NCASE M1 Flipped Configuration Instruction Manual
- June 1, 2024
- NCASE
Table of Contents
NCASE M1 Flipped Configuration
Specifications:
- Screw-5: M3 Flat Sunk Screw
- ThumbScrew-10: M3 Thumb Screw
- Standoff-6: M3 Female Standoff Screw
- CScrew-8: M3 Countersunk Screw
Product Usage Instructions
Assembly Steps:
- Ensure not to overtighten screws. Stop tightening once resistance is felt, do not exceed one-quarter turn.
- Identify different fasteners by placing them next to each other.
- Follow the provided Flatpack Assembly Manual for step-by-step instructions.
Installation Steps:
- Remove any existing components as per the manual.
- Install the specified components in the correct positions.
- Repeat the process for all necessary parts.
Additional Instructions:
- When lifting parts, ensure to lift 1mm first before proceeding.
Frequently Asked Questions
Q: What should I do if I encounter difficulties during assembly?
A: If you face challenges during assembly, refer back to the manual for detailed instructions. If problems persist, contact customer support for assistance.
Q: Can I use tools other than those provided for assembly?
A: It is recommended to use the tools provided in the assembly kit to avoid damaging the product or components. Using alternative tools may not be suitable.
Flatpack Assembly Manual
CAUTION: do NOT overtighten screws. Once resistance is encountered, do not
tighten more than one-quarter turn.
Each fastener is different in length or head-shape, and putting them next to
each other is an excellent way to identify them.
