ELLAI MT-60108DA One Piece Elongated Toilet Power Dual Flush Instruction Manual

: June 1, 2024
: ELLAI

Table of Contents

Thank you
TROUBLESHOOTING
CARE AND MAINTENANCE
LIMITED ONE YEAR WARRANTY
PREPARATION
TOOLS REQUIRED (NOT INCLUDED)
FEELING CONFIDENT
**
REMOVE OLD TOILET
PACKAGE CONTENTS
HARDWARE CONTENTS
INSTALLATION OVERVIEW
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ELLAI MT-60108DA One Piece Elongated Toilet Power Dual Flush

ELLAI MT-60108DA One Piece Elongated Toilet Power Dual
Flush

Thank you

Thank you for purchasing this product. We’ve created these easy-to-follow instructions to ensure you spend your time enjoying the product instead of putting it together.

TROUBLESHOOTING

PROBLEM| POSSIBLE CAUSE| PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
---|---|---
Poor flush.| Shut-off valve is not fully open.| Open the valve.
Toilet leaking.| The button poles are too long.| Adjust the length of button poles.
Excessive noise when tank is filling.| Valve is blocked.| Remove dirt or obstruction from the valve head. Flush the lines.

CARE AND MAINTENANCE

Do not use in-tank bowl cleaners as they can contain aggressive chemicals that attack the tank components and will void the warranty.
After installation, flush several times and check for leaks.

LIMITED ONE YEAR WARRANTY

Manufactured with exceptional quality standards and workmanship, this product is therefore backed by a limited one year warranty to be free from defects in materials and workmanship. This product is warranted to the original consumer purchaser to be free from defects in materials and workmanship. Any product or part that is defective will be replaced free of charge. Parts found to be defective or damaged can be easily ordered by calling Customer Service at 1-844-396-9711, 8:30 a.m. – 5 p.m., EST, Monday- Friday.
Proof of purchase (original sales receipt) from the original consumer purchaser must be made available for all warranty claims. “Fragile goods” (such as the components of handle/push button, seal ring, fill valves, flush valve and flapper etc.) are only guaranteed for five years. These parts will need to be purchased separately by calling Customer Service if beyond the five-year limited warranty. This warranty does not apply in the event of installation error, abuse, misuse or improper care and maintenance (whether by a contractor, service company or member of the purchaser’s household). This warranty excludes commercial, industrial, and business use applications, incidental/inconsequential damages. failures due to misuse or abuse, and normal wear and tear. Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights that vary from state to state and province to province.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.

Estimated Assembly Time: 55 minutes

TOOLS REQUIRED (NOT INCLUDED)

Tools Required

FEELING CONFIDENT

Feeling Confident

**

Symbol **SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the product.

WARNING

Do not use in-tank cleaners in your toilet. Products containing chlorine (calcium hypochlorite) can serious cause leakage and property damage.

CAUTION

Do not lift or rock the bowl after placement. If the watertight seal is broken, a new wax seal will need to be installed. Be sure the water supply valve is shut off before installation.
Do not over-tighten bowl nuts or tank connection nut.

REMOVE OLD TOILET

Turn off water supply and flush tank completely. Use a towel to dry remaining water from tank and bowl.
Disconnect and remove old water supply line.
Remove tank from bowl by removing old tank-to-bowl hardware.
Remove bowl from floor by removing bolt caps and floor bolt nuts.
Remove floor bolts from toilet flange and clean old wax, putty and sealant from base area. (Temporarily plug floor flange with a towel or cover to block sewer gases from escaping.)