Bridgetek EW2022 HVT Junction User Guide
- June 12, 2024
- Bridgetek
Table of Contents
Bridgetek EW2022 HVT Junction User Guide
Setup Instructions
The LDSBus HVT-Junction connects LDSBus Devices (Sensors / Actuators) to the LDSBus. Each junction can connect up to four LDSBus Devices and additional LDSBus HVT-Junctions may be daisy chained to add more LDSBus Devices to the LDS Bus.
Step 1:
Connect the first LDSBus HVT-Junction to any of the LDSBus Host Systems using
an RJ45 (CAT5e) cable.
Step 2:
Connect the configured LDSBus Device(s) to the LDSBus HVTJunction as shown
Step 3:
If there is more than one LDSBus HVT-Junction in the system, chain them
together as shown.
Connection to LDSBus Devices (Sensors/Actuators)
Note: Enable termination for last LDSBus Device in the bus
Setup Instructions:
The LDSBus HVT-Junction connects LDSBus Devices (Sensors / Actuators) to the LDSBus. Each junction can connect up to four LDSBus Devices and additional LDSBus HVT-Junctions may be daisy chained to add more LDSBus Devices to the LDS Bus.
Step 1:
Connect the first LDSBus HVT-Junction to any of the LDSBusHost Systems using
an RJ45 cable (CAT5e) cable.
Step 2:
Connect the configured LDSBus Device(s) to the LDSBus HVTJunction as shown
Step 3:
If there is more than one LDSBus HVT-Junction in the system, chain them
together as shown.
Connection to LDSBus Devices (Sensors/Actuators)
Note: Enable termination for last LDSBus Device in the bus
Please scan QR code A or visithttp://bit.ly/system-warranty for warranty registration using the UUID and Product Key.
View the full information on the LDSBus HVTJunction, application setup and
installation at http://bit.ly/ldsbus-resources or scan QR Code B.
Documents / Resources
|
Bridgetek EW2022 HVT
Junction
[pdf] User Guide
EW2022 HVT Junction, EW2022, HVT Junction, Junction
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>