FRAME GUARDS AND THE WEIGHT STACK FRAM TOP COVER.

STEP 5:
INSTALL ELBOW PADS AND SEAT CUSHIONS.

APPENDIX 1:
ORIENTATION DISTINGUISHING METHOD OF COUNTERWEIGHT SHEET

INSTALL WEIGHT STACK CABLE

PRODUCT DESCRIPTION, SPECS, & FEATURES

SB FITNESS EQUIPMENT/SB-BTC200S

• PRODUCT NAME: BICEP/TRICEP COMBO MACHINE
• WEIGHT STACK: 200LB
• PRODUCT FEATURES: BICEP CURLS AND TRICE EXTENSIONS COMBO IN ONE MACHINE
• PRODUCT DIMENSIONS: 45.5″‘ L X 43″ W X 64.5 H
• MUSCLES WORKED: BICEPS, TRICEPS, BRACHIORDIALIS AND FOREARMS.

FOR YOUR SAFETY

1. CONSULT YOUR PHYSICIAN OR HEALTH CARE PROVIDER BEFORE USING YOUR MACHINE AND/OR EXERCISE EQUIPMENT.
2. IF YOU HAVE A PHYSICAL DISABILITY OR AN ATHLETIC DISABILITY, IT IS REQUIRED THAT YOU CONSULT YOUR PHYSICIAN OR HEALTHCARE PROVIDER BEFORE PROCEEDING WITH ANY EXERCISE PROGRAM.
3. BEFORE USING THIS PRODUCT, PLEASE READ THIS MANUAL CAREFULLY. SB FITNESS EQUIPMENT IS NOT RESPONSIBLE FOR ANY PERSONAL INJURY OR DAMAGE CAUSED BY USING THIS PRODUCT UNDER ANY CIRCUMSTANCES OR NEGLIGENCE CAUSED BY THE USER.

ASSEMBLY INSTRUCTIONS AND PROCEDURES

1. THE PURPOSE OF THIS SECTION OF THE USER MANUAL IS TO ENSURE THAT THE MACHINE CAN BE INSTALLED EASILY AND CORRECTLY. PLEASE FOLLOW THE INSTRUCTIONS CAREFULLY AND ENTIRELY.
2. BECAUSE OF ITS LARGE SIZE AND WEIGHT, THE MACHINE SHOULD BE ASSEMBLED NEAR THE LOCATION WHERE IT WILL BE USED.
3. PLACE ALL PARTS OF THE MACHINE IN THE ASSEMBLY AREA AND REMOVE ALL PACKING MATERIAL. DO NOT DISCARD THE PACKAGING MATERIAL UNTIL THE ASSEMBLY IS COMPLETE.
4. ALL BOLTS MUST BE TIGHTENED DURING ASSEMBLY UNLESS OTHERWISE SPECIFIED, AND ALL BOLTS MUST BE TIGHTENED AFTER ASSEMBLY, IN ORDER FOR ASSEMBLY TO BE COMPLETE.
5. WHEN ASSEMBLING THE SB-BTC200S MAKE SURE THAT ALL PARTS ARE ASSEMBLED ACCORDING TO THE ASSEMBLY DIAGRAM.

WARRANTY INFORMATION

WHAT IS COVERED BY SB
SB FITNESS WARRANTS TO THE ORIGINAL PURCHASER OF THIS MACHINE THAT THE FRAME OF THE PRODUCT SHALL BE FREE FROM DEFECT IN MATERIALS AND WORKMANSHIP AND UNDER WARRANTY FOR A PERIOD OF TWO YEARS FROM THE DATE OF PURCHASE. ALL OTHER PARTS AND COMPONENTS OF THE PRODUCT SHALL BE FREE FROM DEFECT IN MATERIAL AND WORKMANSHIP AND UNDER WARRANTY FOR A PERIOD OF ONE YEAR FROM THE DATE OF PURCHASE WHEN THE PRODUCT IS USED AS RECOMMENDED BY SB FITNESS UNDER NORMAL USES AND CONDITIONS. DURING THE WARRANTY PERIOD SB FITNESS WILL AT NO ADDITIONAL CHARGE TO YOU, REPAIR OR REPLACE (AT SB FITNESS’ OPTION) THE FRAME OR ANY PART OF THE PRODUCT IF IT BECOMES DEFECTIVE, MALFUNCTIONS, OR OTHERWISE FAILS TO CONFORM WITH THIS LIMITED WARRANTY. ALL LABOR SHALL BE THE RESPONSIBILITY OF THE OWNER.

WHAT IS NOT COVERED
THIS LIMITED WARRANTY APPLIES ONLY TO PRODUCTS SOLD IN THE UNITED STATES UNDER THE SB FITNESS BRAND NAME. THIS WARRANTY DOES NOT COVER NORMAL WEAR AND TEAR ON ITEMS SUCH AS. BUT NOT LIMITED TO, TRANSPORTATION WHEELS, FOOT PEDALS, AND RUBBER GRIPS. PLASTIC END CAPS.

SCRATCHED PARTS, BROKEN
COVERS, COSMETIC DAMAGE, AND EXCLUDES PAINT & FINISH. WEAR ITEMS PERTAIN TO COMPONENTS THAT MIGHT NEED TO BE REPLACED DUE TO WEAR AND TEAR RESULTING FROM NORMAL USAGE. THIS WARRANTY IS VOID IF THE PRODUCT IS IMPROPERLY STORED, OR ASSEMBLED. ALTERED AND/OR MODIFIED IN ANY WAY. MISUSED. ABUSED, IS SUBJECT TO ACCIDENT, IS IMPROPERLY MAINTAINED, AND THIS WARRANTY DOES NOT COVER REPAIR FOR ANY NOISES SUCH AS SQUEAKS. CLUNKS, AND THUMPS RESULTING FROM POOR OR LACK OF PREVENTIVE MAINTENANCE. THIS LIMITED WARRANTY DOES EXTEND TO ANY PRODUCT THAT IS DAMAGED OR RENDERED DEFECTIVE;(A) AS A RESULT OF ACCIDENT OR MISUSE. OR ABUSE:(B) USE WITH THE PRODUCT OF ANY PART NOT MANUFACTURED OR SOLD BY SB FITNESS; (C) BY MODIFICATION OF THE PRODUCT; (D) BY NORMAL WEAR AND TEAR: (E) OPERATION USING INCORRECT PO WER SUPPLIES; OR (F) AS A RESULT OF SERVICE BY ANYONE OTHER THAN SB FITNESS. OR AN AUTHORIZED SB FITNESS SERVICE PROVIDER.

ASSUMPTION OF RISK

WARNING
THIS PRODUCT HAS BEEN MANUFACTURED WITH SAFETY IN MIND. WARRANTY APPLIES ONLY WHEN USED AS INSTRUCTED. FAILURE TO COMPLY WITH THE WARNINGS AND PRECAUTIONS DESCRIBED IN THIS DOCUMENT MAY CAUSE PERSONAL INJURY AND RESULT IN THE WARRANTY BEING VOIDED. PLEASE NOTE THAT SB FITNESS ASSUMES NO RESPONSIBILITY FOR ANY ACCIDENTS RESULTING FROM USE.

CALIFORNIA PROPOSITION

65 WARNING
WARNING:
THIS PRODUCT CAN EXPOSE YOU TO CHEMICALS INCLUDING ARSENIC, WHICH IS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER. FOR MORE INFORMATION, GO TO WWW.P65WARNINGS.CA.GOV.XN–IVG.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>