mini MN31 TRANSCEIVER FM RADIO User Manual
- June 5, 2024
- Mini
Table of Contents
mini MN31 TRANSCEIVER FM RADIO User Manual
Accessories and optional accessories
Welcome to this new walkie-talkie! Please carefully open the box and make sure it is inside Are there items listed below, including accessories. If you find that this product and its accessories are being moved If anything is missing or damaged during shipment, please contact your dealer immediately.
Random Accessories
Channel List :
Understand the product
Basic operation
Switch key: long press 3S to turn on; long press 3S to turn off.
Illumination lamp: short light on; short light off again.
Up key+ monitor key: short press default is volume plus one division, 8 levels
in total; long press this key is monitor key.
Scroll down key: Short press the default to decrease the volume by one
space;
Channel selection key: Long press to hear “beep” to enter the channel
selection function, and then press the up/ down key to select all Required
channel, determined by PTT.
PTT key: Press the PTT key to talk when the red light is on, release to
receive.
VOX voice control: The channel is set to 1-9 channels. When the power is
off, press and hold the side button (lowermost button) and then turn on. One
beep and beep indicate that voice control is on, and two beep and beep
indicate that voice control is off.
(The voice control will be turned on, and the channel on which it is located
is the level of voice control. Level 1 is the least sensitive. Closer or
louder, 9 levels are the most sensitive)
Basic operation
Switch key: long press 3S to turn on; long press 3S to tum off.
Illumination lamp: short light on; short light off again.
Up key+ monitor key: short press default is volume plus one division, 8 levels
in total; long press this key is monitor key.
Scroll down key: Short press the default to decrease the volume by one
space;
Channel selection key: Long press to hear “beep” to enter the channel
selection function, and then press the up/ down key to select all Required
channel, determined by PTT.
PTT key: Press the PTT key to talk when the red light is on, release to
receive.
VOX voice control: The channel is set to 1-9 channels. When the power is
off, press and hold the side button (lowermost button) and then turn on. One
beep and beep indicate that voice control is on, and two beep and beep
indicate that voice control is off.
(The voice control will be turned on, and the channel on which it is located
is the level of voice control. Level 1 is the least sensitive. Closer or
louder, 9 levels are the most sensitive)
Basic operation
Switch key: long press 3S to turn on; long press 3S to turn off.
Monitor key: Press and hold this key for the monitor key.
Keyboard lock: Long press to hear “DI”, the keyboard is locked; long
press again to hear “DI”, the keyboard is unlocked.
PTT key: Press the PTT key to talk when the red light is on, release to
receive.
VOX voice control: the channel is set to 1-9 channels, in the off state,
long press the keyboard (channel increment key) and then turn on,
One beep and beep indicate that voice control is on, and two beep and beep
indicate that voice control is off. (will Turn on voice control, the channel
is the level of voice control, level 1 is the least sensitive and needs to be
close to the machine or the sound Sound louder, level 9 is the most sensitive)
Basic operation
Switch key: long press 3S to turn on; long press 3S to turn off.
Monitor key: Press and hold this key for the monitor key.
Keyboard lock: Long press to hear “DI”, the keyboard is locked; long
press again to hear “DI”, the keyboard is unlocked.
PTT key: Press the PTT key to talk when the red light is on, release to
receive.
VOX voice control: the channel is set to 1-9 channels, in the off state,
long press the keyboard (channel increment key) and then turn on, One beep and
beep indicate that voice control is on, and two beep and beep indicate that
voice control is off. (will Turn on voice control, the channel is the level of
voice control, level 1 is the least sensitive and needs to be close to the
machine or the sound Sound louder, level 9 is the most sensitive)
Technical specifications
Note: As technology advances, design and product specifications may change without notice.
WARRANTY CARD
Model No: __
Serial No.: ____
Purchase Date: _
Local Dealer: __
User Name: _
Address:
Telephone:
Telephone: __
Zip Code: ___
RAMARK:
- Please reserve this WARRANTY CARD for warranty.
- An effective Warranty Card must bear the stamp of the dealer and Purchase Date.
- Warranty for 12 months for the radio body. (Antenna / Battery / Charger are not in this warranty)
Licensing Information
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the condition that this device does not cause harmful interference.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference
that may cause undesired operation.
This radio complies with IEEE and ICNIRP exposure limits for General
Population/Uncontrolled Environments RF exposure environment at operating duty
factors of up to 50% and is authorized by the FCC for General Population use
only. An appropriate warning label is affixed to all units. In order to comply
with RF exposure requirements, a minimum distance of 2.5 cm must be maintained
when held-to-face, and body-worn operations are restricted to the approved
original accessories (belt clip), a minimum distance of 0 cm. Do not use this
device when antenna shows obvious damages.
MODIFICATION OF THIS DEVICE TO RECEIVE CELLULAR RADIOTELEPHONE SERVICE SIGNALS IS PROHIBITED UNDER FCC RULES AND FEDERAL LAW.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>