Carrier SYSTXBBECC01-C Evolution Connex System Control Instruction Manual
- June 1, 2024
- Carrier
Table of Contents
Carrier SYSTXBBECC01-C Evolution Connex System Control
Specifications
- Product Name: Series C Evolution Connex System Control
- Version: 1.43
- Release Date: November 2023
- Model Number Compatibility: SYSTXBBECC01-C
- Software Delivery : Over The Air (OTA)
Product Usage Instructions
Finding the Current Software Version
To find the current software version, follow these steps:
- Press “menu” on the Main screen.
- Use the down arrow to navigate to the second menu screen.
- Touch the service icon.
- Touch “model/serial numbers” on the resulting screen.
- Touch “wall control” on the resulting screen.
- View the Software Version number.
End User License Agreement
The user must read and accept the End User License Agreement included with
this software package before downloading and installing this software on the
wall control.
Copyright Notice
Carrier Corporation is the copyright owner of this material. Copyright laws
and international copyright treaties, as well as other intellectual property
laws and treaties protect this software update package. User may not and shall
not copy or otherwise reproduce or make available to any other party any part
of or the entire software update package.
Revision History
The Version 1.43 software includes updates to the Series C Bryant Evolution
Connex System Control. Prior versions like 1.11 and 1.05 also had specific
updates.
Installation Instructions
The software installation process is Over The Air (OTA) only. Follow the
steps mentioned above to determine the current software version.
General
This document is provided in conjunction with the “hex” file CINF0143.bex, which comprises the executable code for the following Evolution Connex System Control model numbers:
- SYSTXBBECC01-C
This software is ONLY compatible with these model wall controls.
The series C software is available by Over The Air (OTA) only.
Note: This software is for the Series C controls only. The Series A or B controls cannot use Series C software and vice-versa.
Copyright Notice
Carrier Corporation is the copyright owner of this material. Copyright laws
and international copyright treaties, as well as other intellectual property
laws and treaties protect this software update package. User may not and shall
not copy or otherwise reproduce or make available to any other party any part
of or the entire software update package.
End User License Agreement
The user MUST read and accept the End User License Agreement included with
this software package BEFORE downloading and installing this software on the
wall control.
Revision History
Version 1.43
Version 1.43 software includes the following updates to the Series C Bryant
Evolution Connex System Control:
- Integrate new communicating gas furnace models
- Allow OTA to new communicating furnaces
- Integrate new communicating fan coil
- Set the time zone from Wi-Fi setup screens
- End User License Agreement (EULA) update
- Additional N coils models added
- System monitor correction for Celsius
- OAT (outdoor air temperature) fix for negative temperatures
- Schedule fix to sync system control to APP
- Dealer name change on maintenance reminder to fix overlapping text
- Improved diagnostic codes for communicating outdoor units
Version 1.11 (June 2022)
Version 1.11 software includes the following updates to the Series C Bryant
Evolution Connex System Control:
- System monitor implemented to prevent conditioning including a high and low-temperature alert
- WPA3 security compatibility for Wi-Fi connection
- Functionality added for selection of new evaporator V Coil in the discovery screens
- New Over The Air (OTA) Status Indicator on the idle screen to indicate new firmware is being downloaded
- Temperature compensation algorithm improved for better temperature accuracy
- Time synchronization corrected so it synchronizes immediately when enabled
- Equipment summary updated to reflect correct outdoor unit size with NIM application.
- SAM Module compatibility added
- Wi-Fi advanced options are now available
- “All zones hold” no longer results in a quick timeout on the main screen
Version 1.05 PRODUCTION (February 2, 2022)
Initial release
Installation Instructions
Finding the Current Software Version
The software installation process is Over The Air (OTA) only. The current
software version may be determined as follows:
Press menu on the Main screen,
and then the down-arrow to go to the second menu screen.
Touch service icon.
Touch model/serial numbers on the resulting screen.
Touch wall control on the resulting screen.
View the Software Version number.
Copyright © Carrier Corporation 2020
All trademarks are the property of their respective owners. Wi-Fi® is a
registered trademark of Wi-Fi Alliance Corporation.
FAQ
- Q: Can Series A or B controls use Series C software?
- A: No, the Series C software is only compatible with model wall controls specified for Series C. Series A or B controls cannot use Series C software, and vice-versa.