PHILIPS EGP472 220 Line Base Largest Platform Instruction Manual
- June 1, 2024
- Philips
Table of Contents
PHILIPS EGP472 220 Line Base Largest Platform
Specifications:
- Accessory color: Aluminum
- CE mark: Yes
- Input Voltage: 220 to 240 V
- Line Frequency: 50 or 60 Hz
- Overall length: 230 mm
- Overall width: 69 mm
- Overall height: 45 mm
- Dimensions (Height x Width x Depth): 45 x 69 x 230 mm
- Material: Aluminum
- Ingress protection code: IP67 [Dust penetration-protected, watertight]
- Protection class IEC: Safety class I
Product Usage Instructions
- Ensure the input voltage is within the range of 220 to 240 V and the line frequency is either 50 or 60 Hz.
- Install the LineBase securely in the desired location using appropriate mounting hardware.
- Make sure to follow all safety guidelines provided in the manual during installation and operation.
- In case of any issues or uncertainties, refer to the datasheet for detailed information.
EGP472 220/60W 2/3 180W
LineBase, Aluminum
LineBase is breakthrough lighting for the city tunnel, underpass. It’s a
really and amazingly linear lighting yet easy to install, and it’s the ideal
solution to replace fluorescent lighting. The customized lumen output of
LineBase enables lighting designers to have freedom on lighting layout. Its
continous installalation is to create a seamless, brighter, comfortable visual
effect with less flicker. Its plug-and-play electrical connection and remote
waterproof drivers save total cost of owner. The products pass kinds of safety
and durability test to prove a long lifespan on its operation.
Warnings and Safety
- Strongly recommended to use surge protection device in electricity cabinet to wire luminaires
Product data
General Information
- Accessory color Aluminum
- CE mark CE mark
Operating and Electrical
- Input Voltage 220 to 240 V
- Line Frequency 50 or 60 Hz
Mechanical and Housing
- Overall length 230 mm
- Overall width 69 mm
- Overall height 45 mm
- Dimensions (Height x Width x Depth) 45 x 69 x 230 mm
- Material Aluminum
Approval and Application
- Ingress protection code IP67 [Dust penetration-protected, watertight]
- Protection class IEC Safety class I
Product Data
- Order product name EGP472 220/60W 2/3 180W
- Full product name EGP472 220/60W 2/3 180W
- Full product code 911401682105
- Order code 911401682105
- Material Nr. (12NC) 911401682105
- Numerator – Quantity Per Pack 1
- Numerator – Packs per outer box 2
Frequently Asked Questions (FAQ)
What is the Ingress protection code for the LineBase?
The Ingress protection code for LineBase is IP67, which means it is dust penetration-protected and watertight.
What is the recommended input voltage for LineBase?
The recommended input voltage for LineBase is in the range of 220 to 240 V.
How many packs are included per outer box of LineBase?
Each outer box of LineBase contains 2 packs.
© 2024 Signify Holding All rights reserved. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.
www.lighting.philips.com
2024, March 18 – data subject to change
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>