NCASE M3 Series Classic Configuration Small Form Factor Instruction Manual
- June 1, 2024
- NCASE
Table of Contents
NCASE M3 Series Classic Configuration Small Form Factor
Product Information
Specifications:
- M1 Classic Configuration
- Flatpack Assembly Manual
- Includes various screws: M3 Flat Sunk Screw, M3 Thumb Screw, M3 Female Standoff Screw, M3 Countersunk Screw
Product Usage Instructions
Assembly Guidelines:
CAUTION: do NOT overtighten screws. Once resistance is encountered, do not tighten more than one-quarter turn. Each fastener is different in length or head-shape, and putting them next to each other is an excellent way to identify them.
Step-by-Step Assembly:
- Remove the components as per the manual instructions.
- Install the specified screws according to the provided quantities.
- Follow the manual for specific placements of M3-FS-5, M3-CS-8, M3-FSS-6, and other screws.
- Ensure proper alignment and positioning of all parts.
- Finish the assembly by lifting 1mm first before finalizing the setup.
FAQs
Q: Can I use a power tool to tighten the screws during assembly?
A: It is not recommended to use power tools as they may lead to overtightening. Hand-tighten the screws as per the provided guidelines.
Q: What should I do if I encounter difficulty in identifying the different types of screws?
A: Place the screws next to each other to visually compare their lengths and head shapes. Refer to the manual for guidance on matching the screws to their designated locations.
Q: Is it necessary to follow the sequence mentioned in the manual?
A: Yes, it is recommended to follow the step-by-step instructions provided in the assembly manual to ensure proper assembly and structural integrity of the product.
M1 Classic Configuration
Flatpack Assembly Manual
CAUTION: do NOT overtighten screws. Once resistance is encountered, do not
tighten more than one-quarter turn.
Each fastener is different in length or head-shape, and putting them next to
each other is an excellent way to identify them.
