contardi SO LINEAR L.120 Fly Linear LED Pendant Light Installation Guide
- June 1, 2024
- contardi
Table of Contents
contardi SO LINEAR L.120 Fly Linear LED Pendant Light Installation Guide
-
Use the diagram on the side as a reference for drilling the ceiling.
-
Fix the bracket on the wall. (use appropriate anchors depending on the type of wall)
-
Carry out the wirings as shown in the diagram.
-
Remove the cable clamp from its support (4.1) and use the screw provided to fix it to the ceiling (4.2).
Unscrew the highlighted component (4.3) before inserting the steel cable inside the cable clamp letting out the excess cable (4.4).
Partially screw the component removed previously so that it can be pressed during the adjustment phase (4.5).
Once the length of the cable has been established, screw the component (4.6) back on completely and cut the excess cable (4.7).
-
Adjust the length of the electric cable by removing the cable clamp and unscrewing the dowel shown.
When the desired length has been reached, screw the dowel back and reposition the cable clamp. -
Fix the canopy to the bracket using the screws provided.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>