ELMAG POWER ROD 250-T Cell MMA Welding Inverter Owner’s Manual
- June 1, 2024
- ELMAG
Table of Contents
ELMAG POWER ROD 250-T Cell MMA Welding Inverter
Specifications:
- Welding Electrodes Diameter: 1.6 – 5.0 mm
- Welding Current Setting: 10 – 250 A
- Open Circuit Voltage: 83 V
- Voltage / Phases: 400 / 3 V / ~
- Mains Frequency: 50 Hz
- Power Tolerance: Anti-surge fuse 10 AT
- Thermal Overload Protection: Yes
- Degree of Protection (IP): 23 S
- Input Power l1 max. / l1 eff.: 13.5 / 8.8 A
- Ground Connection Plug / Cross-Section: 13 / 35 Ω / mm2
Product Highlights:
The three-phase POWER ROD power sources allow professional welding of
coated electrodes using the HOT START and ARC FORCE functions. An absolute
POWER model with up to 250 amps of welding power, suitable for intensive HEAVY
DUTY use in trade and industry.
Materials:
- Steel
- CrNi
- Cast materials
Application Examples:
- Production, repair & assembly companies
- Pipeline construction
- Outdoor / offshore welding
- Steel construction
- Machine, plant & tank construction
- Building & civil engineering
Product Usage Instructions
Safety Precautions:
Always wear appropriate safety gear such as welding gloves, helmets, and
protective clothing.
Setup:
Ensure the device is connected to a suitable power source and that all
cables are securely connected.
Welding Process:
Select the appropriate welding electrode based on the material to be welded. Adjust the welding current setting according to the electrode diameter and material thickness.
Post-Welding:
Clean the welded area and inspect the weld for quality and strength.
FAQ:
-
Q: How do I register for a warranty?
A: Simply visit https://welding.cebora.it/de/assistance/register-your- product within 15 days of purchase to apply for up to 24 months warranty. -
Q: What types of materials can be welded using this inverter?
A: This inverter is suitable for welding steel, CrNi, and cast materials.
CEBORA MMA WELDING INVERTER
- POWER ROD 250/T cell, 400 volts, art. 514 (suitable for generator)
- APPLY NOW FOR UP TO 24 MONTHS’ WARRANTY!
- Simply register at https://welding.cebora.it/de/assistance/register-your-product within 15 days of purchase.
- CEBORA serial no.:
- Article Number: 58448
- EAN Code: 9004853584480
TECHNICAL FACTS
- E-manual welding electrodes up to Ø 5.0 mm
- ARC FORCE+: Optimisation of the arc dynamics
- HOT START+: Adjustable ignition current increase
- ANTI STICK: Welding current reduction in the event of a short circuit
- Operating mode button MMA/TIG / TIG PULSE
- LIFT TIG: optimal TIG ignition type with low ignition current
- Generator-compatible
- Powerful cooling fan
- REMOTE CONT: Welding current remote control connection (optional extras)
PRODUCT HIGHLIGHTS
Application examples
- Production, repair & assembly companies
- Pipeline construction
- Outdoor / offshore welding
- Steel construction
- Machine, plant & tank construction
- Building & civil engineering
POWER ROD 250/T Cell
The three-phase POWER ROD power sources allow professional welding of coated
electrodes using the HOT START and ARC FORCE functions. An absolute POWER
model with up to 250 amps of welding power, for intensive HEAVY DUTY use in
trade and industr
Materials
- Steel
- CrNi
- Cast materials
Electrodes
- Ø 1.6 – 5.0 mm
- Rutile (R), Rutile basic (RB), Basic (B), Rutile cellulose (RC), Cellulose (C)
SPECIFICATIONS
| welding electrodes diameter | 1,6 – 5,0 mm |
|---|---|
| welding current setting | 10 – 250 A |
| 100 % welding power source (10 min at 40 °C) at welding current |
190 A
60 % welding power source (10 min. at 20 °C) at welding current|
210 A
welding power source (10 min at 40 °C) at welding current| 30 / 250 % / A
Open circuit voltage| 83 V
voltage/phases| 400 / 3 V / ~
Mains frequency| 50 Hz
power tolerance| ± 10 %
anti-surge fuse| 10 AT
thermal overload protection| Yes
Degree of protection (IP)| 23 S
input power l1 max. / l1 eff.| 13,5 / 8,8 A
ground connection plug/cross-section| 13 / 35 O / mm2
connector| CEE 16 A
---|---
Width| 207 mm
Depth| 437 mm
Height| 411 mm
Weight| 16 kg
Start-up Service
Including ELMAG”‘-Quality Check
- Depreservation, degreasing and de-securing
- Assembly until ready for use
- Oil filling of gearboxes, oil baths and central lubrication systems
- Testing of electrics, safety components and devices
- Test run on all shift and power levels
- 30-minute test run at the highest power level
- Checking and, if necessary, adjusting machine tolerances,
- e.g. V-belt tension and spindle concentricity
- Testing of all machine functions
For lathes, in addition:
- Lathe chuck reassembly with the marking of minimum tolerance
- Measurement of the spindle nose to tolerance < 0.01 mm
- Measurement of the lathe chuck
- Setting the tailstock parallelism
For MIG/MAG/MMA/WIG welding, plasma cutting & induction heating equipment (depending on the type of equipment)
- Assembly of the unit, chassis assembly
- Intermediate hose assembly
- Mains plug assembly and gas hose assembly
- Connection preparation for gas or compressed air
- Control cable plug Assembly on hose assembly
- Installation & activation of water cooling unit for modular systems
- Filling with cooling liquid for liquid-cooled units
- Short test run or test welding
Competent execution guaranteed
Documents / Resources
|
ELMAG POWER ROD 250-T Cell MMA Welding
Inverter
[pdf] Owner's Manual
POWER ROD 250-T Cell MMA Welding Inverter, POWER ROD 250-T Cell, MMA Welding
Inverter, Welding Inverter, Inverter
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>