DRAGONTOUCH Modern 15 Digital Photo Frame User Manual

MODERN 15
DIGITAL PHOTO FRAME USER MANUAL

Welcome to Dragon Touch!

Dragon Touch digital frame is designed to collect & display thousands of your photos privately and safely. It’s easy to get connected with all your loved ones around the world. This manual will provide details you need to set up your frame, invite families and friends to share photos with your new Dragon Touch frame. Let’s get started!

GETTING STARTED

1. Plug in your frame
   Connect the socket to the back of the photo frame, then plug it into a power source. The frame will power on in seconds. You can place the frame either in landscape or portrait mode (we recommend you place it in landscape mode during the first setup).

2. Initial Settings
   There are several initial settings including Language, Wifi, Nickname, City, Timezone etc. when you enter the system for the first time.

3. Connect to Wifi
   You can connect to Wifi during the initial settings or under the Wifi setting. Tap the Settings icon to enter the settings page, locate Wifi and tap on it to connect Wifi. Select the Wifi network you would like to connect and enter the password for connection. If your Wifi network is not on the list, move your frame closer to your router, wait for seconds and check it again.

Note:

1. The photo frame supports 2.4GHz / 5GHz Wifi networks.
2. A private Wifi network is highly recommended.

REMOTE CONTROL

1. POWER — Switch On/Off
2. Mute — Press the Mute button to silence the voice temporarily.
3. — Up key
4. — Left key
5. — Right key
6. — Press to confirm. Play/pause: In Playback mode, press this button, it will pause. Repress this button, it will play again.
7. — Down key
8. — Turn down the volume.
9. — Turn up the volume.
10. — Return to the upper page.
11. — Go to the photo gallery interface.
12. — Go to the home screen.
13. — Go directly to Setup mode.

Note:

1. Please make sure you have removed the plastic insulation sheet before using the remote control.
2. The remote control is already paired successfully.

If it’s lost or broken accidentally, you have to pair a new remote control with the digital picture frame by following the steps below:

1. Make sure the digital picture frame is turned on.
2. Press the  ➆  and ⑪ keys at the same time for about 3~5 seconds to complete the pairing.

UPLOADING PHOTOS AND VIDEOS TO THE FRAME

1. Upload Photos and Videos Via VPHOTO App
   1.1 Download the VPhoto App
   Please download and install the VPhoto app on your mobile device by searching VPhoto in the App Store or Google Play Or scanning the QR code below.|
   ---|---
   https://play.google.com/store/apps/details?id=com.waophoto.smartphoto| https://apps.apple.com/app/id1515858126

1.2 Create an Account
Open the VPhoto app, then set your user name and your profile photo.
1.3 Pair Your Frame via the App
You will be required to enter the connection code or scan the QR code of your frame.
You can tap the Settings icon to enter your frame’s settings page, and locate “My Frame” to view the Connection code. Once the process is completed, you will see a pop -up message “Bind success”.
Note:
➀ Connection Code is a 9-digit serial number which can be found in your frame, device main interface→Settings→My frame.
➁ The Connection code and QR code will refresh every 12 hours.
➂ Before you view the connection code and QR code, please make sure your frame is connected to Wifi, otherwise, the connection code and QR code will not load out. 1.4 Upload Photos and Videos to Your Frame
After connecting the App to your frame, you can start adding photos and videos to your frame anywhere and anytime in the following two ways:
(1) Select the photos or videos from your phone’s album to upload, and choose the frame you would like to send them to. Tap the Next Step, you can write captions for each photo and choose the frame you want to send. Tap the right arrow icon to confirm.
Warm tip:
➀ To add captions for photos, you can tap on the photo and add descriptions when uploading.
➁ You can’t modify the title after uploading the photo to the frame.
(2) Tap the Camera icon to take new photos or videos, and choose the frame you would to send them to. Tap the right arrow icon to confirm. The photo frame will receive the photos or videos in seconds, you can check them on the frame’s photo or video library.
Note:
➀ If the frame didn’t receive the photos or videos, please reboot the product or check the Wifi network.
➁ Each video clip is limited to 200MB.
➂ Videos can only be uploaded individually. 1.5 Invite Your Families & Friends to Connect to Your Frame
Your families and friends can share their happy moments to your frame by following the steps below:
➀ Download and install the Vphoto app.
➁ Open the app, then set user name and profile photo.
➂ Get the connection code shared by you to connect to your frame. Please make sure your connection code is valid.
➃ Start sending the photos and videos to your frame.
Here are two ways to share your connection code:

