NCASE T1 Sandwich Kit Instruction Manual

NCASE T1 Sandwich Kit

Product Specifications:

• Product Name: Sandwich Kit Version 2.5
• Compatibility: Works for various GPU slot sizes
• Components: Front Panel, Rear Panel, Top Panel, Bottom Panel, AOI Bracket x2, Fan Bracket x2, Top Strut, Side Struts x2, Riser Bar, Power Cable, SFX PSU Bracket, Case Feet x4, Pcie 4.0 Riser Cable, Side Panels x2

Product Usage Instructions

1. Choosing Standoff Based on GPU Thickness:
   Refer to the following guide to choose the appropriate standoff based on your GPU slot size:

2. 1.25 GPU Slot : Standoff-5

3. 1.5 GPU Slot: Standoff-10

4. 2 GPU Slot: Standoff-20

5. 2.25 GPU Slot : Standoff-5 + Standoff-20

6. 2.5 GPU Slot : Standoff-30

7. 2.75 GPU Slot : Standoff-5 + Standoff-30

8. 3 GPU Slot : Standoff-40

9. 3.25 GPU Slot : Standoff-5 + Standoff-40

10. Assembly Instructions:

11. Start by assembling the Front Panel, Rear Panel, Top Panel, and Bottom Panel together.

12. Attach the AOI Brackets and Fan Brackets as needed.

13. Add the Top Strut and Side Struts to the assembly.

14. Install the Riser Bar and secure it in place.

15. Mount the Power Cable and SFX PSU Bracket accordingly.

16. Affix the Case Feet to the bottom of the assembly for stability.

17. Connect the Pcie 4.0 Riser Cable as required

18. Finally, attach the Side Panels to complete the assembly.

Frequently Asked Questions (FAQ):

1. Q: Are all necessary screws and accessories included in the kit?
   A: The kit includes various screws such as M3 Countersunk Screws, M3 Flat Sunk Screws, M3 Standoff Screws of different lengths, and M3 ThumbScrews. However, please note that a #6-32 screw for power supply installation and M5 x 8 screws for fan installation are not included.

2. Q: Can I use the M3 Countersunk Screw for all steps in the assembly process?
   A: The M3 Countersunk Screw is specifically designed for countersunk holes and provides a slightly stronger lock. While it can be used for most steps in the assembly process, it is recommended to use the appropriate screws as mentioned in the manual for a smoother build experience.

Sandwich Kit Version 2.5
Flatpack Assembly Manual

Flatpack Assembly Manual

• Screw-6
• M3 Countersunk Screw
  • This screw only works for countersunk holes. This screw allows for a slightly stronger lock.
• OR
• Screw-5
• M3 Flat Sunk Screw
  • This screw works for most of the steps in this manual. One screw type makes for an easier build experience.
• Standoff-5
  • M3 Standoff Screw-5
• Standoff-6
  • M3 Standoff Screw-6
• Standoff-10
  • M3 Standoff Screw-10
• Standoff-20
  • M3 Standoff Screw-20
• Standoff-30
  • M3 Standoff Screw-30
• Standoff-40
  • M3 Standoff Screw-40
• ThumbScrew-10
  • M3 Thumb Screw

Extra Accessory

• 15 Fan + Radiator Strut
• 16 Fan + Radiator Bracket
• 17 Glass Window Panel

Parts

1. Front Panel SW
2. Rear Panel SW
3. Top Panel
4. Bottom Panel
5. AOI Bracket x2
6. Fan Bracket x2
7. Top Strut
8. Side Struts x2
9. Riser Bar
10. Power Cable
11. SFX PSU Bracket 12 Case Feet x4
12. Pcie 4.0 Riser Cable 14 Side Panels x2
    
    

T1 Sandwich Kit Version 2.5

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>