LAICA IMFG-MS-b GENOVA Tap Filter Instruction Manual

LAICA IMFG-MS-b GENOVA Tap Filter

Product Description

COMPONENTS

A) Connector
B) HYDROSMART™ METAL STOP filter
C) Selector
E) Fastening ring

F) Rubber seal

G) Stainless steel strainer (removes main impurities)

H) Adapter keys

I) Set of adapters for taps with internal thread diameter of 23 mm and 24 mm

L) Set of adapters for taps with external thread diameter of 20.7 mm and 21 mm

M) Adapter for round taps with diameter from 15 mm to 25 mm

N) 2 universal seals for adapters

Dear Customer, LAICA would like to thank you for choosing this product, designed according to criteria of reliability and quality for complete satisfaction

IMPORTANT READ CAREFULLY BEFORE USING KEEP FOR FUTURE REFERENCE

The instruction manual must be considered an integral part of the product and must be kept for its entire life.
The connector is equipped with a stainless steel strainer that removes the main impurities, such as sand and suspended particles, that may be present in the water mains supply.
If the product is transferred to another owner, its documentation must also be transferred in its entirety. To ensure the safe and correct use of the product, the user must carefully read the instructions and warnings contained in the manual insofar as they provide important information regarding safety, user and maintenance instructions. Should the instruction manual get mislaid or you require additional information or clarifications, please fill in the relevant form on the website: https://www.laica.it/ in the FAQ and Support section.
Instruction manual available at: www.laica.com/manuals.

CAUTION:

The GENOVA tap filter is a device intended for the treatment of drinking water.

The HYDROSMART™ METAL STOP filter filters drinking water, improving its taste and reducing any unwanted s u b s t a n c e s t h a t m a y otherwise be present. The HYDROSMART™ METAL STOP filter is used to filter m a i n s d r i n k i n g w a t e r, improving its taste by reducing any unwanted substances that may be present.
The HYDROSMART™ METAL STOP filters consist of silver-coated vegetable-based activated carbon, a special ion exchange resin and hollow fibre membranes. Activated carbons are generally effective in reducing chlorine and derivatives, while the ion exchange resin blocks heavy metals such as lead that may be present in mains water.
The hollow fibre module, instead, is effective in removing microplastics, particulate matter and micro-debris that may be present in mains water.
The HYDROSMART™ METAL STOP filter maintains the mineral salts naturally present in mains water and effectively reduces: heavy metals such as lead and cadmium, microplastics, sand, rust, suspended particles, chlorine, chlorinated organic herbicides and pesticides and chlorinated organic solvents.

The GENOVA tap filter allows you to select from 2 different water delivery modes:

1. Filtered water for drinking.
2. Unfiltered water with spray head.

CAUTION:

The HYDROSMART™ METAL STOP filter filters water, which IN ANY CASE MUST BE DRINKABLE and microbiologically safe (check with the competent authority in your region).For informed use, request information from your mains water supplier or test the water coming from your house tap.

GENERAL SAFETY PRECAUTIONS

• After removing the product from its packaging, make sure it is intact and there is no damage resulting from transport. If unsure, do not use the jug and contact an authorized retailer.
• Follow the instructions in this manual. Incorrect use may affect the safety of the product or cause damage to the product itself.
• The manufacturer cannot be held responsible for any damage resulting from improper or incorrect use.
• For people affected by specific illnesses and allergies or on controlled diets, consult your doctor before using the filtering system.
• Keep the plastic packaging bag away from children: danger of suffocation.
• Use this product only for its intended purpose, that is, as a DRINKABLE WATER FILTER DEVICE. Any other use is considered non-compliant and therefore hazardous.
• In the case of emergency situations reported by the competent authorities, suspend use of the filter system and contact the water mains operator for further information. As soon as the authorities declare that tap water is drinkable and safe again, the filtering system must be cleaned as indicated in the paragraph “CARE AND MAINTENANCE” and the HYDROSMART™ METAL STOP filter must be replaced, following the indications in the paragraph “USING THE FILTERING SYSTEMACTIVATING THE HYDROSMART™ METAL STOP FILTER”.
• Keep the product out of reach of children
• The filter must be prepared, replaced and maintained only by people over the age of 12.
• Children and individuals with reduced physical, sensory or mental capacities or unskilled people may only use the product if previously instructed on its safe use and only if informed of the dangers connected to the product itself.
• In the event of faults or malfunctions, contact an authorised retailer. Information on technical support can be obtained by filling in the relevant form on the website https://www.laica.it/ in the FAQ and Support section.
• Treat the product with care, protect it from impacts, extreme variations in temperature, humidity, dust, direct sunlight and sources of heat.
• Keep the product away from stoves, hot plates, ovens, microwaves or flammable materials.
• DO NOT use this product to produce drinkable water.
• DO NOT use the product as a toy.
• DO NOT tamper with or break the filtering system and the filter for any reason.
• DO NOT expose the product to the elements (rain, sun, etc.).
• DO NOT insert objects into the openings.
• DO NOT place the device in a steriliser under operation.
• DO NOT freeze the device.
• DO NOT wash in the dishwasher.
• DO NOT use the filtering system with pre-treated water
• DO NOT filter hot water. CAUTION:
  • The flow of water at a temperature higher than 50°C through the connector may cause permanent damage.
  • The flow of water at a temperature higher than 35°C through the filter may cause permanent damage to its functionality.
  • To guarantee the best performance, the working pressure should be between 0.20 and 0.35 MPa.
• Filter only cold running water from the domestic water supply, with the filter properly assembled
• This device is NOT intended for professional use but for domestic use only.

IMPORTANT NOTES FOR PRODUCT USE

• The HYDROSMART™ METAL STOP filter filters water, which IN ANY CASE MUST BE DRINKABLE. Before use, verify the water quality with the competent authority in the area for informed use of the product.
• The GENOVA filtration system maintains the pH value within the range indicated by European Directive (EU) 2020/2184 concerting the quality of water meant for human consumption.
• Silver is used in the HYDROSMART™ METAL STOP filter system plant as a manufacturing aid in order to achieve internal bacteriostatics. Any release of silver ions falls under the guidelines from the World Health Organization (WHO).

The filter for GENOVA HYDROSMART™ METAL STOP taps is designed to treat drinking water. The filter treats drinking water by reducing the amounts of any undesirable substances that may be present.

The HYDROSMART™ METAL STOP filter can treat 1200 litres (for a maximum of 10 litres filtered each day for 120 days). After 120 days (maximum 1200 litres filtered during such period) the filter must be replaced.

DECLARATION OF CONFORMITY

• Filtration systems produced by LAICA are compliant with the following standards:
• Ministerial Decree no. 174 dated 6/04/2004 regarding materials and objects that may be used in collection, treatment, supply and distribution systems for water intended for human consumption.
• Legislative Decree no. 18, 23rd February 2023, implementation of Directive (EU) 2020/2184 regarding the quality of water intended for human consumption.
• Regulation 1935/2004/EC regarding materials in contact with food.
• Regulation (EU) 10/2011 regarding plastic materials and objects intended to come into contact with food.
• Ministerial Decree no. 25 dated 07/02/2012 (ITALY), technical provisions concerning equipment designed for the treatment of water intended for human consumption.
• Ministerial Decree dated 21st March 1973 and subsequent amendments concerning packaging, recipients, tools, intended to come into contact with food substances or substances for personal use.
  Attention: this equipment requires regular periodic maintenance in order to guarantee the potability requirements of the treated drinkable water and maintenance of the improvements as declared by the manufacturer.

DECLARATION OF CONFORMITY

PREPARING THE TAP FILTER

1. Before performing the following steps, wash your hands and thoroughly rinse all the components required to install the filtering system under running water.
   Clean the outer part of the connector and the adapters with a damp sponge and delicate detergent, then rinse thoroughly with cold drinking water.
   Do not use aggressive detergents, solvents, chemical or abrasive products.

2. Remove the aerator from the tap (fig. 1, 2) and choose the best adapter from the ones provided: I, L or M.
   
   

3. To install the connector using the type I or L adapters, remove the fastening ring from the connector and insert it on the tap (fig. 3).
   

4. Screw the adapter onto the tap using the fastening key (H) ( fig. 4 ) t o help you, taking extra care when inserting the seal (N) in the relevant seat (fig. 4).
   

5. Lower the fastening ring until the adapter is covered (fig. 5) and screw on the connector.
   

6. To install the connector with the M adapter, proceed as follows:

   • Remove the fastening ring from the connector and take the L adapter with Ø21 mm diameter, then assemble the
     three pieces as described in figure 6A, 6B and 6C.
     
