LASER NAVC-BHUD-982 Wireless CarPlay and Android Auto Device User Guide
- June 1, 2024
- Laser
Table of Contents
LASER NAVC-BHUD-982 Wireless CarPlay and Android Auto Device
Product Information
Specifications:
- Product Name: NAVC-BHUD-982
- Feature: Wireless CarPlay/Android Auto
Product Usage Instructions
Step 1: Connect with CarPlay Screen
- Turn on the CarPlay screen.
- On your phone, go to the Settings menu > turn on Bluetooth, Wi-Fi, and Location Services. Within Bluetooth settings, search for new devices.
- Select NAVC-BHUD_XXXX to initiate the pairing process. If prompted, enter the passcode 0000.
- Follow on-screen instructions to grant the necessary permissions.
- Give it about 30 seconds for your CarPlay screen to show the CarPlay/Android Auto home screen.
Step 2: Connect to Your Car Audio
Audio Option: (3.5mm) Auxiliary audio cable
When best to use:
When your car stereo has a 3.5mm AUX Audio IN port. This method provides the
best audio experience.
- Connect the included 3.5mm audio cable to the CarPlay screen and tour the car stereo.
- Switch the car audio system to ‘AUX’ mode.
Audio Option: FM frequency
When best to use:
When your car stereo does not have a 3.5mm AUX Audio IN port but has an FM
radio.
- On the CarPlay screen, click on the FM TX icon > select a preset frequency or move the slider at the top to select a custom frequency.
- On your car FM radio, tune to the same frequency you’ve selected on the CarPlay screen.
Audio Option: Built-in speakers
- When best to use: When no external audio connection is available.
No setup is required.
Important:
For the Android OS compatibility guide, see
here. Choose an FM frequency with minimal interference from
local radio stations. Try a few different frequencies and find one that gives
the best audio quality.
Frequently Asked Questions (FAQ)
-
Q: How do I reset the device?
A: To reset the device, simply power it off and back on again. You can also refer to the user manual for specific reset instructions. -
Q: Can I use this product with any car model?
A: The product is compatible with most car models that support CarPlay or Android Auto functionality. However, it’s recommended to check the compatibility list provided by the manufacturer for specific details. -
Q: How do I update the firmware of the device?
A: Firmware updates can typically be done through the manufacturer’s website or by following the instructions provided in the user manual. Make sure to follow the steps carefully to avoid any issues during the update process.
SCAN FOR MANUAL
CONNECT WITH CAR PLAY SCREEN
- Turn on the CarPlay screen.
- On your phone, go to the Settings menu > turn on Bluetooth, Wi-Fi, and Location Services. Within Bluetooth settings, search for new devices.
- Select NAVC-BHUD_XXXX to initiate the pairing process. If prompted, enter the passcode 0000.
- Follow on-screen instructions to grant the necessary permissions.
- Give it about 30 seconds for your CarPlay screen to show the CarPlay/Android Auto home screen.
CONNECT TO YOUR CAR AUDIO
Audio Option
| When best to use|
How to connect
---|---|---
(3.5mm) Auxiliary audio cable| When your car stereo has a 3.5mm AUX Audio IN
port. This method provides the best audio experience.| 1. Connect the
included 3.5mm audio cable to the CarPlay screen and your car stereo.
2. Switch the car audio system to ‘AUX’ mode.
FM frequency| When your car stereo does not have a 3.5mm AUX Audio IN port but has an FM radio.| 1. On the CarPlay screen, click on the FM TX icon
select a preset frequency or move the slider at the top to select a custom frequency. *****
2. On your car FM radio, tune to the same frequency you’ve selected on the CarPlay
screen. *****
Built-in speakers| When no external audio connection is available.| No setup is required.
Important:
- For the Android OS compatibility guide, see https://www.laserco.com.au/cameras/dash-cameras/laser-wireless-car-display-centre.
- Choose an FM frequency with minimal interference from local radio stations. Try a few different frequencies and find one that gives the best audio quality.
Product support
- E: support@laserco.com.au
- P: (02) 9870 3355