ELEMENTAL MACHINES EB1 Element-B with Western Innovator LC and LCHP Series Manifold Installation Guide
- June 1, 2024
- ELEMENTAL MACHINES
Table of Contents
ELEMENTAL MACHINES EB1 Element-B with Western Innovator LC and LCHP
Series Manifold
Specifications:
- Models: EB1, EB2
- For Western Innovator LC and LCHP Series Manifold
Product Information
The Element-B is designed for use with Western Innovator LC and LCHP Series Manifolds. It includes a connection cable and a mounting plate for easy installation. Please review and adhere to the safety information provided in the Element-B and Western Innovator user manuals to ensure safe usage.
Package Contents:
- Element-B
- Connection Cable
- Mounting Plate
Installation Instructions
Receiving the Shipment
- Set up your Elemental Machines system and verify your dashboard account.
- Check for default device names on Elemental InsightsTM Dashboard upon device arrival.
- Inspect contents upon arrival and report any damages.
- Ensure Element-B is configured correctly (Normally Closed or Normally Open).
- Place Element-B within wireless range of an Elemental Machines Gateway.
Attaching Connection Cable to the Western Innovator Manifold:
- Locate the Power Supply Box for the manifold.
- Unplug the Power Supply Box from the wall power.
- Unscrew the screw located at the bottom of the Power Supply Box.
- Identify and loosen the screws for the N/O and COM slots inside the Power Supply Box.
- Insert wires into the N/O and COM slots and tighten the screws.
- Reassemble the Power Supply Box and plug it back into the wall power.
FAQ
Q: How do I know if my Element-B is configured as Normally Closed (NC) or Normally Open (NO)?
A: You can verify the configuration by checking the device label, the dashboard under ‘Machine Model’, or the packing list sent with your shipment.
Q: What should I do if my devices arrive damaged?
A: If any of the contents look damaged, please send a picture to help@elementalmachines.com for assistance.
Models: EB1, EB2
For Western Innovator LC and LCHP Series Manifold
Applicable Western Innovator Models
- LC Series
- LCHP Series
Package Contents
- Element-B
- Connection Cable
- Mounting Plate
Safety Information
Review and abide by the safety information found in the Element-B and Western Innovator user manuals. Ensure compliance with your company safety best practices, which may include de-energizing equipment before working with electrical connections. Tidy connection cable to prevent tripping hazards.
Installation Instructions
Receiving the Shipment
-
If this is your first time setting up the Elemental Machines system, you will receive an email for your dashboard account verification. Save this email for when the devices arrive.
-
When devices are shipped, they will be added to your Elemental Insights™ Dashboard with default names. When you first log in you will see all your devices with a ‘disconnected’ status.
-
When devices arrive, carefully remove the contents from the packaging. If any of the contents look damaged, please send a picture to help@elementalmachines.com.
-
If you have ordered multiple Element-B’s, ensure the Element-B being used is configured as Normally Closed (NC). This can be verified by checking the device label, the dashboard under ‘Machine Model’, or the packing list sent with your shipment.
a. Element-B’s can either be configured as Normally Closed (NC) or Normally Open (NO) by our team here at Elemental Machines. Different assets require different configurations. If you have ordered Element-B’s for multiple assets, you may have a mix and need to be aware of attaching the correctly configured device to the correct asset. -
Ensure there is an Elemental Machines Gateway set up in the vicinity of the Element-B.
- a. Depending on your location and application, your Gateway type may vary. If you have a tablet Gateway, brief setup instructions are given in the relevant Element-B user manual. If you have a Gateway Model GW2 or GW3, please follow the setup instructions in your Gateway, GW2 or GW3 User Manual
- b. Note: ‘Vicinity’ is within wireless connection range. This is usually up to 30 meters but can depend on the lab’s layout.
Attaching Connection Cable to the Western Innovator Manifold
- Locate the Power Supply Box for the manifold, as shown in Figure 1.
- Unplug the Power Supply Box from wall power.
- Unscrew the screw located towards the bottom of the Power Supply Box, circled in Figure 1.
- Locate the N/O and COM slots (Positions 6 and 7), circled in Figure 2, on the board inside the Power Supply Box.
-
Slightly loosen the screws for the N/O and COM slots. Insert either wire in either slot.
-
Tighten the screws to secure the wires.
-
Replace the cover on the Power Supply Box.
-
Secure the box with the screw on the bottom.
-
Plug in the Power Supply Box to wall power.
Attaching Connection Cable to Element -
Per your discretion, write the name and/or location of the equipment being monitored on the Element-B’s. This can be particularly helpful if multiple devices are being installed. Use of a Sharpie is recommended.
-
Plug the thermocouple ends of the connection cable into two Element-Bs. Either thermocouple end can go into either Element-B.
- a. Note Ensure the (-) and (+) prongs of the thermocouple end, shown in Figure 3, are properly matched.
-
Pull the battery tab on the Element-B.
Positioning the Element-B
- Determine where the Element-B should be placed so that it is not blocked, which allows a better wireless connection, and so that the connection cable is tidy.
- Securely position the Element-B in the chosen location. The Element-B has magnets which make it easily mountable to magnetic surfaces.
a. Note: If applicable, an adhesive metal mounting plate available from EM may be used.
Programming Alerts
- Refer to the Western Innovator user manual for which alarm conditions trigger the Western Innovator LC and LCHP Series Manifold.
- Set up alert rules on the Elemental Insights™ Dashboard for the Element-B. Guidance on how to do so is available in the Support section of the dashboard.
NOTE: Alerts must be programmed on the Elemental Insights™ Dashboard to receive threshold alerts through the Elemental Machines platform.
772-00070 rev 01 Element-B, EB1 EB2 Western Innovator LC and LCHP Series Manifold Installation Guide
Copyright © 2024 Elemental Machines help@elementalmachines.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>