TOURATECH 09-048-5884-0 Shock Absorber Instruction Manual
- October 30, 2023
- Touratech
Table of Contents
09-048-5884-0 Shock Absorber
We recommend having the accessory parts fitted by a specialist workshop.
Caution/Attention
Note
Warning
Liquid
Torque
Template
2 Persons
Original motorcycle part
These instructions are written based on our current state of knowledge.
Information is provided without any guarantee as to its accuracy. Subject to
technical modifications. The order of assembly steps must be followed.
Touratech accepts no liability for incorrectly fitted parts and resulting
material damage or personal injury! Please observe applicable road vehicle
(construction and use) regulations as well as EC/ECE Directives and applicable
laws in your country. If parts are fitted which require inspection and/or
approval after fitting, take your vehicle to a testing station immediately and
have the vehicle papers updated. Check and if necessary tighten all bolted
connections after 50 km. Standard tightening torques in Nm for bolted
connections with strength class 8.8. For special tightening torques refer to
your specialist workshop! Please take into account that fitting panniers,
crash bars, foot peg lowering kits (rider and pillion),Kickstand
enlargmentplate, front spoilers and engine guards may restrict the bike’s lean
angle! If modifications are made to the fairing, stem, handlebar, fairing
parts, etc., ensure that electrical wiring, brake lines, accelerator and
clutch cables are refitted correctly. Check clearance, both sides with full
steering lock . Always disconnect the battery when working on the electrics!
We recommend cutting protective film to size and applying it to impact areas
that are likely to be chipped by stones. Work on the brake system and
suspension should always be carried out by a specialist workshop.
The maximum load on luggage racks is 5 kg! Luggage racks Zega Pro TC is 10 kg!
If other original accessories or aftermarket accessories are used, ensure
clearance, fitment and do not come into contact with other parts!
Apply conventional lubricant to stainless steel bolts prior to assembly.
PDF titting instructions also can be downloaded from the Touratech webshop.
Mounting instructions
01-048-5884-0 Touratech Suspension Tieferlegung (-S0mm) fur BMW F800GS /
F800GS Adventure ab 2013 Typ Level2
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>