1. Take a picture of the connection code on the frame, then share it with your families or friends.
2. Open your VPhoto App, tap the More icon in the upper left corner and choose Connected Device, select the frame you want your friend to connect, then tap the Share icon. You will receive a picture of the QR code and Connection code. Send the picture to your families or friends.
   Note:
   ➀ Connection Code is a 9-digit serial number which can be found in your frame, device main interface→Settings→My frame.
   ➁ The Connection code and QR code will refresh every 12 hours.
   ➂ Before you view the connection code and QR code, please make sure your frame is connected to Wifi, otherwise, the connection code and QR code will not load out.

2. Upload Photos and Videos Via Email
   You and your friends can also send photos and videos to the frame via your Email.
   2.1 Connect Your Email Address to the Frame via Two Methods
   Tap the “+” in “User Management”, then add mailboxes. You will receive an email to inform your binding request is completed and the way to send photos and videos to the frame. 2.2 Upload Photos and Videos to Your Frame
   After adding your email address to the frame, you can email photos and videos to the mailbox of the frame.
   Your photos and videos will be received in minutes. You can check them on the frame’s photo or video library. Each video clip is limited to 200MB.

3. Upload Photos and Videos Via USB Drive/ TF Card
   The frame can also support adding photos and videos via some external drives, such as USB drive and TF Card.
   (1) Insert a USB drive or a TF card into the frame, and wait for seconds, the frame will notify you when successfully connected.
   (2) Enter the Photo or Video library, and tap USB or TF Card, you will see all the photos or videos stored in the USB drive or the TF card.
   (3) Tap the More icon in the upper right corner, select the photos or videos you would like to copy to the internal memory of the frame.
   (4) Tap the Copy icon on the top then choose OK to import the photos or videos.
   (5) Your photos or videos will be reserved in Internal Storage in seconds. You can check them on the frame’s photo or video library.
   Note:
   ➀ Max support a 64GB TF Card.
   ➁ Please remove all your external devices when you reset the photo frame.
   ➂ If you have too many files stored in the card, it will take more time to read.
   ➃ Not all models support external drive. Please prevail in kind.
   ➄ USB drive or TF Card supports the FAT32 format only.

4. Upload Photos and Videos Via Computer
   If you would like to upload large files to the frame, you can connect your computer to the frame via a Type-C cable for transmission. You can transfer photos and videos from your computer to the frame in large quantities.
   (1) Connect your computer to the frame with a Type-C cable. Please keep the frame turned on.
   (2) Find your frame disk named after the frame’s model number in your computer.
   (3) Add media files that you would like to play on your frame to the exact sub- folder in your frame disk. (Pictures to the Pictures folder, and videos to the Movies folder, etc.)
   (4) In your frame, the photos and videos you upload from your computer will be stored in the library’s Internal Storage.

5. Upload Music Via USB Drive/ TF Card
   The frame can also support uploading music via external drive, such as USB drive and TF cards.
   (1) Insert a USB drive or a TF card into the frame, and wait for seconds, the frame will notify you when successfully connected.
   (2) Enter the Music, and tap USB or TF card, you will see all the music stored in the USB drive or the TF card.
   (3) Tap the More icon in the upper right corner, select the music you would like to copy to the internal memory of the frame.
   (4) Tap the Copy icon on the top then choose OK to import the music.
   (5) Your music will be reserved in Internal Storage in seconds. You can check them on the frame’s music library.

6. Upload Music Via Computer
   (1) Connect your computer to the frame with a Type-C cable. Please keep the frame turned on.
   (2) Find your frame disk named after the frame’s model number in your computer.
   (3) Add media files that you would like to play on your frame to the exact sub- folder in your frame disk.
   (4) In your frame, the music you upload from your computer will be stored in the music library’s Interal Storage.

KEY FEATURES

1. Picture Slideshow
   Tap any photos in the upper left corner on Homepage to enter the photo library.
   You will find options including All, Internal Storage, TF Card, USB, Folder, Favorites and user list. You can check all photos of each playlist and operate in batch.
   • “All” includes photos in the internal storage and external devices. The default playlist is “All”. You also can choose photos in the Internal Storage to start slideshow.
   • “Internal Storage” includes photos sent from the app, email, or copied from external devices.
   • “TF Card” / ”USB” shows photos in external drives like USB drive or TF cards.
   To add pictures to “Internal Storage” from “TF Card” / “USB”, you can tap “┇” at the upper right corner, choose the photos you want to add to “Internal Storage”, then tap “ ”  and “OK” to confirm the process.
   • “Folder” allows you to create folders and name them. Only pictures in “Internal Storage” can be added. Note:
   ➀ Only pictures in “Internal Storage” can be added into folders and to Favorites.
   ➁ To delete some pictures, we highly recommend to operate in “Internal Storage” instead of “ALL”; Or please remove external device while deleting so as to avoid deleting files in “USB” or “TF Card” by mistake.
   ➂ Not all models support external drive. Please prevail in kind.
   During the slideshow, you will have more tools to customize the slideshow simply by touching the screen. There will be an operation column on the bottom.
   The contents are as follows: Rotate, Full screen display, Pause, Delete, Zoom in, Setting, Information, Add to favorites, Slit screen display.
   You can tap “ ♡ ” to add the picture to your “Favorites” and set multi-display for fun. You can adjust the slideshow transition effect and slideshow interval. You can also pause the slideshow to keep showing the current photo.

2. Video Slideshow
   Tap “Video” on Homepage to enter the video library, then select the video you want to play.
   Note: Video Clip shared from the app and email will show in the video library.

MULTIPLE FUNCTIONS

Music
Tap Music on Homepage to enter the music library, then select the music you want to play.
Weather Forecast
Choose “Weather” on homepage, you can check the weather of three days. Both [ ℃ ] and [ ℉ ] are available. You can switch to the temperature format you want to use. By tapping “+” in the upper left corner to add several cities, you can know the weather of the city you add.
Clock
Choose “Clock”, you can choose the clock skin you like to present the time.
Steps: After entering the clock interface, double-click the screen.
Alarm
Choose “Alarm” to set up alarm clock. Tap “Add” to add new alarm clock and tap “Edit” to adjust the set time and delete the alarm clock you choose.

GENERAL SETTINGS

[My Frame] shows your frame connection code and user management.

• The Connection code and QR code will refresh every 12 hours. You can also refresh the code manually by tapping .

• To nickname your frame, you can tap the frame name in the upper right corner to edit; it will show on the app after you connect it to the frame.

• To send photos and videos to your frame via email, you can simply tap ” ＋ ” at ” User Management” to add the email address. Please refer to “Upload Photos or Videos Via Email” for more details.
  Please refer to “UPLOADING PHOTOS VIA EMAIL” for more details.

• “Users” allows you to manage the connected account of the frame. Tap the account name, you can views photos, remark names, delete users, or delete both users and photos.

[Album Settings]

• Motion Sensor
  Motion sensor will automatically turn off the screen when you’re not in the room to save energy.

• Brightness
  Adjust the brightness of the screen.

• Sound
  Adjust the media volume.

• Touch Sounds
  Choose to turn the sound on or off when touching the screen.

