NCASE 2.5 T1 Sand Wich Kit Instruction Manual

: August 31, 2024
: NCASE

Table of Contents

2.5 T1 Sand Wich Kit
Specifications:
Product Usage Instructions:
Step 1: Parts Identification
Step 2: Standoff Selection
Step 3: Assembly Process
Step 4: Additional Accessories

2.5 T1 Sand Wich Kit

“`html

Specifications:

Product Name: T1 Sandwich Kit Version 2.5
Assembly Type: Flatpack
Screw Types:
- M3 Countersunk Screw (Screw-6)
- M3 Flat Sunk Screw (Screw-5)
- M3 ThumbScrew (ThumbScrew-10)
Standoff Sizes: M3 Standoff Screws in various lengths

Product Usage Instructions:

Step 1: Parts Identification

Identify the different parts of the T1 Sandwich Kit Version 2.5
as listed in the manual, including panels, brackets, struts,
standoffs, and screws.

Step 2: Standoff Selection

Choose the appropriate standoff based on your GPU thickness.
Refer to the manual for the recommended standoff for your GPU slot
size.

Step 3: Assembly Process

Follow the detailed assembly steps provided in the Flatpack
Assembly Manual. Use the specified screws for each type of hole –
countersunk or flat sunk. Utilize the ThumbScrews where required
for easy adjustments.

Step 4: Additional Accessories

If you have additional accessories like the Fan + Radiator Strut
or Glass Window Panel, install them according to the provided
instructions.

Frequently Asked Questions (FAQ):

Q: Which screw should I use for countersunk holes?

A: For countersunk holes, use the M3 Countersunk Screw (Screw-6)
for a stronger lock.

Q: How do I choose the right standoff for my GPU?

A: Refer to the GPU slot size guide in the manual to select the
appropriate M3 Standoff Screw length for your GPU thickness.

Q: Are all necessary screws included in the kit?

A: While most screws are included, please note that the #6-32
screw for power supply installation and M5 x 8 screw for fan
installation are not included and may need to be sourced
separately.

“`

BY
Sandwich Kit Version 2.5
Flatpack Assembly Manual

Flatpack Assembly Manual

Screw-6
M3 Countersunk Screw
This screw only works for countersunk holes. This screw allows for a slightly stronger lock.
OR
Screw-5
M3 Flat Sunk Screw
This screw works for most of the steps in this manual. One screw type makes for an easier build experience.

Standoff-5
M3 Standoff Screw-5
Standoff-6
M3 Standoff Screw-6
Standoff-10
M3 Standoff Screw-10
Standoff-20
M3 Standoff Screw-20
Standoff-30
M3 Standoff Screw-30
Standoff-40
M3 Standoff Screw-40
1 TT11 SSaannddwwiicchh KKiitt VVeerrssiioonn 22..55

ThumbScrew-10
M3 ThumbScrew

Flatpack Assembly Manual

Extra Accessory
15 Fan + Radiator Strut 16 Fan + Radiator Bracket 17 Glass Window Panel
13 9
11 14

15

16
17 5
6 7 8

Parts
1 Front Panel SW 2 Rear Panel SW 3 Top Panel 4 Bottom Panel 5 AIO Bracket x2 6 Fan Bracket x2 7 Top Strut 8 Side Struts x2 9 Riser Bar 10 Power Cable 11 SFX PSU Bracket 12 Case Feet x4 13 Pcie 4.0 Riser Cable 14 Side Panels x2

10

1

2 12

3 4

2 T1 Sandwich Kit Version 2.5

Flatpack Assembly Manual

3 T1 Sandwich Kit Version 2.5

Choose Standoff based on your GPU Thickness
1.25 GPU Slot [Standoff-5] 1.5 GPU Slot [Standoff-10] 2 GPU Slot [Standoff-20] 2.25 GPU Slot [Standoff-5] + [Standoff-20] 2.5 GPU Slot [Standoff-30] 2.75 GPU Slot [Standoff-5] + [Standoff-30] 3 GPU Slot [Standoff-40] 3.25 GPU Slot [Standoff-5] + [Standoff-40]

X2

or

M3-FS-5

M3-CS-6

T1 Sandwich Kit Version 2.5

Standoff-40 Standoff-30 Standoff-20 Standoff-10 Standoff-5
T1 Sandwich Kit Version 2.5

X3
M3-FS-5 4
T1 Sandwich Kit Version 2.5

Flatpack Assembly Manual

5 T1 Sandwich Kit Version 2.5

X2

or

M3-FS-5