Bissell Crosswave Instructions: User Manual for Hard Floors & Area Rugs
- June 7, 2024
- Bissell
Table of Contents
The Bissell Crosswave Vacuum is a versatile cleaning machine that can be used on both hard floors and area rugs. To ensure proper usage and safety, it is important to refer to the enclosed user guide for complete instructions and important safety notices. The quick start usage instructions provide a simple guide to get started with the machine, including filling the clean water tank with warm tap water and formula, aligning the tank with the grooves on the back of the machine, and selecting the type of floor to be cleaned. The product expert recommends holding the solution trigger for 10 seconds to prime the system with the cleaning solution before beginning cleaning. The manual also includes tips and tricks for getting the best clean from the CrossWave™, such as using the Easy Clean Storage Tray to rinse the brush roll before cleaning area rugs and activating RUG mode for overly challenging and stuck-on messes on hard floors. The FAQ section provides answers to common questions about the machine, such as how to get the solution to come out of the machine and how long the battery lasts. With proper usage and maintenance, the Bissell Crosswave Vacuum can provide efficient and effective cleaning results for your home.
Bissell Crosswave Vacuum
Bissell Crosswave Vacuum
QUICKSTART GUIDE
1785 SERIES
Quick Start Usage Instructions
WARNING
Refer to the enclosed user guide for complete instructions and important
safety notices.
- First, insert the handle at the top of the body of the machine until you hear a click.
- For small area cleaning (<350 sq ft), fill the clean water tank with warm tap water to the first water fill line. Then add formula to the first formula fill line. For large area cleaning (up to 700 sq ft), fill the clean water tank with warm tap water to the second water fill line. Then add the formula until you get to the second formula fill line. Screw the cap back onto the clean water tank.
- On the back of the machine, align the clean water tank with the grooves and slide the tank into place until you hear a click.
- Turn the machine on by selecting the type of floor you will be cleaning. For hard floors, choose the HARD FLOOR button and or area rugs to push the RUG button.
- Each time you use the product, hold the solution trigger for 10 seconds to prime the system with the cleaning solution before you begin cleaning. When you pull the trigger, LED lights will illuminate.
When the solution is flowing, you will see bubbles forming at the edges of the brush roll window.
You are ready to start cleaning with your BISSELL® CrossWave!™
Getting the Best Clean from Your CrossWave™
For every day Cleaning:
HARD FLOORS & RUGS
Choose the setting that matches the floor type you will be cleaning. Prime the
system first by holding the solution spray trigger for 10 seconds. When you’re
ready to clean, hold the trigger on both the forward and backward pass for
great cleaning results.
Dirty Machine?
EASY CLEANUP
For best results, rinse the dirty water tank, brush roll, and brush chamber
after each use. After allowing your machine and components to dry completely,
reassemble your product, making sure the machine’s brush window is securely in
place before leaning.
Tips & Tricks
- On hard floors, there is no need to vacuum before using CrossWave™.This machine vacuums and washes at the same time.
- To dry floors faster, release the trigger and run the machine over the floor without dispensing the solution.
- When cleaning area rugs, remove any excess mud from your area rug prior to using your CrossWave™.
- When cleaning excessively dirty or muddy hard floors, or if the brush roll looks dirty, use the Easy Clean Storage Tray to rinse the brush roll before cleaning your area rugs.
- For overly challenging and stuck-on messes on hard floors, activate the RUG mode and hold your CrossWave™ over the mess. Using short passes while holding the trigger allows the multi-surface brush to go to work.
For further instructions
- reference the User Guide or visit: www.BISSELL.com
Specifications
| Product Specifications | Description |
|---|---|
| Product Name | Bissell Crosswave Vacuum |
| Product Type | Vacuum and Multi-surface Cleaner |
| Usage | Hard Floors and Area Rugs |
| Water Tank Capacity | Small Area Cleaning: Fill with warm tap water to the |
first water fill line. Large Area Cleaning: Fill with warm tap water to the
second water fill line.
Formula Tank Capacity| Small Area Cleaning: Add formula to the first formula
fill line. Large Area Cleaning: Add formula until you get to the second
formula fill line.
Battery Life| Around 25 minutes of use
Warranty| 4 Year Limited Warranty
FAQ’S
How do I get the solution to come out of the machine?
Make sure you are pressing the trigger for 10 seconds and that you have selected the correct floor type.
Why is there a yellow light flashing?
This means that the machine is still priming. You will see bubbles forming at the edges of the brush roll window. When you see this, you can begin cleaning.
What if I don’t see any bubbles?
If you don’t see any bubbles, this may mean that your water tank is not properly connected to the machine. Make sure that it is properly attached by aligning the grooves on the water tank with the tabs on the back of the machine and sliding it into place until you hear a click. Also, make sure that your water tank is filled to either the first or second water fill line.
What if I see red lights flashing?
This means that there is a problem with your water tank or cleaning solution tank. Make sure that your tanks are properly connected to your machine and that they are filled to either the first or second fill line. If it continues to flash red after checking these things, please contact customer service at 1-800-762-6337 for assistance.
What if I see green lights flashing?
This means that there is a problem with your floor type selection. If you have selected HARD FLOOR, make sure that you have pressed down on HARD FLOOR button and then select HARD FLOOR again by pressing down on it again. If you have selected RUG, make sure that you have pressed down on RUG button and then select RUG again by pressing down on it again. If it continues to flash green after checking these things, please contact customer service at 1-800-762-6337 for assistance.
Does the Bissell CrossWave vacuum and mop at the same time?
No need to vacuum and then mop. CrossWave® multi-surface cleaner vacuums and washes floors at the same time, picking up wet and dry debris.
Why is my crosswave leaving dirty water on the floor?
If you find your floors are wetter than you like, release the spray trigger and make a few dry passes to help recover excess water and dry your floors faster. Switching to hard floor mode from area rug mode will also reduce the amount of solution dispensed on your floors. The clean water tank may also be leaking.
Does Bissell CrossWave have a filter?
Bissell cross wave wet/dry filter replacement. Easily replace when dirty. Refer to your owners manual for replacement instructions.
How long does Bissell CrossWave battery last?
The internal battery lasts around 25 minutes of use, after which you have to wait four hours for it to recharge. With that amount of time, I found there was enough battery life to cover my downstairs, but I’d have to recharge to tackle the other floors.
Can you overcharge Bissell CrossWave?
WARNING Overcharging may cause battery damage, fire or explosion. TIP: Be sure
to charge unit when there is less than 10% power left, one LED flashing red.
Your BISSELL® CrossWave® Cordless has a How long is Bissell warranty?
Battery LED light display that will turn on when the unit is ON or charging to
show the battery life status.
How long is Bissell warranty?
Warranty Guide: 4 Year Limited Warranty.
Why did my BISSELL vacuum stopped working?
Vacuum problems often call for the most basic of solutions. If your Bissell PowerForce doesn’t power on at all when plugged in, check the fuse box for a blown fuse or tripped breaker. For vacs that feel sluggish, turn the knob near the foot of the device to adjust the PowerForce’s height.
VIDEO
Bissell Crosswave Vacuum
www://bissell.com/