LASER WLC-W3PTF-675 3 in 1 Travel Wireless Charging Pad User Manual
- June 1, 2024
- Laser
Table of Contents
LASER WLC-W3PTF-675 3 in 1 Travel Wireless Charging Pad
WHAT’S IN THE BOX
- Wireless charging pad
- USB-C to USB-C charging cable
- User manual
Required: A compatible 18W or higher USB-C wall charger for optimal charging performance.
OVERVIEW
OPERATION
- As shown below, place the charging pad flat or folded on a level surface.
- Plug the charging cable into the USB-C port on the centre pad. Connect the other end to a wall charger. We recommend using an 18W or higher Power Delivery or GaN wall charger. The two blue indicators next to the USB-C port will light up for 3 seconds.
- Place your mobile phone or earphones on either side pad. The indicator will turn blue when charging begins.
- Position your Apple watch on the central pad to charge. Alternatively, lift the centre charging pad to hang your Apple watch.
- If the indicator flashes blue, adjust your device’s position or remove any foreign objects from the charging surface until the indicator stays solid blue.
CHARGING TIPS
- *The centre wireless charging pad is exclusively compatible with Apple Watch and will not charge other wireless charging watches.
- Avoid overcharging devices. Disconnect them when they reach 100% charge to maintain long term battery health.
- Don’t expose the charger to direct sunlight or temperatures above 45°C to prevent overheating.
- Check your devices regularly while charging to catch any issues that may arise.
- Keep charging pads clean with a dry micro fibre cloth to ensure optimal charging efficiency by removing dirt and debris.
WARNINGS
- Keep this away from kids – it’s not a toy.
- Don’t leave devices charging alone for too long to avoid overheating.
- Avoid charging wet or damp devices to prevent electric shock or short-circuiting.
- Keep credit cards, security badges, passports or any magnetic strips away from the charger when it is in use.
TROUBLESHOOTING
SLOW OR INTERMITTENT CHARGING:
- Check for any obstructions or cards/metal on the back of the device.
- Reposition the device to the centre of the charging pads.
- Phone cases should be less than 5mm thick.
- Use a power adaptor that matches the input and output ratings listed in the specifications.
NO CHARGING:
- Restart your device.
- Use a different cable between the adaptor and wireless charger.
- Verify if your phone supports wireless charging and try another phone.
- Use a power adaptor that matches the input and output ratings listed in the specifications.
OVERHEATING:
- It’s normal for the charging coil to generate some heat during use. If it gets too hot, remove the device until it cools down.
- Use a power adaptor that matches the input and output ratings listed in the specifications.
SPECIFICATIONS
- Power output – L/R side pads: 5W/7.5W/10W/15W
- Power output – Centre pad (for Apple Watch only): 3W
- Power input – DC: 5V/3A, 9V/2A, 12V/2A
- Dimension (L×W×H): 247×74.5×7.5mm
CUSTOMER SUPPORT
Product support:
E: support@laserco.com.au
P: (02) 9870 3355
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>