Labco SCIENTIFIC TH192G Pin Type Mini Printer User Manual
- June 1, 2024
- Labco Scientific
Table of Contents
Labco SCIENTIFIC TH192G Pin Type Mini Printer
Product Information
Specifications
- Product Name: TH192G Pin-type Mini Printer
- Compatibility: Built for use with Apera 9500 Series Benchtop pH/Conductivity Meters
- Power: DC5V 3A
- Contents:
- TH192G Pin-type Mini Printer x1
- DC5V 3A Adaptor x1
- RS232-USB Cable x1
- TH5740 Printing Paper x2
- CRC-09 Printer Ribbon (Black) x2
Product Usage Instructions
Printer Installation
Follow the installation instructions provided in the user manual that comes
with the TH192G Pin-type Mini Printer.
Printer Operation
To operate the printer:
- Set the printer to online status (green light on).
- Press [specific button] on the meter to print out saved data.
- If the printer is in offline status (green light off), press [specific button] to save data in the printer temporarily.
- Then press SEL on the printer to print out all saved data altogether.
- For other settings and operations, refer to the meter’s user manual.
Standard Kit
The standard kit includes the following:
- TH192G Pin-type Mini Printer x1
- DC5V 3A Adaptor x1
- RS232-USB Cable x1
- TH5740 Printing Paper x2
- CRC-09 Printer Ribbon (Black) x2
Optional Parts
The optional parts available for the TH192G Pin-type Mini Printer are:
- TH5740 Printing Paper (14 Rolls) x1
- CRC-09 Printer Ribbon (Black, 5 pieces) x1
Frequently Asked Questions (FAQ)
- Q: Can I use the TH192G Pin-type Mini Printer with other pH/Conductivity meters?
A: No, the TH192G Pin-type Mini Printer is specifically designed for use with Apera 9500 Series Benchtop pH/Conductivity Meters and may not be compatible with other devices.
TH192G Pin-type mini printer is built for use with Apera 9500 Series Benchtop pH/Conductivity Meters.
PRINTER INSTALLATION
Connect the printer and the meter via the data cable first, then turn on the power of the printer. The power switch is at the bottom left of the printer. The buttons and indicators are as follows:
- P (red light) — Power indicator, red light means power is on.
- S (green light) — The green light on the meter is in online status; the Green light off: the meter is in offline status.
- SEL button — Press the button to switch between online (green light) and offline (green light off).
- LF button — When the printer is offline, press the button to transfer printing paper. For printing paper installation, refer to the Diagram on the left. printer ribbon replacement, refer to the Diagram on the right.
PRINTER OPERATION
Set the printer to online status (green light on), and press of meter to print out saved data. If the printer is in offline status (green light off), press to save data in the printer temporarily. Then press SEL on the printer to print out all saved data altogether. For other settings and operations, refer to the meter’s user manual.
STANDARD KIT
| CONTENT | QUANTITY | |
|---|---|---|
| 1 | TH192G Pin-type Mini Printer | 1 |
| 2 | DC5V 3A Adaptor | 1 |
| 3 | RS232-USB Cable | 1 |
| 4 | TH5740 Printing Paper | 2 |
| 5 | CRC-09 Printer Ribbon (Black) | 2 |
OPTIONAL PARTS
| CONTENT | QUANTITY | |
|---|---|---|
| 1 | TH5740 Printing Paper (14 Rolls) | 1 |
| 2 | CRC-09 Printer Ribbon (Black, 5 pieces) | 1 |
Contact Information
- Printed technical specifications are subject to change without notification Labcoe is a registered trademark.
- See the full product range online.
- 1800 052 226
- sales@labcoscientific.com.au
- labcoscientific.com.au.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>