GE APPLIANCES GE40L08BSM 36 Gallon Side Port Lowboy Electric Water Heater Installation Guide
- June 1, 2024
- GE Appliances
Table of Contents
GE APPLIANCES GE40L08BSM 36 Gallon Side Port Lowboy Electric Water Heater
Product Information
Specifications:
- Model: GE40L08BSM
- Dimensions: 33-5/8 x 27 x 32-3/4 inches
- Power Requirements: 240V/60Hz/30A min. dedicated
- Energy Factor: 0.92
- Pressure Range: 20-125 PSI
- Warranty: 8 years
Installation Information:
- Local Installation Regulations: This water heater must be installed in accordance with local codes, utility company requirements, or the latest edition of the National Electrical Code.
- Installation Instructions: Refer to the installation instruction manual that is packed with your water heater for complete information.
- Location: Place the water heater in a clean, dry area close to where the most heated water is needed to avoid energy and water wastage due to long hot water lines.
- Clearances: Ensure there is enough clearance around the water heater for servicing. Access to controls and drains should not be obstructed. Adequate clearance for earthquake straps should also be provided.
Product Usage Instructions:
- Connect the cold water supply to the inlet of the water heater.
- If required, install a thermal expansion tank per the manufacturer’s instructions.
- Use copper conductors to connect the water heater to the electrical junction box.
- Install a shut-off valve for easy maintenance.
- Connect the hot water outlet to fixtures using unions.
- Ensure proper installation of the Temperature & Pressure Relief Valve and Drain Valve Relief Valve as per local codes.
Important Notes:
The above illustration provides dimensional reference only. Actual product
appearance may vary. The water heater is certified to NSF/ANSI 372 and listed
by Underwriters Laboratories.
Frequently Asked Questions (FAQ):
-
Q: How long is the warranty for the GE40L08BSM water heater?
A: The warranty for this water heater is 8 years. -
Q: What is the household sizing based on?
A: The household sizing is based on back-to-back showers, each lasting 8 minutes.
DIMENSIONS AND INSTALLATION INFORMATION
LOCAL INSTALLATION REGULATIONS:
This water heater must be installed by these instructions, local codes,
utility codes, utility company requirements or, in the absence of local codes,
the latest edition of the National Electrical Code. It is available from some
local libraries or can be purchased from the National Fire Preventions
Association, Batterymarch park, Quincy, MA 02169 as booklet ANSI/NFPA 70.
INSTALLATION INFORMATION:
For complete information, see installation instruction packed with your water
heater.
POWER REQUIREMENTS:
Check the markings on the rating plate of the water heater to be certain the
power supply corresponds to the water heater requirements.
LOCATION:
Locate the water heater in a clean dry area as near as practical to the area
of the greatest heated water demand. Long uninsulated hot water lines can
waste energy and water.
REQUIRED CLEARANCES:
There must be sufficient clearance between any object and the top, rear and
sides of the water heater in the event service is needed. The controls and
drain at front of unit must have clear access for operation and service.
Installations that require minimal clearance on the sides or rear of the water
heater for earthquake straps are also acceptable. In these cases, additional
clearance should be provided on the opposite side of the unit to allow for
service access
FEATURES AND BENEFITS
- Side Port Lowboy – Make the most of tight spaces with a water heater that fits where height is a concern.
- Household Size – Provide hot water for the whole family of 2 to 4 persons.
- Quick Recovery – Two 5500W heating elements quickly increase water temperature for hot water when you need it.
- High First Hour Delivery – Live comfortably with this best in class unit that delivers 63 gallons of hot water in the first hour (Measured through DOE First Hour Rating).
- Inlet Tube – Replenishes water from the bottom of the tank to maximize hot water delivery.
- Easy Set Up – Replace your old water heater quickly and easily using standard water and electrical connections.
- Anode Rod – Durable design offers long-lasting protection against corrosion.
- Drain Valve – Rust-proof construction can be counted on to provide long-lasting service.
- Adjustable Thermostat – Change temperature to your desired setting.
- Warranty – 8-year limited Parts Warranty*.
- Model GE40L08BSM – Diamond Gray
*See written warranty for full details
| Rated capacity (gallons) | 36 |
|---|---|
| Nominal capacity | 36 |
| Product application | Residential |
FEATURES
Family size*| 2-4
Control type| Thermostat
Temperature setting| 90-150° F
Temperature setting factory default| 120° F
Drain valve type| Plastic
WEIGHTS & DIMENSIONS
Height to water connection (in.)| 33-5/8
Tank dimensions (diameter x height) (in.)| 27 x 32-3/4
Connection sizes—hot water outlet (MNPT)| 3/4”
Connection sizes—hot water intlet (MNPT)| 3/4”
POWER/RATINGS
Electrical circuit direct wired| 240V/60Hz/30A min. dedicated
Heating elements| Copper
Heating element density| High density
Lower element (watts)| 5,500
Upper element (watts)| 5,500
Energy factor| 0.92
First Hour Rating (FHR) (gallons)| 63
Operating water pressure| 20-125 PSI
WARRANTY
Parts warranty| 8 years
- Household sizing based on back-to-back showers, 8 minutes long.
For answers to your GE Profile” or GE Appliances product questions, visit our website at geappliances.com or call GE Answer Center® Service, 800.626.2000.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>