NCASE M2 Grater Version Installation Guide

: August 30, 2024
: NCASE

Table of Contents

M2 Grater Version
Product Specifications:
Product Usage Instructions:
Assembly Guidelines:
Screw Types:
Configuration:
Installation Steps:
Drive Installation:

M2 Grater Version

“`html

Product Specifications:

Model: M2
Components: Front Panel, Rear Panel, Motherboard Tray, Fan +
Radiator Bracket, Side Panels x2, Top Panel, Bottom Panel, Power
Supply Brackets, Power Supply Inlet Cable
Additional Accessories: Glass Window Panel, Slotted Window
Panel, Power Supply Bracket – ATX, Front Cover – Round, Front Cover
– Angle, Tall Feet, VGPU Kit (includes PCle Riser Cable +
Bracket)
Screws: M3 Flat Sunk Screw, M3 Countersunk Screw, M3
PowerSupplyBracket Screw, M3 FemaleStandoff Screw, M3 Thumb
Screw

Product Usage Instructions:

Assembly Guidelines:

1. Do NOT overtighten screws. Once resistance is encountered, do
not tighten more than one-quarter turn.

2. Each fastener is different in length or head-shape. Putting
them next to each other helps in identifying them.

Screw Types:

– M3 Flat Sunk Screw: Works for all steps in the manual.
One-screw-fits-all for easier building.

– M3 Countersunk Screw: Works only for countersunk holes and
provides a slightly stronger lock.

– M3 PowerSupplyBracket Screw: Specifically designed for power
supply brackets.

– M3 FemaleStandoff Screw: Used as standoffs.

– M3 Thumb Screw: Used as thumbscrews.

Configuration:

Flipped Configuration: Follow X2 X1 or X1 sequence
Classic Configuration: Follow X2 sequence
VGPU Configuration: Follow X2 X1 or X1 sequence

Installation Steps:

1. Install by pushing down the components.

2. Side panels are slightly curved for a tighter fit. Lift 1mm
first before removing.

3. Step 1: Install Side Panel

4. Step 2: Install Top Panel

Drive Installation:

– For 2.5 Inch Drives and 3.5 Inch Drives, follow the provided
guidelines in the manual.

FAQ:

Q: Can I use different screws interchangeably?

A: No, each screw type is designed for specific purposes as
mentioned in the manual. Using the wrong screw may lead to assembly
issues.

Q: What is the recommended method to secure the GPU?

A: Do NOT remove screws from the Rear Panel to secure the GPU.
Follow the instructions provided for securing the GPU Plate and GPU
LockBar in the correct orientations.

Q: How should I handle the side panels for installation?

A: The side panels are slightly curved for a tighter fit. Lift
them 1mm first before attempting to remove them for installation
purposes.

“`

M2
Flatpack Assembly Manual

Flatpack Assembly Manual

5

6 7

13
17
14 11
15 16
12 12

8 9

Extra Accessory
11 Glass Window Panel 12 Slotted Window Panel 13 Power Supply Bracket – ATX 14 Front l0 Cover – Round 15 Front l0 Cover – Angle 16 Tall Feet 17 VGPU Kit
(lnclude PCle Riser Cable + Bracket)

4
3
1 2
Parts
1 Front Panel 2 Rear Panel 3 Motherboard Tray 4 Fan + Radiator Bracket 5 Side Panels x2 6 Top Panel 7 Bottom Panel 8 Power Supply Bracket – SFX 9 Power Supply Inlet Cable

Flatpack Assembly Manual
DO NOT overtighten screws. Once resistance is encountered, do not tighten more than one-quarter turn.
Each fastener is different in length or head-shape, and putting them next to each other is a good way to identify them.

Screw-5
M3 Flat Sunk Screw
This screw works for all of the steps in this manual. One-screw-fits-all is easier to build.
This screw is custom designed to work with both regular and countersunk holes.

OR

CScrew-6
M3 Countersunk Screw
This screw only works for countersunk holes, and has a slightly stronger lock.

CScrew-4
M3 Countersunk Screw
PSbracket-10
M3 PowerSupplyBracket Screw

Standoff-6
M3 FemaleStandoff Screw
Thumbscrew-10
M3 Thumb Screw

Flatpack Assembly Manual

M2
Flipped Configuration

X2 X1 or X1

Flatpack Assembly Manual

X2 or X2

Flatpack Assembly Manual

Flatpack Assembly Manual
D0 NOT remove theese screws from the Rear Panel to secure the GPU!

X4