     

   • Loosen the fastening band with a flat head screwdriver and remove the smaller seal inside the adapter M (fig. 7A, 7B).
     

   • Choose the best seal: only the one with the largest diameter (fig. 8A) or both with one inserted inside the other, pressing firmly and taking extra care over the direction in which they are inserted (fig. 8B).
     

   • Install the adapter M on the tap and tighten the fastening band using a flat head screwdriver to secure it firmly to the tap (fig. 9A and B ).
     

   • Screw the connector onto the ring ( fig. 10).
     

7. Remove the HYDROSMART™ METAL STOP filter from its packaging and rinse it under running water. Now hook the filter to the connector as shown in figure 11A, 11B, 11C.
   
   

SMART FILTRATION SYSTEM – FREE LAICA HOME WELLNESS APP – USE

List of compatible devices:

• iOS : iPhone with version 10 operating system.
• For devices with Android™ operating system:
  from version 6.0 (Marshmallow).
  By adding the HYDROSMART™ METAL STOP filter to the free “Laica Home Wellness” app, you can receive automatic notification on your smartphone when to replace the filter.

1. . Install the free “Laica Home Wellness” app on your smartphone.

2. Start the app and enter the “FILTER” section from the main screen.

3. Add the HYDROSMART™ METAL STOP FILTER by pressing the “+” key. It is possible to add the filter by scanning the QR code printed on the upper part of the filter or manually by pressing the “Select manually” button.

4. The app adds the filter and automatically prompts the replacement date. To optimise the effective duration of the filter based on the water treated, you can select the chlorine level in your water supply.
   To use it properly, request further information from your water supplier or carry out a preliminary assessment of the local water supply.

5. Save the settings by pressing the    key.

6. When the filter replacement date is reached, the notification to replace it will appear on your smartphone. The notification is also sent to the email address given during registration.

   • To scan the QR code on the upper part of the filter, you must authorise the app to access to your smartphone camera.
   • To receive notifications when to replace the filter, you must enable the settings on your smartphone.
   • To replace the filter, you can add a new one by scanning the QR code printed on the upper part of the filter or by updating the expiry date by clicking on the “Filter expired” button (click to replace)”.

USING THE FILTERING SYSTEM Activating the GENOVA HYDROSMART™ METAL STOP

filter:

When first used and every time the HYDROSMART™ METAL STOP filter is changed, turn the tap on and allow the water to flow through the filter for several minutes (at least 4-5 minutes) to correctly activate the materials of which the filter is composed. This water can be used for watering plants. If the GENOVA filtering system has not been used for 24 hours or more, allow the water to flow for 30-60 seconds before using the filtered water again.

CAUTION:

• To guarantee the performance characteristics of the filtering system, it is recommended to filter cold water only.

• The flow of water at a temperature higher than 50°C through the connector may cause permanent damage.
  The flow of water at a temperature higher than 35°C through the filter may cause permanent damage.

• To adjust the water flow properly, open the tap slowly.

The GENOVA filtering system has 2 different ways of dispensing the water which can be selected with the selector C:

1. Filtered water for drinking, washing fruit and vegetables, cooking and carry out all routine tasks with safe, pleasant tasting water.
   

2. Unfiltered water with spray head.
   

REPLACING THE FILTER

To replace the filter, turn the filter anticlockwise and remove it by pulling it outwards (fig. 12A, 12B, 12C).

Replace it with a new filter repeating the steps described in point 7 of the paragraph “PREPARING THE FILTERING SYSTEM” and “USING THE FILTERING SYSTEM – Activating the HYDROSMART™ METAL STOP filter”.
To achieve the best results and guarantee the safety of the filtering system, we recommend replacing the filter every 4 months or 1200 litres of filtered water.

CARE AND MAINTENANCE

Ensure your hands are clean during maintenance operations on the filtering system. Regularly clean the external part of the filter with a damp sponge and rinse with cold running drinkable water.
Regularly clean the outer part of the connector with a damp sponge and delicate detergent, then rinse thoroughly with cold drinking water.
Do not use aggressive detergents, solvents, chemical or abrasive products.
It is recommended to thoroughly clean the entire connector each time the filter is changed.
For maintenance, remove the entire filtering system by following the installation instructions in reverse order.

