NEXTIME PWAR3534 Table Wall Clock Instruction Manual

NEXTIME PWAR3534 Table Wall Clock

Product Information

Specifications

• Model: PWAR3534
• Ambient Light Sensor
• 12/24Hr Time-Set
• Battery Backup: 1 x CR2032
• DC Input
• Adapter Input: AC100-240V, 50/60Hz
• Adapter Output: DC 5V/1A
• USB Input: DC 5V/1A

Product Usage Instructions

Power Supply

1. Plug the AC/DC adapter into an AC household outlet and connect the DC jack to the back of the unit.
2. Ensure the clock is powered on and ready to use.

Battery Backup Installation

1. Remove the insulator from the battery compartment to activate the backup power is provided by 1 x CR2032 battery.

Hanging the Clock on the Wall

1.  Use the Positioning Pins on the back to mark the hanging position on the wall.
2. Press the clock against the wall to create hanging marks through the positioning pins.
3. Drill two holes or use adhesive hooks to hang the clock securely.

Time Setting

1. Press and hold the TIME-SET button for 2 seconds to enter the time-setting mode. The hour digits will flash. Use the +/- buttons to set the current hour.
2. Press the TIME-SET button again to set the minute digits using the +/- buttons.
3. Press the TIME-SET button once more to save and exit the time-setting mode.

Switching Time Format
To switch between 12/24Hr time format, press the TIME-SET button once. The display will indicate the selected format along with AM/PM icons.

In the Box

• 1 x Digital Wall Clock
• 1 x USB Power Adapter (DC 5V/1A)
• 1 x USB Cable (Length: 3M)
• 1 x User Manual
• 2 x Screws
• 2 x Plastic Anchors
• 2 x Adhesive Hooks

Frequently Asked Questions (FAQ)

• Q: How do I activate the battery backup?
  A: Remove the insulator from the battery compartment to activate the backup power provided by 1 x CR2032 battery.

• Q: How can I switch between 12-hour and 24-hour time formats?
  A: Press the TIME-SET button once to switch between 12-hour and 24-hour time formats. The display will indicate the selected format.

Features

Power Supply

• Adapter Input: AC100-240V, 50/60Hz
• Adapter Output: DC 5V/1A
• USB Input: DC 5V/1A
• Battery Backup: 1 x CR2032

Operation

1. Plug the AC/DC adapter to an AC household outlet, and plug the DC jack into the back of the unit. Then this clock is ready to work for you.
2. Take away the insulator from the battery compartment. the battery provides backup power to the clock in the event of temporary power interruption.

Time Setting

1. Press and hold the TIME-SET button for 2 seconds to enter the time-setting mode, the hour digits flash.
   Press +/- button to set the current hour (hold for fast adjustment).

2. Press the TIME-SET button again, the minute digits flash.
   Press +/- button to set the minute time.

3. Press the TIME-SET button again, save and exit time-setting mode.

Switching 12/24Hr Time Format
Press the TIME-SET button once to change the 12/24Hr time format, the corresponding AM/PM icon will be shown on display.

How to Hang it on the Wall?

1. Use the Positioning Pins on the back to help mark the hanging position on the wall.
2. Press the clock against the wall to create hanging marks through the positioning pins.
3. Drill two holes or stick the hooks on the wall and hang the clock.

In the Box

• 1 x Digital Wall Clock
• 1 x USB Power Adapter (DC 5V/1A)
• 1 x USB Cable (Length: 3M)
• 1 x User Manual
• 2 x Screws
• 2 x Plastic anchors
• 2 x Adhesive hooks

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>