MEMPHIS VG0002S Grills Elite Wood Fire Pellet Smoker Grill Owner’s Manual
- June 4, 2024
- MEMPHIS
Table of Contents
VG0002S Grills Elite Wood Fire Pellet Smoker Grill
Owner’s Manual Memphis Elite Cart ITC 3
IntelliBurn TechnologyTM
Model Number VG0002S
| Clearance to Combustibles | 2 |
|---|---|
| Grill Dimensions | 3 |
| Memphis Controller Diagram | 4 |
| Memphis Component Diagram | 5 |
| Memphis Fuse Diagram | 6 |
Read all instructions before installing and using this appliance Save these instructions for future reference
Clearance to Combustible Materials
YOUR MEMPHIS GRILL MUST MAINTAIN THE SPECIFIED CLEARANCE TO COMBUSTIBLE
MATERIALS WHILE OPERATING THE GRILL OR WHILE THE GRILL IS HOT! Combustible
Material is wood, drywall, siding, or any other material that has to ability
to catch fire.
Below are some guidelines to
ensure the safe operation of your Memphis Grill
- The grill is to be supported by the casters provided.
- Grill casters are to be locked while the grill is in use or while the grill is hot.
- It is recommended that the grill be placed on a non-combustible surface.
- Operating the grill under a combustible ceiling or overhang is NOT recommended.
- Maintain the minimum clearance to combustible materials specified above.
The major cause of fires is failure to maintain required clearances (air spaces) to combustible materials. It is of the utmost importance that this product is installed only in accordance with these instructions.
Grill Dimensions
Other Grill Information
Main Grate Area— 37.1 in X 17.4 in. Top Grate Area— 37.1 in. X 5.5 in
[94.3 cm X 44cm] [94.3 cm X 14 cm] Optional Middle Grate Kit Area— 37.1 in. X
11 in [94.3 cm X 28 cm] Grill Height with Hood Open— 66.2 in. [168 cm] Grill
Width with Slides Shelves Open— 91.9 in. [233 cm] 644 in. sq. 204 in. sq. 408
in. sq.
[4,149 cm sq.] [1,320 cm sq.] [2,640 cm sq.]
Memphis Controller Diagram
| Part # | Name | Description |
|---|---|---|
| VG1966 | Auger Wiring Harness | 5-pin connector from the auger motor to the |
logic board
VG1967| Blower Wiring Harness| 4-pin connector from the blower to the logic
board
VG1968| Display Wiring Harness| 9-pin connector from the LCD display to the
logic board
VG1969(E)| US Power Cable (Euro)| The power cable that plugs into 120VAC (US)
or 240VAC (EU) wall outlet
VG1970| 10 Wiring Harness| 8-pin connector from 10 board to the logic board
VG1971| Probe Jack Wiring Harness| 2-pin connector from meat probe jack to the
10 board
VG1972| Push Button Wiring Harness| 4-pin connector from the push button in
the Display Housing to the 10 board
VG1973| 5V Wiring Harness| 5-pin connector from the power supply board to the
logic board
VG1975| Igniter Wiring Harness| 2-pin connector from the igniter to the logic
board
VG1976| Auxiliary Fan Wiring Harness| 2-pin connector from Aux fan to the
logic board
VG1977| RTD Wiring Harness| 2 Pin connector from RTD to the logic board.
Connection to the board is non-polarized
VG1978| 24V Wiring Harness| 2-pin connector from the power supply to the logic
board. Provides power to the blower, aux fan, auger motor, cook lights, and
LCD
VG1979| Cook Light Wiring Harness| 2-pin connector from cook lights to the
logic board
VG9026| Wifi Jack| Single conductor jack installed in a right panel connected
to the logic board
VG0326| Logic Board| Controls components related to smoking and cooking
VG0327| 10 Board| Controls push button and meat probe jacks
VG0328| Power Supply Board| Provides 24V DC and 5V DC power
| Part # | Name | Description |
|---|---|---|
| VG9501 | Auger Motor | This component rotates the auger to supply fuel to the |
burn pot
VG1967| Blower| This component pulls air from the lower cabinet and into the
firebox for combustion
VG1968| LCD| Used to display Grill information and change grill settings
VG1969(E)| US Power Cable (Euro)| The power cable that plugs into 120VAC (US)
or 240VAC (EU) wall outlet
VG1971| Probe Jack| This component is used to plug probes for monitoring meat
temperature
VG1972| Push Button| This component is used to set the grill to cool down,
reset the controller, or put the display to sleep
VG1975| Igniter| This component provides the initial heat during startup
VG1976| Auxiliary Fan| This component supplies cooling for the power supply
and logic boards
VG1977| RTD| This component is used by the controller to determine the cook
chamber temperature
VG1980| Cook Lights| These components are mounted inside the cook chamber to
provide light to the cooking area
VG9026| WiFi Jack| Single conductor jack install in a right panel connected to
the logic board
VG9023| WiFi Antenna| 2.4GHz WiFi antenna
Memphis Fuse Diagram
Power Cable (VG1969) Fuse
- VG9021 – Fuse Glass 205VAC 5A 5 × 20