TOURATECH KTM 890 Headlight Guard Kit Instructions
- June 1, 2024
- Touratech
Table of Contents
TOURATECH KTM 890 Headlight Guard Kit
We recommend having the accessory parts fitted by a specialist workshop.
Symbols
- Caution
- Note
- Warning
- Liquid
- Torque
- Template
- 2 Person
- Original motorcycle part
USING INSTRUCTION
- These instructions are written based on our current state of knowledge. Information is provided without any guarantee as to its accuracy. Subject to technical modifications.
- The order of assembly steps must be followed.
- Touratech accepts no liability for incorrectly fitted parts and resulting material damage or personal injury!
- Please observe applicable road vehicle (construction and use) regulations, EC/ECE Directives, and relevant laws in your country.
- If parts are fitted that require inspection and approval after fitting, take your vehicle to a testing station immediately and have the vehicle papers updated.
- Check and if necessary tighten all bolted connections after 50 km.
- Standard tightening torques in Nm for bolted connections with strength class 8.8.
- For special tightening torques refer to your specialist workshop!
- Please take into account that fitting panniers, crash bars, foot peg lowering kits (rider and pillion), Kickstand enlargement plates, front spoilers, and engine guards may restrict the bike’s lean angle!
- If modifications are made to the fairing, stem, handlebar, fairing parts, etc., ensure that electrical wiring, brake lines, accelerator, and clutch cables are refitted correctly. Check clearance, on both sides with a full steering lock.
- Always disconnect the battery when working on the electrics!
- We recommend cutting the protective film to size and applying it to impact areas that are likely to be chipped by stones.
- Work on the brake system and suspension should always be carried out by a specialist workshop.
- The maximum load on luggage racks is 5 kg! Luggage racks ZegaPro TC is 10 kg!
- If other original accessories or aftermarket accessories are used, ensure clearance, and fitment and do not come into contact with other parts!
- Apply conventional lubricant to stainless steel bolts before assembly.
- PDF fitting instructions also can be downloaded from the Touratech website.
Mounting instructions
OFFROAD USE ONLY
Documents / Resources
|
TOURATECH KTM 890 Headlight Guard
Kit
[pdf] Instructions
KTM 890 Headlight Guard Kit, KTM 890, KTM 890 Guard Kit, Headlight Guard Kit,
Guard Kit, Headlight
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>