ELLAI MT-60102DA One Piece Elongated Toilet Power Dual Flush Instruction Manual

ELLAI MT-60102DA One Piece Elongated Toilet Power Dual Flush

Product Information

Specifications

• Product: One Piece Elongated Dual Flush Toilet
• Flush: 1.1/1.6 GPF
• Rough In: 12 inches
• Model Number: MT-60102DA

Product Usage Instructions

Care and Maintenance
To ensure proper maintenance of your toilet, follow these steps:

1. Remove the old toilet by disconnecting it from the water supply and unscrewing the bolts.
2. Inspect for any damages or defects. Contact Customer Service at 1-844-396-9711 for replacements.
3. Dry any remaining water in the tank and bowl using a towel.
4. Remove the tank from the bowl by unscrewing the tank-to-bowl hardware.

Installation

1. Remove existing bolts and wax ring from the floor flange.
2. Position the bowl on the floor flange.
3. Install the wax ring to create a seal between the bowl and the floor.
4. Connect the bowl to the floor flange securely.
5. Install the tank lid on the toilet.
6. Install the toilet seat by following the manufacturer’s instructions.

Frequently Asked Questions (FAQ)

Problem: Low Flush

Possible Cause: The button poles are too long.

Solution: Adjust the length of the button poles to ensure proper flushing.

Problem: Toilet Leaking

Possible Cause: Leakage due to improper installation or damaged parts.

Solution: Contact Customer Service for assistance at 1-844-396-9711.

Thank you for purchasing this product. We’ve created these easy-to-follow instructions to ensure you spend your time enjoying the product instead of putting it together.
If the item is no longer for sale, or if you have any questions or problems, please call our customer service department at 1-844-396-9711, 8:30 a.m. – 5 p.m.,EST, Monday – Friday.

TROUBLESHOOTING

CARE AND MAINTENANCE

• Do not use in-tank bowl cleaners as they can contain aggressive chemicals that attack the tank components and will void the warranty
• After installation, flush several times and check for leaks.

LIMITED ONE YEAR WARRANTY

• Manufactured with exceptional quality standards and workmanship, this product is therefore backed by a limited one year warranty to be free from defects in materials and workmanship. This product is warranted to the original consumer purchaser to be free from defects in materials and workmanship. Any product or part that is defective will be replaced free of charge. Parts found to be defective or damaged can be easily ordered by calling Customer Service at 1-844-396-9711, 8:30 a.m. – 5 p.m., EST, Monday – Friday.
  Proof of purchase (original sales receipt) from the original consumer purchaser must be made available for all warranty claims. “Fragile goods” (such as the components) of handle/push button, seal ring, fill valves, flush valve and flapper etc.) are only guaranteed for five years.

• These parts will need to be purchased separately by calling Customer Service if beyond the five-year limited warranty. This warranty does not apply in the event of installation error, abuse, misuse or improper care and maintenance (whether by a contractor, service company or member of the purchaser’s household). This warranty excludes commercial, industrial, and business use applications, incidental/inconsequential damages, failures due to misuse or abuse, and normal wear and tear. Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights that vary from state to state and province to province.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.

Estimated Assembly Time: 55 minutes

TOOLS REQUIRED (NOT INCLUDED)

FEELING CONFIDENT? START YOUR NEXT PROJECT

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the product.

WARNING

• Do not use in-tank cleaners in your toilet. Products containing chlorine (calcium hypochlorite) can seriously damage fittings in the tank. This damage can cause leakage and property damage./No use limpiadores que se coloquen dentro del tanque del inodoro.

CAUTION

• Do not lift or rock the bowl after placement. If the watertight seal is broken, a new wax seal will need to be installed. Be sure the water supply valve is shut off before installation.
• Do not over-tighten bowl nuts or tank connection nut./No apriete demasiado las tuercas de la taza o la tuerca de conexión del tanque.

REMOVE OLD TOILET

1. Turn off water supply and flush tank completely. Use a towel to dry remaining water from tank and bowl.
2. Disconnect and remove old water supply line.
3. Remove tank from bowl by removing old tank-to-bowl hardware.
4. Remove bowl from floor by removing bolt caps and floor bolt nuts.
5. Remove floor bolts from toilet flange and clean old wax, putty and sealant from base area. (Temporarily plug floor flange with a towel or cover to block sewer gases from escaping.)

PACKAGE CONTENTS

HARDWARE CONTENTS

INSTALLATION OVERVIEW

1. Remove existing bolts and wax (if necessary).

2. Install Floor Bolts.

3. Attach Water Supply Line on the toilet

4. Install Wax Ring

5. Position Bowl on Floor Flange
   CAUTION
   Do not rock the bowl back and forth as this may break the seal.

6. Secure Bowl to Floor
   CAUTION
   Pour water into bowl to prevent the escape of sewer gases.

7. Attach the decorative cap

8. Install Seat

9. Attach Water Supply Line

10. Install the tank lid on the toilet

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>