nVent GUV16070 Ground Rod Clamp U Bolt Owner’s Manual
- June 13, 2024
- nVent
Table of Contents
nVent GUV16070 Ground Rod Clamp U Bolt
Product Information
Catalog Number: GUV16070
Features
- Accepts conductors in both parallel and perpendicular orientations
- For use with copper-bonded ground rods
Product Attributes
Diagrams: (diagrams are not provided in the text)
WARNING:
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication, or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death, and/or void your warranty.
Contact Information
- Europe Netherland s: +31 800-0200135
- France: +33 800 901 793
- Europe Germany: 800 1890272
- Other Countries: +31 13 5835404
- APAC Shanghai: + 86 21 2412 1618/19
- Sydney: +61 2 9751 8500
Brands
nVent.com CADDY ERICO HOFFMAN RAYCHEM SCHROFF TRACER Respective owners of the brands. nVent reserves the right to change specifications without notice.
Product Usage Instructions
- Refer to the product instruction sheets and training materials for detailed installation and usage instructions. These can be found at www.nvent.com or obtained from your nVent customer service representative.
- Ensure that the conductors are inserted in either parallel or perpendicular orientations as required by your application.
- This product is designed specifically for use with copper-bonded ground rods. Do not use it with other types of ground rods.
- Follow all safety instructions and warnings provided by nVent to avoid product malfunction, property damage, serious bodily injury, or death.
- If you have any questions or need further assistance, contact nVent customer service representative using the provided contact information.
FEATURES
- Accepts conductors in both parallel and perpendicular orientations
- For use with copper-bonded ground rods
PRODUCT ATTRIBUTES
- Article Number: 710400
- Material: Copper;Bronze;Brass
- Ground Rod Diameter, Nominal: 5/8″ – 1″
- Ground Rod Diameter, Actual: 14.2 – 23.2 mm
- Conductor Size: #4 Solid – 2/0 Stranded;16 mm² Stranded – 70 mm² Stranded
- Complies With: IEC® EN 62561-1
- Unit Weight: 0.240 kg
DIAGRAMS
WARNING: nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication, or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury, and death and/or void your warranty
North America
- TELL: +1.800.753.9221
- Option 1 – Customer Care
- Option 2 – Technical Suppor
Europe
- Netherlands: +31 800-0200135
- France: +33 800 901 793
Europe
- Germany: 800 1890272
- Other Countries: +31 13 5835404
APAC
- Shanghai: + 86 21 2412 1618/19
- Sydney: +61 2 9751 8500
© 2023 nVent. All nVent marks and logos are owned or licensed by nVent
Services GmbH or its affiliates. All other trademarks are the property of
their respective owners.
nVent reserves the right to change specifications without notice