DECORATIVE CEILING TILES MG-1012 Plain To Beautiful In Hours Wood Slat Walls Installation Guide
- June 1, 2024
- DECORATIVE CEILING TILES
Table of Contents
DECORATIVE CEILING TILES MG-1012 Plain To Beautiful In Hours Wood Slat
Walls
Product Information
Specifications:
- Product Name: Wood Slat Walls
- Manufacturer: Decorative Ceiling Tiles, Inc.
- Contact: 1-866-297-0380
- Website: www.decorativeceilingtiles.net
Product Usage Instructions
Step 1: Preparation for Work
Before starting, prepare the base by using plywood or MDF. Ensure the
surface is clean by removing any existing wallpaper or film.
Step 2: Hot Melt Application
Apply a generous amount of construction-grade adhesive (such as Gorilla
Glue or Loctite) using a glue gun. Consider adding silicon for humid
conditions to enhance durability.
Step 3: Installation Direction
Install the materials either horizontally or vertically as required. Secure
the pieces by screwing them onto the tongue or interlocking space for a sturdy
fixing.
Step 4: Cutting with a Circular Saw
Use a circular saw with a ceramic blade to cut the materials to the
required length for precision and accuracy.
Step 5: Corner Assembly
For corners, combine the two grooves of the materials to ensure a seamless
and tight fit, enhancing structural integrity.
Tools and Materials Required
- Circular Saw
- Measuring Tape
- Wood Glue
- Glue Gun
Environmental Information:
- Limited Living Environment Pollution Reduction
- Global Environmental Improvement
- Pollution Reduction and Resource Circulation
Handling Precautions:
For any handling precautions or further assistance, contact Decorative
Ceiling Tiles, Inc. at 1-866-297-0380
or visit their website.
FAQ:
-
Q: Can I paint the wood slat walls?
A: Yes, you can paint the wood slat walls to match your desired color scheme. Make sure to use appropriate paint suitable for wood surfaces. -
Q: How do I clean the wood slat walls?
A: To clean the wood slat walls, use a mild soap solution and a soft cloth. Avoid harsh chemicals that may damage the wood finish.
Handling Precautions
- Kindly Consider 10mm used for overlapping.
- Avoid direct sunlight and use within interior spaces, long exposure to sunlight could cause fading.
- The product can slightly vary in color based on the production lot number, we recommend installing with the same lot of products.
- There could be a slight variation in color from the samples seen in the brochure and the actual production.
- Recommend to keep in room temperature 24/48 hrs for acclimatization.
- Gently handle the edge of the product.
- Smooth and dust free.
- Only for indoor use.
- Water proof but prolonged exposure to moisture can do harm to the product.
- Cleaning only with a soft damp cloth without any chemicals or cleaning agents.
Tools and Materials
INSTALLATION
-
Step 1: Preparation for work with Plywood / Drywall
Before starting the construction process, it is advisable to prepare the base by using plywood or MDF. Remove any existing wallpaper or film from the surface to ensure a clean foundation. -
Step 2: Hot Melt Application
Apply generous amount of a “construction grade” Adhesive (Gorilla Glue / Loctite) using a Glue gun. Addition of Silicon is recommended for humid conditions. This step helps in securing the materials together for a more robust construction. -
Step 3: Horizontal or Vertical Direction
Install the materials either horizontally or vertically as needed. Secure the pieces by screwing them onto the tongue or interlocking space, ensuring a sturdy and reliable fixing. -
Step 4: Cutting with Circular Saw
Utilize a circular saw (preferably a ceramic blade) to cut the materials to the required length. This ensures precision and accuracy in tailoring the components to fit the construction specifications. -
Step 5: Corner Assembly
For corners, combine the two grooves of the materials. This step ensures a seamless and tight fit at the corners, enhancing the overall structural integrity of the construction.
Decorative Ceiling Tiles, Inc.
1-866-297-0380
www.decorativeceilingtiles.net