ELMAG 56902 TIG Welding Inverter Owner’s Manual
- June 1, 2024
- ELMAG
Table of Contents
ELMAG 56902 TIG Welding Inverter
- Model WIN TIG DC 220 M – HF, art. 553
- APPLY NOW FOR UP TO 24 MONTHS’ WARRANTY!
- Simply register at https://welding.cebora.it/de/assistance/register-your-product within 15 days of purchase.
CEBORA serial no
- Article Number: 56902
- EAN Code: 9004853569029
TECHNICAL FACTS
- NEW: Multi-voltage system can be used for 230 V and 115 V
- TIG CYCLE: Fully definable welding cycle
- Active-Power-Control (APC) welding process for achieving colder weld beads
- White Rapid TIG Spot spot welding functions for optimum tacking without tarnish and minimal heat input
- The interval welding function enables welds with optimal heat input and penetration depth
- High pulse frequencies allow a welding arc to be focused more precisely on the area to be welded
- Various pulse arcs (low, medium, high and ultra-high frequency) for thin-walled materials where the heat input must be minimal
- Different types of arc ignition allow the user to adapt the welding machine to their technique of TIG welding while remaining extremely precise
- Up to 9 welding programs can be stored
- 1-button operation and intuitive colour LCD
PRODUCT HIGHLIGHTS
- Smart welding under full control
CEBORA TIG WELDING INVERTER
The WIN TIG DC 220 M model offers more welding power and can be operated with tungsten electrodes up to Ø 3.2 mm. It allows complete control of the TIG welding cycle, making it ideal for high-quality welds in commerce and industry. Compliance with EN 61000-3-12 ensures a significant reduction in energy consumption and a high supply voltage tolerance (+ 15%/-20%). The power source can therefore be operated with power generators too (at least 10 kVA).
Application examples
- Production, repair & assembly companies
- Pipeline construction
- Metal, railing construction
- Machine, plant & tank construction
- Service & after-sales service
Materials
- Steel
- CrNi
- Copper
SPECIFICATIONS
CEBORA TIG WELDING INVERTER
Including ELMAG®-Quality Check
- Depreservation, degreasing and de-securing
- Assembly until ready for use
- Oil filling of gearboxes, oil baths and central lubrication systems
- Testing of electrics, safety components and devices
- Test run on all shift and power levels
- 30-minute test run at the highest power level
- Checking and, if necessary, adjusting machine tolerances,
- e.g. V-belt tension and spindle concentricity
- Testing of all machine functions
For lathes, in addition
- Lathe chuck reassembly with the marking of minimum tolerance
- Measurement of the spindle nose to tolerance < 0.01 mm
- Measurement of the lathe chuck
- Setting the tailstock parallelism
- For MIG/MAG/MMA/WIG welding, plasma cutting & induction heating equipment (depending on the type of equipment)
- Assembly of the unit, chassis assembly
- Intermediate hose assembly
- Mains plug assembly and gas hose assembly
- Connection preparation for gas or compressed air
- Control cable plug Assembly on hose assembly
- Installation & activation of water cooling unit for modular systems
- Filling with cooling liquid for liquid-cooled units
- Short test run or test welding
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>