ELMAG 88112 Universal Turning and Milling Combination Instruction Manual
- June 1, 2024
- ELMAG
Table of Contents
ELMAG 88112 Universal Turning and Milling Combination
Product Information
Specifications:
- Tip width: 700 mm
- Tip height: 140 mm
- Turning diameter over bed: 280 mm
- Turning diameter over carriage: 165 mm
- Machine bed width: 180 mm
- Cross slide way: 140 mm
- Top slide way: 70 mm
- Turning chisel cross-section, max.: 12×12 mm
- Mandrel holding fixture (screw mandrel): MK 4
- Spindle bore: 26 mm
- Rotational speed 1, stepless (Superturn): 50 – 1250 rpm
- Rotational speed 2, stepless (Superturn): 100 – 2500 rpm
Product Usage Instructions
Setup and Assembly:
Ensure all components are unpacked and in good condition. Follow the assembly
instructions provided in the user manual to set up the universal turning and
milling combination.
Power Connection:
Connect the machine to a suitable power source as per the electrical
requirements mentioned in the user manual. Ensure proper grounding for safety.
Operating the Universal Lathe:
Adjust the speed settings as needed using the stepless rotational speed
controls. Refer to the user manual for specific instructions on turning
operations.
Using the Milling and Drilling Unit:
Attach the MFB 20 Vario unit to the universal lathe for milling, boring, and
drilling operations. Follow safety guidelines and tool instructions for
precise machining.
FAQ:
Q: How do I change the rotational speed on the Superturn machine?
A: To adjust the rotational speed on the Superturn machine, use the
stepless control knobs provided on the machine. Refer to the user manual for
detailed instructions.
Q: Can I use accessories from other brands with this universal turning
and milling combination?
A: It is recommended to use accessories specifically designed for this
product to ensure compatibility and safe operation. Using accessories from
other brands may void warranty or cause damage.
consisting of:
1 pc. Universal lathe
Art. No. 88112
1 pc. milling and drilling unit
MFB 20 Vario
Art. No. 88116
Article Number: 88114
EAN Code: 9004853881145
TECHNICAL FACTS
PRODUCT HIGHLIGHTS
Superturn + MFB 20 Vario – Set-
Universal turning machine SUPERTURN 700/140 Vario – Milling, boring and
drilling unit MFB 20 Vario
Standard features
Digital speed
display – Three-jaw lathe chuck Ø 125 mm, centre
- Centre point MK 4
- Centre point MK 2
- Emergency stop button / Zero voltage release – Lathe chuck protection with safety switch
- Chip trough / Splash board – Tool box / Operating instructions / CE
- Quick clamping drill chuck B 16 / 1 – 16 mm
- Taper mandrel MK 2 / B 16 with IG M10
- Pull spindle M10
Special accessories
- Four-jaw lathe chuck Ø 125 mm, individual clamping
- Flange Ø 125 mm for SUPERTURN 700/140 Vario
- Face plate Ø 240 mm for SUPERTURN 700/140 Vario
- Revolving centre MK 2
- Travelling rest for SUPERTURN 700/140 Vario
- Fixed rest for SUPERTURN 700/140 Vario
- Quick-change steel holder set MA, 5 piece
- Turning steel set 12 x 12 mm ISO, 5-piece
- Turning steel set 12 x 12 mm ISO, 11-piece
- Indexable insert turning set 12 x 12 mm, 7-piece
- Indexable insert set, 7-piece for turning set 12 x 12 mm
- “Camlock” turning tool set 12 x 12 mm, 7-piece
- SUPERTURN 700/140 Vario subframe
- Base plate for MFB 20 Vario with XY table
- Titanium milling set, 20 piece, Ø 3 – 20 mm
- Machine vice 3” / 75 mm – Collet set MK 2 (ER 25), 10-piece, 2 – 16 mm
- Collet set MK 2 (ER40), 15-piece, 2-26 mm
SPECIFICATIONS
Tip width | 700 mm |
---|---|
Tip height | 140 mm |
turning diameter over bed | 280 mm |
turning diameter over carriage | 165 mm |
machine bed width | 180 mm |
cross slide way | 140 mm |
top slide way | 70 mm |
turning chisel cross-section, max. | 12×12 mm |
mandrel holding fixture (screw mandrel) | MK 4 |
spindle bore | 26 mm |
rotational speed 1, stepless (Superturn) | 50 – 1250 rpm |
rotational speed 2, stepless (Superturn) | 100 – 2500 rpm |
longitudinal feed | 0.07 – 0.20 mm/rev |
--- | --- |
Thread size metric (M..) | 0.4 – 3.5 mm |
inch thread, gears G | Aug-56 G/’ |
sleeve holding fixture | MK 2 |
quill diameter | 30 mm |
spindle stroke | 80 mm |
engine power (Superturn) | 1000 W |
voltage (Superturn) | 230/50 V/Hz |
Length | 1400 mm |
Width | 700 mm |
Height | 600 mm |
weight (Superturn) | 190 kg |
drilling capacity in steel | 20 mm |
thread cutting performance | M14 |
face mills milling capacity | 63 mm |
end mills milling capacity | 16 mm |
mandrel holding fixture (milling spindle) | MK 2 |
mandrel radius | 184 mm |
quill stroke | 50 mm |
milling head stroke | 380 mm |
milling head swivel range | ± 90 ° |
rotational speed 1, stepless (MFB) | 50 – 1125 rpm |
rotational speed 2, stepless (MFB) | 100 – 2250 rpm |
engine power (MFB) | 600 W |
voltage (MFB) | 230/50 V/Hz |
height from machine bed | 830 mm |
weight (MFB) | 60 kg |
UNIVERSAL TURNING AND MILLING COMBINATION SUPERTURN 700/140 VARIO
ELMAG® – Start-up Service
Including ELMAG®-Quality Check
- Depreservation, degreasing and de-securing
- Assembly until ready for use
- Oil filling of gearboxes, oil baths and central lubrication systems
- Testing of electrics, safety components and devices
- Test run on all shift and power levels
- 30-minute test run at the highest power level
- Checking and, if necessary, adjustment of machine tolerances,
- e.g. V-belt tension and spindle concentricity
- Testing of all machine functions
For lathes, in addition:
- Lathe chuck reassembly with marking of minimum tolerance
- Measurement of the spindle nose to tolerance < 0.01 mm
- Measurement of the lathe chuck
Setting the tailstock parallelism
For MIG/MAG/MMA/WIG welding, plasma cutting & induction heating equipment
(depending on the type of equipment)
- Assembly of the unit, chassis assembly
- Intermediate hose assembly
- Mains plug assembly and gas hose assembly
- Connection preparation for gas or compressed air
- Control cable plug Assembly on hose assembly
- Installation & activation of water cooling unit for modular systems
- Filling with cooling liquid for liquid-cooled units
- Short test run or test welding
Competent execution guaranteed
COMPRESSED AIR TECHNOLOGY
WELDING TECHNOLOGY
METALWORKING STONE
CUTTING TECHNOLOGY
WORKSHOP TECHNOLOGY
POWER GENERATORS