1. Rinse the connector under unfiltered running drinking water.
   Do not use detergents, solvents, chemical or abrasive products to clean the connector.
   If necessary, remove the fastening ring (E), the rubber seal (F) and rinse the stainless steel strainer (G) under
   running drinking water.

2. Use a small brush to remove any impurities and/or limescale deposits in the unfiltered water outlet holes, and rinse all under running drinkable water.

3. Do not wash the connector or the HYDROSMART™ METAL STOP filter in the dishwasher.

REPLACING ANY DAMAGED PARTS

In the event of breakage or damage to the adapters, you can purchase spare parts at authorised retailers (consult the list of all the LAICA authorised retailers on the website www.laica.it).
Then, dispose of the damaged components as described in the paragraph “DISPOSAL PROCEDURE”.

TROUBLESHOOTING

The device does not dispense unfiltered water, or it does, but it is uncontrollably sprayed| The steel strainer is blocked by sediment| Deinstall the connector and clean the steel strainer as indicated in the section “CARE & MAINTENANCE”
The unfiltered water outlet holes are clogged| Deinstall the connector and clean the holes as indicated in the section “CARE & MAINTENANCE”
The device does not dispense filtered water| The filtering system has captured micro-sediment in the water and become clogged| Replace the HYDROSMART™ METAL STOP filter
None of the adapters provided can be attached to the tap| The tap is nonstandard size or damaged| Use the adapter M
There is a leak between the adapter and the tap| The adapter has not been tightened sufficiently| Remove the connector and fix the adapter using the appropriate tool, then remount the connector
No seal| Insert the seal N
There is a leak between the adapter and the connector| The fastening ring has come loose| Tighten the fastening ring
Sediment between the adaptor and the connector| Remove the connector and clean all components as indicated in the section “CARE & MAINTENANCE”
Problem| Possible cause| Solution
---|---|---
There are leaks between the connector and the HYDROSMART™ METAL STOP filter| The filter has not been correctly assembled| Dismantle the filter and reassemble it following the instructions
The selector does not turn or work| The connector is damaged| Replace the connector
The filtered water has an unpleasant taste| The filter has not been correctly activated| Activate the filter again as described in the paragraph “USING THE FILTERING SYSTEM”

DISPOSAL PROCEDURE

• The HYDROSMART™ METAL STOP filter, which must be replaced every 1200 L / 4 months months of filtered water, should be disposed of as non-recyclable waste.
• The connector, only in the event it breaks, must be disposed of as non-recyclable dry waste.

WARRANTY

This appliance is guaranteed for 2 years from the time of delivery of the goods, or another longer term envisaged by the national legislation of the consumer’s residence. This provision complies with Italian and European legislation.
The Laica products are designed for home use and must not be used in public venues. The warranty only covers manufacturing defects and does not apply if the damage is caused by an accidental event, incorrect use, negligence or misuse of the product. Use only the accessories supplied;
the use of different accessories may result in invalidity of the warranty. Do not open the unit for any reason; in the case of opening or tampering, the warranty is definitively voided.
This warranty does not apply to parts subject to wear or to the batteries when supplied. After 2 years from delivery, or another longer term envisaged by the national legislation of the consumer’s residence, the warranty expires; in this case, the technical assistance interventions will be carried out against a fee. Information on technical assistance, whether under warranty or for a fee, can be requested by contacting info@laica.com.
No payment will be due for repairs or replacements of products that fall within the terms of the warranty. In the event of faults, contact the retailer. Do NOT send the appliance directly to LAICA. All the operations under warranty (including those of replacement of the product or part thereof) will not prolong the duration of the original period of warranty of the product replaced. The manufacturer declines any liability for any damage that may, directly or indirectly, be caused to persons, property or animals as a result of the non-observance of all the requirements established in the relevant instructions manual and concerning, especially, warnings relating to installation, use and maintenance of the appliance. LAICA, in its constant commitment to improving its products, is entitled to changing without any notice, in whole or in part, its products in relation to production requirements, without this entailing any liability for LAICA towards its dealers. For further information: www.laica.it.

References

• One moment, please...
• Manuals – LAICA
• Gamma prodotti LAICA per la filtrazione e benessere
• Gamma prodotti LAICA per la filtrazione e benessere

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>