• Assistive Touch
  When Assistive Touch is enabled, the assistive touch will appear on the screen. It is a quick navigation key that helps you easily go to Homepage and adjust the volume.

• Language
  English
  Set the system language.

• Slideshow
  Set Slideshow time to make the frame automatically display photos after a period time of inactivity.
  For example: when you set it to 5 seconds, the screen will automatically switch to the slideshow if there is no operation within 5 seconds.

• Slideshow Mode
  Choose either Sequential or Random mode to display photos.
  Sort by
  Choose the pictures to be sorted by time or name.

• Caption
  When Caption is enabled, the captions you write will be displayed on the photo.

• Date and Time
  Set the date and time according to your preference. You can select time zone and use network-provided time.

• Sleep
  Set the Auto-On / Off time to make the display automatically turn on and off at a specific time.

• Auto-rotate Screen
  When Auto-rotate screen is enabled, you can place the frame in portrait and landscape.
  The frame will adjust the picture automatically.

• Notification Sounds
  Choose whether you want to be notified about new messages with sounds or not.

[Wifi] Select the Wifi you want you frame to connect to.

[Factory data reset]

1. Tap Factory data reset to reset your frame. Here are two ways to reset:

1. Choose “Delete all users and restore the device to inactive”, device files will be reset and all boundusers will be unbound.
2. If you do not choose this option, only device files will be back to default settings and bound users remain.

2. Tap OK to reset your frame.

[Help] Simple guide for you to share your pictures.
[About]
Tap “About” to check your frame’s version, frame ID, serial number, etc. The frame version is of great help to troubleshooting. When you’re asked to provide the frame version, you may find it here.

TECHNICAL SPECIFICATION

• Adapter: Input 100-240V 50/60HZ
• Picture Format: BMP, JPG, GIF, PNG
• Audio Format: Mp3, WMA, OGG, AAC, APE, FLAC, WAV
• Video Format: MPEG1, MPEG2, MPEG4, Xvid, AVI, M-JPEG, H.264, MOV, VOB , MKV, DIVX4, DIVX5, DIVX33GP
• External support: Max 64GB USB drive / TF Card
• Support 2.4GHz/5GHz Wifi network

TROUBLESHOOTING

1. Does the frame have to be plugged in all the time?
   This frame needs to be plugged into a DC outlet all the time.

2. Why can’t this frame connect to Wifi?
   It supports 2.4GHz / 5GHz Wifi networks, select the Wifi network you would like to connect to and enter the password correctly if required. If your Wifi network is not on the list, restart your frame or move it closer to your router, wait for seconds and  check it again.

3. Does this frame need to connect to Wifi to work or just in the setup process?
   This frame needs to connect to a Wifi network for setup, receiving new photos or videos, user requests and for software updates. Otherwise, the frame can just play photos or video without a Wifi connection.

4. Why is there no sound from the frame?
   Please check if the volume is turned down to 0 and if the player is in Mute mode.

5. Can I share photos and videos to the frame?
   Yes, you can share both photos and videos (up to 200MB) to the frame.

6. Can I cycle pictures and videos together?
   You could only play photos or videos separately.

7. Can this frame automatically turn on/off at a specific time?
   You can go to the Sleep setting and set the auto on / off time as you want.

8. Why are there no files after sharing videos or pictures to cloud server?
   Please check if the upload process is completed.

9. Why can’t this frame play the file?
   Please confirm if the file format is compatible with the frame.

10. Can I change the image transitions and display speed?
    Yes, the speed can be adjusted in the bottom column when the picture is displaying.

CONTACT US

888-811-1140 (US)
cs@dragontouch.com
www.dragontouch.com
For any inquiries about Dragon Touch products, please feel free to contact us. We will respond within 24 hours.

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

Please read this manual before operating your digital photo frame, and keep it for future reference.

References

• Dragon Touch Android Tablet PC, 4k Action Camera & Sports DV Camera at Dragon Touch

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>