MONSTER Airmars XKT18 Wireless Gaming Headphone Instruction Manual
- June 1, 2024
- Monster
Table of Contents
MONSTER Airmars XKT18 Wireless Gaming Headphone
Monster Airmars XKT18
Wireless Gaming Headphones instruction manual
Product parameters
- Bluetooth version V5.3
- Transmission distance 10m
- Driver diameter 13mm
- Driver impedance -32 +15%
- Sensitivity 107.22 + 3dB
- Frequency response- 20Hz-20kHz
- Battery capacity (charging case)- 400mAh 3.7V
- Battery capacity (headphone)- 35mAh 3.7V
- Charging time(charging case) 1.5 hours
- Music playtime (headphone) – 5.5 hours
- Music playtime with charging case 22 hours
Packing list
Product Schematic Description
Charge the charging case
Connect the charging case to the 5V power adapter with Type-C charging cable.
Tips: When the ice blue indicator flashes while closing the cover, please charge in time.
Indicator Guide
Product operating instructions
- Power on
- Method 1 :Take out the headphones from charging case, the headphones will turr on automatically.
- Method 2 : Long press MFB for 3 seconds.
- Power off
- Method 1 : Put the headphones into the charging case and close the cover.
- Method 2 : After disconnected from the bluetooth device for 3 minutes.
- Pairing
- Step 1 : Take out the headphones from the charging case, the headphones will start pairing automatically.
- Step 2 :Search and click for “Monster Airmars XKT18 ” on the bluetooth list of the smart device, and when connection is successful, “Connected” will be heard.
- If the distance is exceeded, return to the effective distance within 3 minutes after disconnection, and automatically connect the device
Note
- If the product is not suitable for a long time, it should be fully charged and ensure that the device is in a shutdown state.
- After charging, please pull out the charging cable to avoid equipment damage caused by long-time charging.
Dual mode connection
The headphone can switch between music and gaming modes (via a wireless connector or Bluetooth).
- — 2.4G Bluetooth TX Connector (Type-C Port Connector)
- TX pair connection Plug in the TX, switch the headset to game mode, and connect successfully. The factory headset and TX require binding and pairing. (Note: Music mode and game mode, users can only use one connection mode at the same time)
- TX status call In the TX working state, voice calls need to be picked up through the headset MIC. In the working state, voice calls need to be picked up through the headset MIC.
- TX callback – In the headset and TX overdistance, or after the headset is turned on, it needs to be able to quickly connect back, TX is in the power supply state, to continue to keep the connection state.
- TX Manual disconnect – Manually unplug TX, Automatically switch the music connection mode;
Touch key operation
Normal
Music mode
Phone
Game mode/Music mode switch: Device connected
Precautions
- Headphone will turn on automatically (needless to press any button) pair and connect the device when the charging case is opened. After placing the headphone in the charging case, they will turn off and automatic charging will start when the cover is closed.
- Charging every 15 days will extend battery life when not in use often. Cleaning off dirt on the charging contacts by cotton swabs with alcohol will maintain a good contact for charging.
- Battery [Battery pack or battery combination ] Do not expose to lighting, baking or similar overheating environment. Do not disassemble, impact, squeeze or put into fire; Do not continue to use if severe swelling occurs; Do not place in high temperature environment; Do not use after soaking in water.
- Due to the wireless connection mode of this product, in the daily use process, influenced by the environment, mobile phone brand, usage behavior and other factors, it is normal that there may be a brief and slight sound delay in the process of playing music.
Warnings
- Do not use headphones at high volume for an extended period of time.
- Keep the headphones away from dust and water.
- Do not disassemble the headphones and accessories, otherwise warranty will be voided
- Keep headphones away from any impact or vibration.
- Do not use any chemical solvents or cleaning agent on the headphones.
This table is compiled according to SJ/T 11364.
0 : Indicates that this hazardous substance contained in all of the
homogeneous materials for this part is below the limit requirement in GB/T
26572.
X: Indicates that this hazardous subatance contained in at least one of
the homogeneous materials used for this part is above the limit requirement in
GB/T 26572.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
FCC ID : 2A8PV-OsMxKT18
Environment Friendly Use Period (EFUP)
The period of use of this symbol (10 years) is the period during which harmful
substances in electronic and electrical products will not leak or mutate under
normal use conditions, and users of electronic products will not cause serious
pollution to the environment or serious damage to their personal and property
when using this electronic product.
Warranty service
Dear user, this warranty card is the proof of your future warranty application with the seller to fill it out and keep it for future use!
Certificate of approval
- Product No.
- Production
- Time: OC: